This service is used to get, set, and unset system
environment variables.
Note: shell parameter expansion is not supported
at this time.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Support getting and setting POSIX environment variables.
Additionally, the thread-safe BSD variant getenv_r() is
provided.
environ, getenv(), setenv(), and unsetenv() are required by
the POSIX_SINGLE_PROCESS Option Group as detailed in
Section E.1 of IEEE-1003.1-2017.
The POSIX_SINGLE_PROCESS Option Group is required for PSE51,
PSE52, PSE53, and PSE54 conformance, and is otherwise mandatory
for any POSIX conforming system as per Section A.2.1.3 of
IEEE-1003-1.2017.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Update Zephyr fork of MCUboot to revision:
8b4c70ab6dc03d2826c166dedb56541950defa8c
Brings following Zephyr relevant fixes:
8b4c70ab boot: zephyr: Update changed Nordic family Kconfig
b794d335 espressif: modify SOC_FAMILY according to new HWMv2
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The sample assumed that the broadcast audio was always a single
frame per block. This commit improves the validation of the
codec configuration from the broadcast source, and properly
decodes the SDU using the configuration values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
HAL_OSPI_AutoPolling is checking is the status match
happened in a busy loop. That CPU intensive operation
can cause starvation of other tasks especially on flash
erase operations which can take seconds to complete.
So, replace the use of HAL_OSPI_AutoPolling with
HAL_OSPI_AutoPolling_IT. The match results
HAL_OSPI_StatusMatchCallback being called.
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
Since a DMA cell now allows specifying a channel and a MUX value
there's no need to fetch these values from the HAL. This, in turn,
allows for more flexibility and reduces the coding effort for new
platforms that want to use the SAI driver.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add support for status and online notification properties.
Fire these notifications from int_routine_handler work directly.
Such approach makes the code cleaner and does not affect overall
max20335 interrupt processing performance. However application code
processing these notifications cannot be blocking.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Some applications might be intersted in notification about charger
status or charger online updates so they can avoid polling.
Add new properties allowing to register such notifications.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Instead of using CONFIG_MMU_PAGE_SIZE for size of the privileged
stack, use the actual kconfig CONFIG_PRIVILEGED_STACK_SIZE.
This allows for changing the size of privileged stack, and
also aligns to the usage of CONFIG_PRIVILEGED_STACK_SIZE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of using CONFIG_MMU_PAGE_SIZE for size of the privileged
stack, use the actual kconfig CONFIG_PRIVILEGED_STACK_SIZE.
This allows for changing the size of privileged stack, and
also aligns to the usage of CONFIG_PRIVILEGED_STACK_SIZE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add build_only for the st,stm32-ethernet driver to the build_all
ethernet tests and add an entry for ethernet support to make sure
ethernet driver is built.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
An overflow compiler warning is generated when building for native_sim_64,
add an explicit cast to fix -Werror builds.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Use the native_sim board to build ethernet drivers for spi devices and
add an entry for the default testcase.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The MRAM has no concept of erase blocks or pages, so this is treated as
driver configuration.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
A few paths used only when there is Coded Phy support were
still setting the subscribe registers directly.
Let's use the nRFx HAL for this so it works properly also
in simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Quite a few paths used only when there is Coded Phy
support were still setting the PPI directly.
Let's use the nRFx HAL for this so it works properly also
in simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This will help to detect any issues with duplicate handlers, currently,
it causes an infinite loop in the handler that processes the single
linked list.
Also, increase the stack size to pass the synchronous test case.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case the same callback handler is added to the list twice, this can
result in a loop.
Fixes: #69825.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The code `SYS_SLIST_FOR_EACH_CONTAINER_SAFE` just for remove work
from `pending_cancels`.
After removing work successfully, the function can return early.
It is unnecessary to iterate continuously.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
In iperf2, for multicast data, if it is a client, it will not wait for
the server's AckFIN packet. Because the iperf2 server will not send an
AckFIN packet.
So in zperf_upload_fin(), an error will occur when the zperf client
waits for the server's AckFIN packet.
Multicast only send the negative sequence number packet and doesn't
wait for a server ack can fix this issue.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
Set the minimal RAM requirement for the test variant, so that it does
not get built for platforms it won't fit anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow not specifying the chat_filter parameter in a device
definition, which is equivalent to setting it to "".
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Building with GCC 9.4.0 gives the following warning/error:
error: closest_mv may be used uninitialized in this function
This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Enabled the PIT and Multi channel support
for some of the rtXXXX devices.
- rt1010
- rt1060
- rt1160
- rt1170
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Updating the nxp,pit driver to support mutliple
channels. Updating the dts and board overlays
to account for the changes.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Replaces the use of z_pend_curr_irqlock() with z_pend_curr()
as the former is not used anywhere else anymore.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
During manual testing with UBSAN enabled, it was found that
bt_le_per_adv_sync_cb synced() callback in application
sometimes gets unexpected different values in
`sync_info.recv_enabled` field.
The UBSAN output contained the following warnings message:
runtime error:
load of value 65, which is not a valid value for type '_Bool'
It tunrned out that struct bt_le_per_adv_sync_synced_info sync_info
inside bt_hci_le_past_received_common() contains uninitialized
recv_enabled member.
Set it to true by default to avoid possible issues.
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
The current version is generating a deprecation warning:
Node.js 16 actions are deprecated. Please update the following actions
to use Node.js 20: actions/setup-python@v4.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update all usages of the MBOX API to the latest API changes (to be
squashed for bisectability).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This patch refactors the MBOX API, so that it aligns with some common
Zephyr principles, main changes include:
- There is now a non-DT specific API that takes a regular struct device
and a channel identifier, instead of a struct that contains both. This
API should be used for cases where DT is not an option.
- There is a "dt-spec" variant of the API, meant to be used from
devicetree specifications.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix a few Doxygen issues, e.g.
- References to structs
- Incorrect usage of `@a`, `@p`
- Unnecessary usages of `@typedef`
- Incorrect usages of `@retval`
- etc.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add a new binding that should help with samples or MBOX tests by getting
information from DT.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
