The `net_if` layer should not be forcing `NET_IF_LOWER_UP` to be set on
all interfaces at runtime. Because `net_init` runs relatively late by
default, this is overriding any control the driver itself may have
performed using `net_if_carrier_on/off`.
Initialise this bit at compile-time instead. As the structure is already
being initialised, this doesn't increase any footprints.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add Nuvoton numaker series UART support, including interrupt-driven,
also apply pinctrl and clock-control.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Add Nuvoton numaker series clock controller support, including:
1. Do system clock initialization in z_arm_platform_init().
2. Support peripheral clock control API equivalent to BSP
CLK_EnableModuleClock()/CLK_SetModuleClock().
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
When writing string data to resources which are string types,
we should count in the terminating character into the data length.
Corner cases exist where LwM2M resource type is opaque but
lwm2m_get_string() or lwm2m_set_string() are used to read/write
the data. We must ensure string termination on those case, but
terminating character must not be stored in the engine buffer
or counted in the data length as this might be considered
as part of the binary data.
Fixes#59196
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The loop was supposed to set the alert level to the highest
value by any device. The loop, however, only made sense if
CONFIG_BT_MAX_CONN > 1.
It has been modified to start from [0] instead of [1] and
the initial condition was modified.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
CPUNET uses a diffetent DTS file and the edge connector entry was
missed, this causes build issue for CPUNET.
Fixes 017ff78466("boards: thingy53: Update DTS files to support
expansion boards").
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add a new Kconfig parameter NET_CONFIG_MY_VLAN_ID as initial network
configuration to enable users to set VLAN identifier at startup.
Add a new setup_vlan(...) function to setup the VLAN identifier in
the device, the call have an effect only when NET_CONFIG_MY_VLAN_ID
is above zero.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Currently NET_ETH_MAX_HDR_SIZE is computed as the size of the
structure struct net_eth_hdr, but this does not take into account
the additional 4 bytes on the ethernet frame header in the presence
of VLAN, fix the issue using the size of struct net_eth_vlan_hdr
when CONFIG_NET_VLAN is enabled.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Device dependencies are not always required, so make them optional via
CONFIG_DEVICE_DEPS. When enabled, the gen_device_deps script will run so
that dependencies are collected and part of the final image. Related
APIs will be also made available. Since device dependencies are used in
just a few places (power domains), disable the feature by default. When
not enabled, a second linking pass will not be required.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
zephyr_pre1 target may not always exists, e.g. if second linking pass is
not needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The option can now be set by projects. This change will also allow to
make it dependent on a future CONFIG_DEVICE_DEPS option.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the Kconfig option to be in line with recent renamings in device
handles/dependencies.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the device dependencies array variable to use the "deps" name, in
line with latest renamings in device.h
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename struct device `handles` member to `deps`, in line with previous
renamings in the device API.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename multiple internal device macros to use the DEVICE_DEPS naming, so
that it is clear they belong to the device dependencies APIs.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
These macros are used internally by the device dependencies functions.
There's no need to expose them publicly, so prefix them with Z_ and add
them under INTERNAL_HIDDEN docs section.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the "device_deps" naming scheme to emphasize we are storing device
dependencies. The fact we are using device handles to store them is an
implementation detail.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the gen_handles script and all of its references/associated files
to gen_device_deps. The new new makes things more clear, because the
script just take care of generating, for each device, an array of device
dependencies. While device handles are used internally to store this
information, it is in reality an implementation detail.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for communication with serial ports on native POSIX platform
via UART driver API. Serial port driver supports polling API,
configuration of the serial ports used via devicetree and command line
options, and runtime configuration with `uart_configure`.
Multiple instances of the driver are supported.
Example use and configuration is also demonstrated in the
`samples/drivers/uart/native_tty` sample.
Closes: #56586
Signed-off-by: Marko Sagadin <marko.sagadin42@gmail.com>
This moves CONFIG_MAX_THREAD_BYTES from the board's defconfig
file into the Kconfig file. This is to get rid of the cmake
warning about CONFIG_MAX_THREAD_BYTES being assigned value
but got the value ''. This is due to CONFIG_USERSPACE being
disabled, where some tests explicitly do so. This is simply
done to avoid confusion when running those tests manually.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add DeviceAbstract class to default imports from pytest-twister-harness
package to simplify importing DUT package, when creating tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Added a new function to check whether a clock source is supported by a
platform and to retrieve its frequency.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
The word cpu was added to the names of functions, structs, types
and definitions to disambiguate the names and make room in the namespace
for soc clock control functions.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Moved dmic register definitions to a separate file dmic_regs.h and added
their description. Platform-dependent registers definitions are placed in
separate files. Used standard macros FIELD_PREP, FIELD_GET in operations on
registers.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Note that only the the hardware round robin port arbitration capability
is being used.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Basic support of VC capability, where a driver can enable VC and map its
traffic classes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The initial implementation was broken during improvements.
There was incorrect assumption that all pages are unmapped at
initials state. In reality at the beginning whole memory is
powered on, so we should mark all pages as mapped. Later in
initialization code unused pages are unmapped and if after this
some banks become empty (all pages unmapped), the power is
switched off.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
When PDF build fails, we want to see what cmaused the failure, so upload
the log for later analysis.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the embedded application has a main(),
Zephyr requires it to have a signature with
C linkage (no C++ name mangling).
Otherwise Zephyr's init will not call it,
but will call the default weak stub.
But, when building with clang/llvm, when we
build calling the compiler with --frestanding
(for ex if CONFIG_MINIMAL_LIBC is set), the
compiler will mangle the main() symbol name.
This is not incorrect behavior from the compiler,
as, in principle, in a freestanding environment
main() does not have a special meaning.
gcc is still not mangling it when called with
--frestanding.
To avoid this issue, we define explicitly
the main linkage as extern C,
in a header the application will always include.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The code_relocation feature creates generic section names that sometimes
conflict with already existing names.
This patch adds a '_reloc_' word to the created names to reduce the risk
of conflict.
This solves #54785.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
Update driver with low level power control and OpMode
functions to better represent operations used in power
mode transition diagram Figure 2 from the datasheet.
This also prepares the driver for use of these functions
for PM actions.
Extend the soft reset at initialisation to a full POR.
Add defines for maximum POR time and start up time.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
