Commit slters z_impl_nrf_qspi_nor_xip_enable to not call
qspi_device_init in case when xip_enabled has the same value
as requested.
In case when qspi_device_init returns non-zero no further actions
are taken and xip_enabled will not be to set requested value.
Fixes#59535.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now that all in-tree phys are declared under their mdio bus, drop the
`mdio` property and use DT_INST_BUS to find the bus.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The change is to update the location of the NXP HAL license file (BSD-3)
to the root of the NXP HAL repo.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
This reverts commit d24880e358.
The issue was fixed by a2d29025038dece141ab71545c83166384821369.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
`k_thread_create` function has the 'adin' device passed as 1st
entry pointer. Therefore the device configuration is obtained directly
from the `dev` structure.
Adujst the code accodringly.
Fixes: 75dde83 ("drivers: ethernet: adin2111: add adin1110 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
This updates the testcase.yaml to include new configurations for
LeAudio, Mesh and native builds.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Both options are kind of mutually exclusive and can't be used together.
Also, USE_IDENTITY is used for debug purpose and could be useful when
debugging Private Proxy as well. Since CONFIG_BT_MESH_DEBUG_USE_ID_ADDR
is not allowed to be used in production, it is fine to use it for
Private Proxy advertisements as well.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
`DEVICE_DT_INST_DEFINE` requires to pass pointer to the device's
private constant data so make it const.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Extend zephyr_file(CONF_FILES <paths>) to take a list of paths to lookup
instead of a single path.
This remove the need of callers to do:
> foreach(p ${paths})
> zephyr_file(CONF_FILES ${p})
> ...
> endforeach()
and instead allow them to just pass the list directly to
> zephyr_file(CONF_FILES ${paths})
In addition the help text is updated with the detail that CONF_FILES can
be given an empty list. This has always been possible, but not
described.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Merge both Renesas R-Car platforms
Add Mykola to collaborators
Remove Pierre from collaborators
Update CODEOWNERS file for all renesas r-car related files
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
To better delimit renesas ranges dts, we need to use ranges folder.
It will also help maintainers to better delimit their files to
be notified about.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Delete arm64_dcache_all function, because it is unused and in order to
avoid future usage of set/way cache maintenance instructions. It isn't
safe to use them.
Set/way operations are not guaranteed to affect all caches prior to the
PoC, and may require other IMPLEMENTATION DEFINED maintenance.
Exposing set/way cache maintenance to virtual machines is unsafe, not
least because the instructions are not permission-checked, but also
because they are not broadcast between CPUs.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Architecturally, Set/Way operations are not guaranteed to affect all
caches prior to the PoC, and may require other IMPLEMENTATION DEFINED
maintenance (e.g. MMIO control of system-level caches).
First of all this patch was designed for Xen domain Zephyr build, set/way
ops are not easily virtualized by Xen. S/W emulation is disabled, because
IP-MMU is active for Dom0. IP-MMU is a IO-MMU made by Renesas, as any good
IO-MMU, it shares page-tables with CPU. Trying to emulate S/W with IP-MMU
active will lead to IO-MMU faults. So if we build Zephyr as a Xen Initial
domain, it won't work with cache management support enabled.
Exposing set/way cache maintenance to a virtual machine is unsafe, not
least because the instructions are not permission-checked, but also
because they are not broadcast between CPUs.
In this commit, VA data invalidate invoked after every mapping instead of
using set/way instructions on init MMU. So, it was easy to delete
sys_cache_data_invd_all from enable MMU function, becase every adding of
a new memory region to xclat tabes will cause invalidating of this memory
and in this way we sure that there are not any stale data inside.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Commit adds configuration for mesh with mbedtls PSA
to CI BabbleSim tests as well as emulation of
the Internal Trustable Storage(ITS) based on Zephyr's
settings to run in parallel environment.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Updated the sample to check for lines from the tracing user
implementation to make sure that the glue works.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Let's just let the user implementation to its things, like
checking, locking and stuff.
The tracing_user.c now just acts as a glue.
Moved previous implementation to its sample, and cleaned up
headers.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The configuration option was deprecated and removed as the default in
MCUBoot commit 9315654d7951fb2c269251db94e04cd062d0b89a.
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com>
When dealing with multiple connections in the shell as the central,
it is more often than not the newest connection you want
to interact with.
The behavior for the peripheral remains unchanged.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The streams can be deallocated once bt_bap_stream_ops.released callback
is called. Otherwise it may cause memory violation in the stack.
Fixes: ASCS/SR/ACP/BV-31-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Since VWGPSM (Virtual Wire GPIO Target-to-Controller) registers are
introduced in npcx9 and later series, the CL moves the related DT nodes
from npcx-espi-vws-map.dtsi (Used for all npcx series) to the specific
dtsi files for npcx9 and npcx4 series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This is a follow-up to commit fa609e5844.
This driver implements SPI slave operations only and cannot be used
without the corresponding Kconfig option enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Instead of printk. This change aligns the sample a bit more to the
canonical "hello world" sample in C. Also, samples should in general be
as portable as possible.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Overall, this makes the sample code much simpler and smaller.
Whit the changes introduced in commit commit 57e0da4d80
("boards: add zephyr,code properties to the various gpio-keys nodes")'
this example will work out of the box with any board that has at least
zephyr,code = <INPUT_KEY_0>; in its devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fixes#56200
Add the ZephyrAppConfiguration package and update the corresponding
documentation. This adds flexibility to the CMake build configuration
by providing a workspace configuration package and an application
package, which only applies to the current application. The workspace
package stays the same as before, but the application package is
new and lives, per default, inside the application folder.
Signed-off-by: Nico Lüthi <nylnx@outlook.com>
To allow the ADC API unit test to skip tests for non-implemented
features, return -ENOTSUP.
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
If the driver does not implement an optional feature, then skip the test
if -ENOTSUP is returned.
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
The anytree package has introduced a breaking change in version 2.9.0 by
adding a 'size' property to the NodeMixin class. Since the TreeNode class
in size_report derives from NodeMixin and defines an attribute with the
same name, an AttributeError is raised when generating reports.
With this change, the attributes of the TreeNode class are prefixed with
an underscore to resolve the name collision and to prevent future name
collisions.
Fixes#60213.
Signed-off-by: Christian Marx <c.marx@vega.com>
When we lock an hwspinlock, we must write the CPU identifier to
the hwspinlock register. If we want to unlock the locked hwspinlock,
we have to rewrite the same CPU identifier.
To define the CPU identifier, we use affinity 1 and affinity 2 fields
of the MPIDR register.
Signed-off-by: Aziz Idomar <aidomar@sequans.com>
The intention of hardware spinlock is to allow two processors,
that have no alternative mechanism for accomplish synchronization
and mutual exclusion operations, to share resources (such as
memory and/or any other element).
Here, we add the hwspinlock framework, that makes possible to use
those hwspinlock devices and stay platform-independent. Each
platform wishing to support hardware spinlock must describe a
driver using this framework.
Signed-off-by: Aziz Idomar <aidomar@sequans.com>
This is a copy of the TI AM62x SK EVM board file to support the
M4F on the phyBOARD-Lyra AM62x, which is PHYTEC's development kit
for the phyCORE-AM62x SoM.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Force all AM6-based boards to start with 'am6' which allows to
place all boards for the same SoC next to each other. The 'ti_'
prefix would end in spreading boards all over the board directory.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
