Use `kernel log-level modulename severity`
Also enable it for the Bluetooth Shell.
Then one can compile-in a lot of BT modules like so:
CONFIG_BT_DEBUG_HCI_CORE=y
CONFIG_BT_DEBUG_L2CAP=y
CONFIG_BT_DEBUG_ATT=y
CONFIG_BT_DEBUG_GATT=y
And at runtime select only, e.g. GATT
kernel log-level bt_hci_core 0
kernel log-level bt_l2cap 0
kernel log-level bt_att 0
And then re-enable L2CAP if needed later
kernel log-level bt_l2cap 4
And so on..
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add commands to connect to an l2cap channel using Enhanced Credit-based
Flow Control, and to reconfigure it.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When invoked without parameters, `bt connect` will now attempt to connect
to the last scanned device. Used in conjunction with the RSSI filter, this
makes the connection process somewhat scriptable.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This adds an RSSI cutoff, so any scanned devices that are below the given
value (in dB) will not get printed out. Very useful in noisy environments.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
While build of samples or applications which does not contain
MCUBOOT_IMG_MANAGER option enabled, following warning occures:
warning: IMG_BLOCK_BUF_SIZE was assigned the value 256 but got
the value ``.
Because of that it decided to move IMG_BLOCK_BUF_SIZE config to
Kconfig.defconfig with additional condition if MCUBOOT_IMG_MANAGER
Signed-off-by: Alexandr Kolosov <rikorsev@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add a simple test to ensure that we can create and join a
single thread `CONFIG_MAX_PTHREAD_COUNT` * 2 times. If
there are leaks, then `pthread_create()` should
eventually return `EAGAIN`. If there are no leaks, then
the test should pass.
Fixes#47609
Signed-off-by: Christopher Friedt <cfriedt@fb.com>
If a thread is joined using `pthread_join()`, then the
internal state would be set to `PTHREAD_EXITED`.
Previously, `pthread_create()` would only consider pthreads
with internal state `PTHREAD_TERMINATED` as candidates for new
threads. However, that causes a descriptor leak.
We should be able to reuse a single thread an infinite number
of times.
Here, we also consider threads with internal state
`PTHREAD_EXITED` as candiates in `pthread_create()`.
Fixes#47609
Signed-off-by: Christopher Friedt <cfriedt@fb.com>
Add two MEDIA_PROXY group type defines corresponding to the MCS ones.
Update the mpl.c to use the newly added names.
The purpose of the exercise is to get a complete set of MEDIA_PROXY
defines, so that the media player can be made fully independent
(define-wise) of the MCS.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the media player to use the MEDIA_PROXY_* defines rather than the
BT_MCS defines. The media player should not know about the MCS (media
control service).
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the media_proxy header file (documentation) to use the defines it
provides itself, rather than the corresponding ones from the mcs.h.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The bus_label field of the struct was not used, so remove it. This
lets us remove one of the last users of DT_INST_BUS_LABEL.
Signed-off-by: Kumar Gala <galak@kernel.org>
Check that the device we are trying to use has successfully powered up
when it is on a power domain. If it has not, release the request for the
power domain to be powered to ensure we do not have dangling requests.
As a result of this, `PM_DEVICE_ACTION_RESUME` will not be run on a
device if `PM_DEVICE_ACTION_TURN_ON` has already failed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Store errors powering up devices in a flag in the PM struct. This is
required as the `pm->state` variable always transitions to
`PM_DEVICE_STATE_SUSPENDED`, even when `PM_DEVICE_ACTION_TURN_ON`
returns an error. Marking the transition as failed will allow the
transition logic in `pm_device_runtime_get` to detect the problem.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
