To avoid compilation issues when including tbs.h header file when
CONFIG_BT_TBS_MAX_URI_LENGTH is not set, just pass the URI pointer
instead of an array in bt_tbs_client_call structure.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Don't setup CONFIG_ARC_HAS_ACCL_REGS option for board explicitly
if we use it default value.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
In case of ARCv3 64 bit we have only one 64bit accumulator
register instead of register pair, so fixup register
save & restore code.
While we at it also make ARC_HAS_ACCL_REGS option (which
controls accumulator reg/regs save & restore) default
for HS5x and HS6x as well - as it should be.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Update nsim / mdb options of nsim_hs6x and nsim_hs6x_smp
to be closer to default hs68 templates.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Update the documentation on the files in the two zephyr cmake packages
we have in tree to remove references to obsolete files, and add
references to missing files.
Fixes: #48047
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Dai index should be added to config as it can be queried by the
application like sof. Also check for dynamically allocated params
when returning the config.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Setting CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT here is unnecessary
as the value needed is equal to the default.
Signed-off-by: Adam Zelik <adam.zelik@nordicsemi.no>
Increase the default user-allocable number of RTC channels to meet
the nrf_802154 driver requirements.
Signed-off-by: Adam Zelik <adam.zelik@nordicsemi.no>
The bbc_microbit boards end up enabling CONFIG_SENSOR because of
CLOCK_CONTROL_NRF_USES_TEMP_SENSOR. This ends up enabling the I2C
bus which causes CONFIG_I2C_TEST=y. We end up with a build conflict
betwee the i2c_test.c driver and the test case code. So the easiest
solution is to just exclude the platforms from this test.
Signed-off-by: Kumar Gala <galak@kernel.org>
Beacon test had trick for extended advertiser. That has been added as
conditional compilation. Additionally, waiting beacon procedure
waits for 1 more second to avoid boundary case since
the extended advertiser is more precisionive.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Extended advertiser has better latency without any delays than legacy one.
If couple of config model commands start sequently then
the first ones are received normally but the next one are transmitted in
parallel with leftover communication (retransmissions) of the previous one.
That causes collisions and broken test despite the functionality itself
is ok. Adding delays between commands solves crossovering tx time.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
If LPN loses Subscription List Add Confirmation it repeats
Subscription List Add frame. Friend doesn't check both
transaction number and presence addresses in the list.
That causes situation when Friend fills the same address
full list.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
With extended advertiser a precision of transmission becomes high.
The first frame is emitted quite quickly. The scanner latency
config option to enable scanner a bit in advance is not sufficient.
Sometimes replays on Friend Poll are lost.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
mesh extended advertiser is not well tested. As the first step
the mesh babblesim tests should pass on extended advertiser as well
as on legacy advertiser. Minor fix to avoid lpn collisions in
friendship tests with multi lpns.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The function will be used to update the RSI value. The returned value
can be later used in advertisement data for set identification. This
removes the need of specific bt_csis_advertise function so that the user
can call the API to generate new RSI once needed (e.g. on RPA change).
This allows the user to manage the advertisement data to fit it's needs.
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Disabled (0x00)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 33
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x1d
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Unknown EIR field 0x2e: 16e61d64dc45
Name (complete): audio test shell
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
Advertising handle: 0x00
Advertising random address: 4E:21:29:F8:94:93 (Resolvable)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Enabled (0x01)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes compilation error that happen when including audio.h
without CONFIG_BT_AUDIO configuration enabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When sending an ATT packet, do not just try to send the first packet in
the queue, but find the first one that can be sent using the channel.
This makes sure that eg. packets that shall be sent on an unenhanced ATT
channel are not blocked by packets that shall be sent on enhanced ATT
channels.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
bt_eatt_connect was documented to return -EINVAL if conn is NULL, but
this was not the case. Instead it lead to undefined behavior.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
A field was added to the `bt_gatt_<operation>_params` structs when
`CONFIG_BT_EATT` is enabled. This changes the experimental API for EATT.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Disallow trying to send requests or notifications on only EATT channels
if no EATT channels are connected or the link is not encrypted. In these
cases the operation will always fail, so it should not be queued.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
A channel option field has been added to the bt_gatt_*_params structs.
This allows the application to choose wether Unenhanced ATT, Enhanced
ATT, or Any ATT channel shall be used for the
request/command/indication/notification.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Initialize monitor UART device at compile time so that device pointer
can be constified.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Initialize devices at compile time. Also fix some ready check problems
(e.g. in async test readiness failure just resulted in a printk, but
test continued...).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
