This update introduces some fixes required to build with Zephyr 3.1
and the associated Zephyr SDK update.
It also enables running the zscilib test suite as part of the normal
CI build process, referencing the 'tests' folder in `module.yml`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
After magic is read during bound procedure, trigger an
initial data read. This is to ensure data is not missed
when piggybacked on magic's exchange interrupt.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
Add bsim tests to check tx callback behavior for advertiser.
Feature coverage:
TX Complete callback execution
Callback order
Packets are freed before the end callback is called
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The peripheral_hids sample currently implements the HID descriptor and
characteristics, but no notify report. Add some code for implementing a
simple one button click report for boards that have sw0 defined, so that
the sample actually does something beside connecting and enumerating the
device.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The default report_map for peripheral_hids mouse sample descriptor is
missing a report id field. This seems to be confusing Android hosts into
somehow parsing reports incorrectly.
Adding a report id seems to fix the problem and still works correctly on
bluez hosts.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The return values of esp_wifi_set_mode(), and esp_wifi_set_config() were
overwritten once esp_wifi_start() is executed.
This commit fixes that by ORing the return value to the others.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
PR #49550 missed adding proper RTCIO pin mapping
in a few rtcio functions calls, which causes board
to crash. This fixes it.
Closes#50238
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
GCC doesn't actually need this treatment, only clang. (GCC is smart
enough to use "const" as the needed clue to suppress instrumentation
it seems like). And it turns out older gcc's emit a warning
(attribute ignored, which is... sort of weird to warn about?) in that
circumstance, which breaks builds. Just turn it off rather than try
to find a way to suppress that one warning.
Signed-off-by: Andy Ross <andyross@google.com>
It turns out that SOF is already using a symbol named
"zephyr_app_main()", so this produces a collision. Pick something
that looks more relevant to "posix", and put an underscore on it (it's
a "system" symbol, after all).
Signed-off-by: Andy Ross <andyross@google.com>
It seems like libfuzzer wants to relocate 32 bit instrumented code
sections at runtime at addresses different than the ones in the ELF
file. This is problematic, because Zephyr files are compiled
statically and so will crash the first time they try to jump to an
absolute .text address (basically at the first function call after a
fuzzer entry point).
It seems that building with -fPIC is enough to defeat this (we use the
host linker script, which will manage the GOT/PLT entries for us),
which will work as long as the fuzzer isn't playing games with data
other than text. None of this seems to be documented, so... I guess
it's as good as we can get. It works, at least.
(x86_64 binaries don't show the same behavior, they run where they
were linked)
Signed-off-by: Andy Ross <andyross@google.com>
With the move to start/stop functions the transceiver is not expected
to be enabled after driver initialization.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This overlay shows the LPUART at 9600 with wakeUp capability
to exit the nucleo_wl55jc target plaform from the low Power
stop mode, EXTI_Line 28 is the corresponding wakeUp source.
The LPUART is sourced by the LSE (32768Hz) and max baudrate
is 9600. Set the console to 9600.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The USART or LPUART, especially on stm32wl, must set the EXTI
lines corresponding to the wakeUp source.
This LL_EXTI_LINE_xx is given by the Device Tree property.
This makes the system exiting lowpower stop mode on EXTI irq.
The LL_EXTI_LINE_x is exactly the bit(X) set.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
When the EXTI Line nb is not set as interrupt by default
(at reset value), the uart instance cannot waekup the
system from its low power stop mode.
The EXTI line must be specified, like with stm32WL55
Signed-off-by: Francois Ramu <francois.ramu@st.com>
When necessary, enable QSPI and Modem drivers
by default if relevant higher level kconfigs are used in an app.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Removed duplicated configuration items for CONFIG_ARM64_VA_BITS and
CONFIG_ARM64_PA_BITS, and modify them to be 36bit as SoC supports up
to 34-bit address.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Extracted common function for erase the image trailer which
decrease code size and increase legibility.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Inappropriate page was erased during test as its absolute offset was
calculated with omission of the the fixed-partition offset to which
it belongs.
fixes#48115
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
When CONFIG_ZTEST_SHUFFLE is enabled and ASSERTS are disabled
`start_pos` becomes an unused variable leading to a compile error.
Cleaned-up shuffling algorithm to not need a `start_pos` check.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
Adding guidelines for writing samples which includes definition
and minimum criteria to qualify as a sample.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Fix the issue that the initialization will fail when both
CONFIG_SPI_NOR_SFDP_RUNTIME and CONFIG_SPI_NOR_IDLE_IN_DPD are enabled.
The cause of this problem is simply calling the wrong function.
Fixes#33015
Signed-off-by: Xinyang Tan <xinyang.tan@delve.com>
Allocated, but undersized packets must not just be logged, but also
unreferenced before returning an error.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
If `struct bt_mesh_prov::unprovisioned_beacon` callback is not set,
don't process the beacon.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
zcbor supports native zcbor_size_ functions for some time now,
so there is no need to have local zcbor_size_ definitions.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fixes: #47588
Use `check_set_compiler_property(... "SHELL:-Wformat -W<format-option>")`
to ensure that compiler options requiring `-Wformat` to work properly
are tested with said option.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #47588
Kitware decided to fail compiler tests of single options if the
compiler reported only a warning and not an error:
github.com/Kitware/CMake/commit/f745e0497ee71d35fd1b3524b1636a72da76c266
which affects CMake 3.23.0 and 3.23.1
This change was later reverted in CMake >=3.23.2 and >=3.24.0
github.com/Kitware/CMake/commit/4941887d7defecb3016d2bd94d3a45754251ca56
Although the immediate issue is related to CMake, and has been fixed
reverted in later releases, then it still makes sense to be able to
group compiler options together that generally are depending on each
other to function correctly.
This commit introduces the possibility to group compiler options which
must be tested together.
It uses same approach as
> add_compile_options("SHELL:<option1> <option2> ...")
Usage:
> check_set_compiler_property(PROPERTY <property>
> "SHELL:<option1> <option2> ..."
> )
Will test the option together.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
For the encryption procedure exists a flag used to indicate that the
procedure expects all PDUs to be delivered to the procedure STM.
This flag was not cleared during creation of new procedure. This could
lead to unexpected PDUs being passed to local procedure STM
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix compile error when BT_CTLR_JIT_SCHEDULING is enabled but
BT_CTLR_ADV_EXT is disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Previously, the lora_send() function would have returned zero regardless
of any error encountered while waiting for the transmit to complete.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
