Add shell support for RPA expire callback.
This prints a message when the callback is called on the specific
advertising set.
Add a command to control the return value of this callback for a
specific advertising set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add LSI1 and LSI2 (both present on STM32WB) to the list of possible
source for LSI clock
Solve a regression for RTC counter
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add LSI clock and RTC clock source for Nucleo F103RB, L4A6ZG and
F103 mini to resolve a regression concerning the RTC counter
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
For STM32F1, F4 & L1 series, add the definition of SYSCLK to solve a
regression concerning the RTC counter
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Aside from base properties (maybe for documentation purposes),
`required: false` should not be encouraged.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Add `DevicetreeBindingsCheck` and `required_false_check()`, which
checks to make sure that no new Devicetree bindings add the
redundant `required: false` property.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
DTS property attributes are (by default) not required.
Explicitly specifying `required: false` is redundant.
Perhaps a warning to that effect would be useful.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Fixes the double up test of int_gpio.port.
Addition of VCNL4040_ALS_INT_EN macros.
Use of BIT() macro where it makes sense.
MISRA improvements.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
Saves some flash and we get priority inheritance.
Also removes lock from vcnl4040_handle_int() as it
is always called from the same thread.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
The driver has a read register, modify value, write value flow due to
needing to modify nibbles of registers at different times. The issue
this driver previously had was new incoming configurations from the
driver would be corrupted by previous configurations written into the
vcnl4040 (when there's been no power off). This would be in the case
when a device continuously power on and a developer is tweaking the
vcnl4040's configuration or when deploying firmware updates with
a new vcnl4040 configuration.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
The driver was using the i2c_transfer_dt() API incorrectly by not using the
I2C_MSG_STOP flag in the flags field.
The I2C write function can be written more simply with the basic I2C write
API so this commit also switches the code to the basic I2C write API to fix
this bug.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
Add a test that validates fetching every property from the sbs gauge driver
results in no driver error codes being returned.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Add a sample sbs gauge driver with feature parity and basic tests
comparison to its sensor counter-part. Includes a simple stub test that is
extended upon.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Both `drivers/flash/flash_shell.c` and
`samples/drivers/flash_shell/src/main.c` provide a flash shell
utility called `flash`.
Rename the latter to disambiguate.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
CONFIG_NET_BUF_VARIABLE_DATA_SIZE option had not test coverage at all,
making in vulnerable for regressions. There is no dedicated test suite
to verify this option, but at least we can enable it in a few test
suites to make sure the configuration is functional.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Document the stable API change in the net_pkt API along with the
expected action from the existing applications.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.
In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.
Update the existing codebase to provide the expected fragment length,
based on the context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The "net mem" command handler did not take the variable buffer length
configuration, and failed to build in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case variable buffer length feature was enabled, net_pkt code did
not build due to unconditional references to CONFIG_NET_BUF_DATA_SIZE,
which is not avaialable in this configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case variable buffer length feature was enabled, the TCP stack did
not build due to unconditional references to CONFIG_NET_BUF_DATA_SIZE,
which is not avaialable in this configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case Echo Request did not carry timestamp (i. e. requested payload
size was smaller than 4), there won't be a timestamp in the reply
either. Such replies should not be ignored. Instead, simply skip the
turnround time calculation if timestamp is missing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add -s parameter to the net ping command, allowing to specify the
payload size for the Echo Request.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Let net_icmpv4_send_echo_request() and net_icmpv6_send_echo_request()
autogenerate Echo Request payload, in case data length is specified but
no data pointer provided. The autogenerated payload includes timestamp
(if payload size permits) so that the turnround time can be calculated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove #ifdefs and use macro Z_TEST_SKIP_IFNDEF(). Makes code cleaner
when removing #ifdefs for the price including little bit more code to
one test.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Keep track of errors which needed if tests are shuffled and API tests
are executed after error injection tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
According to IBECC spec ECC Error log register is only valid when
ECC_ERROR_CERRSTS or ECC_ERROR_MERRSTS bits are set.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
rpi-hal function "uart_set_format" expects data width in the range
of 5..8. So I created a new function “uart_rpi_set_format” which
contains common parts of “uart_rpi_configure”.
Signed-off-by: Jan Hilsdorf <jan.hilsdorf@gmail.com>
Use the latest Ubuntu image. There's no special reason for this change
other than staying up-to-date.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There was a bunch of BDF lookup code in the ivshmem driver originating
from issues with not being able to have multiple PCIE_BDF_NONE entries
in DTS. Now that devices are always looked up based on VID/DID this
should not be an issue, and hence the additional code is not needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a test to ensure that `pthread_cond_t` can be used over
and over again and that there is no resource leakage with proper
usage.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Consistent with the change of `pthread_t` from
`struct posix_thread` to `uint32_t`, we can now also abstract
`pthread_cond_t` as `uint32_t` and separate `struct posix_cond`
as an implementation detail, hidden from POSIX API consumers.
This change deprecates `PTHREAD_COND_DEFINE()` in favour of the
(standardized) `PTHREAD_COND_INITIALIZER`.
This change introduces `CONFIG_MAX_PTHREAD_COND_COUNT`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Previously, `pthread_cond_init()` could not actually fail, and
destroying condition variables was a no-op, and it was missing
in `pthread_exit()`.
However, with the change of `pthread_cond_t` to `uint32_t`, and
since those are embedded inside of `struct posix_thread` for the
time being, the pthread code needs to keep track that it is
relinquishes used condition variables when a thread completes.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Previously `PTHREAD_MUTEX_MASK_INIT` was used to mark a
`pthread_mutex_t` as initialized.
The same needs to be done for `pthread_cond_t` and likely others.
Rather than copy-pasting that and a number of inlines that
duplicate the same functionality, simply make it more generic.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
TLB driver knows the required number of bytes for HPSRAM
storage during power off state.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Context save is saving whole memory to persistent
memory area, than turning off memory and CPU
Context restore is a modified boot flow, where
the previously saved context is restored
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
