Fixed broken MCUmgr client unit test.
Added test_ -prefix to tests.
Added testcase.yaml to test trigger test run.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When publish buffer run out, no thread active process work.
Fix this, by reschedule process work.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Current MQTT-SN topic and publish allocators are not thread safe.
Fix this, by using k_mem_slab instead of arrays.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
GCC format-truncation kicks in on this printk whenever the logging
configuration transforms the LOG_WRN below into a noop, and the snprintk
return argument become unused.
Fix that by switching to strncpy, fixes:
zephyrproject/zephyr/drivers/modem/hl7800.c:1786:74: warning: '%s'
directive output may be truncated writing up to 53 bytes into a region
of size 21 [-Wformat-truncation=]
reproduced with:
west build -p -b mg100 -T samples/net/telnet/sample.net.telnet
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Remove dead and erroneous (DUT is not a dict) if branch. Simply use the
self.options.platform list. Which is filled by either the hardware map
or the '--platform' option.
This change addresses issue #62723 and #62560.
Signed-off-by: Manoel Brunnen <manoel.brunnen@ithinx.io>
Before only with --integration such skips were changed to errors.
This hinders issues when twister is call with --all flag in CI
and new skips on integration platforms are not caught. Then those
skips cause errors in other PRs when --integration was used.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The value of emulation_platforms is a bool corresponding to
--emulation-only CLI option. Therefore, it should be registered
as Filters.CMD_LINE. Without it, twister raises errors when an
integration platform is descoped due to this option.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Mark documents, which are included in other documents as :orphan:
following existing samples in Zephyr tree.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the defined(__DOXYGEN__) more specifically in the header to better
match i2c.h and make things more explicit. Removes the define being
setup in zephyr.doxyfile.in.
Fixes some of the deprecation notes and what to look for instead. Fixes
some typos.
The async, signal, and rtio APIs for SPI are now shown in the built docs
as would be expected.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The docs should be viewable if doxygen is being run, and that
requires checking for the __DOXYGEN__ define. This should fix
the missing I2C callback, k_poll_signal, and rtio API sections
not being shown in the built documentation.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This commit:
* adds the `CONFIG_SOC_GECKO_SERIES0` Kconfig option for Gecko Series 0
SoCs
* selects the proper `CONFIG_SOC_GECKO_SERIESx` option where it's currently
missing
Fixes#62806.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Support logging for all POSIX pooled resource types such as
pthread_t, pthread_mutex_t, and pthread_cond_t.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Releasing the lock before notifying condvar led to a race condition
between a thread calling k_condvar_wait to wait for a condition variable
and another thread signalling for this same condition variable. This
resulted in the waiting thread to stay pending and the handle to it
getting removed from the notifyq, meaning it couldn't get woken up
again.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The signal_poll_event function was previously called without the poll
lock held. This created a race condition between a thread calling k_poll
to wait for an event and another thread signalling for this same event.
This resulted in the waiting thread to stay pending and the handle to it
getting removed from the notifyq, meaning it couldn't get woken up
again.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Removes the pseudo device prerequisite that the LVGL setup routine has been
executed before initialization. The pseudo devices are now registered at
the end of the LVGL setup routine, the driver is not concerned with
configuring the devices anymore. This also removes the need for enforcing
certain priorities within the same init level.
This resolves issue #62753.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
When a packet can't be cloned we crash as we try to initialize the
cursor on a nullptr. We should check if we have a valid pointer,
and if we don't we drop the packet along with a warning.
Signed-off-by: Andreas Ålgård <aal@ixys.no>
In low memory conditions, its possible for socketpair memory allocation
to fail and then the socketpair is freed but after that the remote
semaphore is released causing a crash.
Fix this by freeing the socketpair after releasing the semaphore. Add a
test case to induce low memory conditions (low HEAP and high socketpair
buffer size), with the fix issue is not seen.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The gecko UART driver needs pinctrl support for SOC_GECKO_SERIES1
devices, this has been added to jg and pg 12b series in 40fa96506b but
is missing in others, causing some build failurse.
Add the device nodes for the gg11b and gg12b files since they contain
gecko-uart references and seems to be under the SERIES1 define.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit adds Kconfig variables to configure ADLTC2990. This commit adds
basic driver code for analog devices ltc2990 sensor.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
Rework RAM disk driver to be configured using devicetree and
support multiple instances.
This patch also removes a copy of the RAM disk driver,
tests/subsys/fs/fat_fs_dual_drive/src/disk_access_test_drv.c,
that was there for testing multiple disk drivers support.
Bonus: one SYS_INIT() less and a memory region can be exported to the
host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If the network interface naming is enabled, then use the
interface name length (CONFIG_NET_INTERFACE_NAME_LEN) for
IFNAMSIZ instead of device name length.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add input codes to the gpio-keys devices, this makes the board build
correctly with the input samples, that are currently failing to build in
CI.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Added an exception to scl.py module, to not process an empty
yaml file, because of error from pykwalify. New exception
is handled when processing quarantine files, to allow
an empty file.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit removes const declarations for members
inside structures used for chat scripts to allow for
modifying them at runtime.
Macros like MODEM_CHAT_SCRIPT_DEFINE() cover the
whole struct when declaring them const, ensuring
they remain placed in ROM.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit optimizes the performance of the script chats by
storing the size of requests with the chat script chat, negating
the need to use strlen() within the modem_chat module every time
a chat script chat request is sent.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit updates the modem_cellular driver to use the
new naming scheme for the modem_chat functions.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds one new feature, modem_chat_run_script(),
which synchronously runs a script.
The existing function modem_chat_script_run() is async,
and doesn't follow the naming convention created for the
other modem modules, specifically, all functions are sync,
unless appended with _async.
To preserve backwards compatibility, the existing function
modem_chat_script_run() will remain until deprecated. It
simply calls modem_chat_run_script_async().
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Included kconfigs to set the ISO-AL logging level and control debug
logging verbosity in ISO-AL unit tests.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Updated unit tests to match changes in ISO-AL that disregard the length
of a received PDU with errors.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Intent is to pass Ellisys ISOAL quality tests for framed TX scenarios
where the TX SDU includes a time stamp that is not based on the
controller's clock.
Changes:
-- Include controller's reception time as a separate field in the TX SDU
information
-- Include decision on whether SDU time stamp is valid and based on the
controller's clock
-- Arbitrate and select / compute time stamp for the SDU
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
