Currently, in tcp_received function defined in zperf_tcp_receiver
module, the assignment of session->state to STATE_COMPLETED is
overwritten on the same path to STATE_NULL and a session is
considered free for both STATE_COMPLETED and STATE_NULL, so remove
the assignment to STATE_NULL.
Remove the break from the STATE_COMPLETED case handling so that it
can fallthrough, in case the same session is used after finish.
Remove also the STATE_LAST_PACKET_RECEIVED case because this state
is never reached.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
The modules zperf_udp_receiver and zperf_tcp_receiver use two
different functions to get a zperf session to store the
statistics, there is a TODO comment in the zperf_session module
suggesting to unify that part.
So delete the get_tcp_session function and use get_session for
both TCP and UDP receiver module.
Delete sock field from struct session because it's not used
anymore.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Currently the maximum number of zperf sessions handled is hardcoded
to 4, create a Kconfig parameter, with default value 4, to make the
maximum number of sessions configurable.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Fixed th02_channel_get() code to return -ENOTSUP when the channel is not
supported.
Fixes#55160.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Since PINCTRL and pinctrl-0 is now required, there's no point in doing
extra validation at driver level. Modify the macro to just check that
sleep state is present when needed, since it was the only remaining
assertion that was not covered. Renamed the macro to make it more clear
what it does: NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for several esp32s3 support on HAL, such as:
* I2C
* SPI
* Timer
* WDT
* LEDC
* MCPWM
* PCNT
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Removed statement about the QoS having to be symmetrical
for two streams using the same CIS, as that requirement
was recently removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The toolchain support was developed and tested against arm clang
version 6.17. So add a check to ensure we are utilizing 6.17 or
newer.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
`bt_id_create` does not accept public addresses, but the phrasing that
is removed in this change can be interpreted as "replace the public
address with a different public address". This was confusing users, so
it will be removed.
The intended meaning of the original sentence may have been "use the
provided address for BT_ID_DEFAULT, instead of using the public
address". Amending the sentence to something like that was considered.
But, there was no consensus on the usefulness of this addition, so it
was left out for brevity.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
If an event with corrupted length arrives, the extra check makes the
handler return early to avoid reading data out of bounds.
Signed-off-by: Arkadiusz Kozdra <akozdra@antmicro.com>
Fixes a segfault if a discovery event happens while discovery is not
active and the discovery callback is null.
Signed-off-by: Arkadiusz Kozdra <akozdra@antmicro.com>
Fix spiram WP_SD3 pin reference as that should be checked from efuse
values in case no customized number is set.
Fixes#54005
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update ESP32-C3 architecture as IMC instead IMA.
Although not documented, ESP32-S3 supports CSR instructions.
It also needs to be enabled, otherwise build will fail.
Fixes#53555
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This change produces more quickly in the stream valid
audio samples. The start fade-in ramp can be shortened to
100 ms for 48 kHz and 200 ms for 16 kHz. It was before 200 ms
and 400 ms. The updated DMIC hardware in allows to do this
change.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Rework the Host Command support. It includes:
-change API to backend
-change a way of defining rx and tx buffers
-fix synchronization between the handler and backend layer
-simplify the HC handler
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Follow naming pattern in the subsystems(logging or shell) and name
the layer between generic handler and peripheral driver "backend".
The name doesn't suit that well to the SHI backend, because there isn't
SHI API itself and the SHI interface is used only for the host
communication. So the backend code includes the peripheral driver itself.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The Host Commands can be used with different transport layers e.g. SHI
or eSPI. The code that provides the peripheral API and allows sending
and receiving Host Commands via different transport layers is not
actually drivers of a peripheral, so move it to the
subsys/mgmt/ec_host_cmd folder.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Check if device runtime is enabled in the beginning of
runtime_suspend to avoid unnecessary checks.
This does not change the current behavior.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Check if device runtime is enabled in the beginning of
pm_device_runtime_get to avoid unnecessary checks.
This does not change the current behavior.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use client context to seperate buffer usage.
Use new `TFTP_EVT_DATA` event to send data to application.
Use new `TFTP_EVT_ERROR` event to report error to application.
Update `tftp_get()` and `tftp_put()` API to use the client context.
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
This adds the runner arguments for dfu-util to the longan_nano board,
to allow flashing via DFU in addition to openocd.
Signed-off-by: Jonas Otto <jonas@jonasotto.com>
For RISCV arch, enable FLASH_SIZE and FLASH_BASE_ADDRESS config.
To avoid duplicated work, remove flash config from RISCV soc.
Signed-off-by: Jonas Otto <jonas@jonasotto.com>
Zephyr supports ADCs with 16-bit resolution, but the ADC sample
displayed readings for such incorrectly due to too-small datatype
This commit fixes the ADC sample for ADCs with 16-bit resolution
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Drop the non existing option PINMUX_XEC, this has been removed in
d76f4f2c8a drivers: pinmux: mchp_xec: drop driver
And is currently causing build errors.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
