Enable DMA driver.
Add the path of the DMA driver header into include paths.
`hardware_claim` is depends by DMA driver, also enable it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Some pico-sdk drivers call a panic function, originally implemented
as part of the Pico's C runtime. This commit adds a Zephyr compatible
implementation of panic, so that those drivers could be compiled with
Zephyr.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Unit test project for bt_dh_key_gen().
This is part of subsys/bluetooth/host/ecc.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Unit test project for bt_pub_key_get().
This is part of subsys/bluetooth/host/ecc.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Unit test project for bt_pub_key_gen().
This is part of subsys/bluetooth/host/ecc.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Unit test project for bt_pub_key_is_debug().
This is part of subsys/bluetooth/host/ecc.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
This update devicetree entries and Kconfig definition to allow use of
reset cause on all SAM series.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add initial version of clock control for Atmel SAM SoC series. This add
support to Power Management which allows control peripherals clock.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add support for BeagleConnect Freedom, a TI CC1352P7 based development
board with enclosure and antenna featuring BLE and SubGHz wireless, 2x
mikroBUS sockets, external flash, light, temperature/humidity sensors,
USB-to-UART bridge, buzzer and battery charger.
See https://beagleconnect.org for details.
Previous closed pull requests:
* https://github.com/zephyrproject-rtos/zephyr/pull/38718
* https://github.com/zephyrproject-rtos/zephyr/pull/36703
Cc: Chris Friedt <chris@friedt.co>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
Signed-off-by: Erik Larson <erik@statropy.com>
Signed-off-by: Yadnik Bendale <yadnik22@gmail.com>
Signed-off-by: Baozhu Zuo <zuobaozhu@gmail.com>
WebP images are smaller for similar resolutions and quality while being
compatible with web browsers and other image processing tools.
For higher resolution images, be sure to limit the display size to make
the rendered pages look reasonable.
This was approved by Benjamin Cabé (@kartben) in this discussion thread:
https://github.com/zephyrproject-rtos/zephyr/pull/55488#issuecomment-1461792751
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Product URL: https://www.ti.com/product/CC1352P7
Datasheet : https://www.ti.com/lit/ds/symlink/cc1352p7.pdf
Features:
Powerful 48-MHz Arm® Cortex®-M4F processor
* 704KB flash program memory
* 256KB of ROM for protocols and library functions
* 8KB of cache SRAM
* 144KB of ultra-low leakage SRAM with parity for
high-reliability operation
* Dual-band Sub-1 GHz and 2.4 GHz operation
Updates:
* Remove CC1352P7_LaunchXL due to compliance checks
* Add CC1352P7 updates
* Update hal_ti for CC1352P7 support
* Remove blank line at end of modules/Kconfig.simplelink
* Split struct and typedef for pinctrl_soc_pin/pinctrl_soc_pin_t
* Reference cc13x2_cc26x2/pinctrl_soc.h
* Reference cc13x2_cc26x2/soc.h
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
The structure k_cycle_stats uses the bool type. Consequently it
should include the stdbool.h header file.
Fixes#55972
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Move newly added `bt_data_get_len` and `bt_data_serialize` from `ead.c`
to `data.c`.
Also, removed unnecessary include of `zephyr/kernel.h`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
In case native IPv6 is disabled, Kconfig entries related to native IPv6
stack should not be enabled. Otherwise, circular dependencies can be
created if native stack is disabled, as in case of recent changes in
NET_IPV6_RA_RDNSS option (where a dependency for a native stack module
was enabled).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Because the DMA driver allows multiple start and stop calls for the same
instance and the same channel, we cannot rely on the error codes
returned by these functions to notify the device's power manager that a
device is still in use.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Moved PCIe probe from configure function to init function
because whenever uart_configure api is called MMIO address
is getting updated.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Added pclk parameter to set_baud_rate function in line_ctrl_set api
which was missed during update of set_baud_rate function definition
update.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Failures are seen with SOF digital mic capture test cases on Intel cAVS2.5
platforms if the SAR/DAR/CTL writes are skipped.
This reverts commit 08d9efb202.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
This commit updates the pull request backport issue check workflow to
use the Ubuntu 22.04 virtual environment.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This workflow and tests do not cover just Bluetooth anymore
but also cover other networking areas.
Rename the workflow and artifacts for clarity.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Do not provide the defautl prj.conf to cmake, as that
causes it to not use the board overlays, which is not
what users would normally expect.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
And configuration files with paths, quotes, etc.
Now it is possible to do, for example
conf_file='myprj.conf;boards/board_name.conf'
to provide both a project configuration and an overlay
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix#55957. The `bt_buf_get_evt` test was using `net_buf` structures
without allocating it properly.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The EGU has been modelled now. Add it to the list of
supported peripherals.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
