Add radio peripheral to nrf5340_cpunet DTS. The peripheral
description includes antenna matrix congiuration for Direction
Finding extennsion.
Appropriate binding file for nRF radio peripheral already egxists.
There is no default antenna matrix configuration. Antennas number
and GPIOS mapping to DFEGPIOS is project specific.
Complete configuration must be provided by end user as overaly.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The bq274xx fuel gauge does a softreset when configuring, after
which the device is polled and sealed. However the sleep logic
was inverted so the poll became blocking.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The STM32H7 series has a special ADC, which is calibrated
on the factory. The calibration values are stored in flash
and must be retrieved upon powering up the device.
Failure to calibrate the device leads to missing codes in
the ADC readings.
Fixes#35529
Signed-off-by: Lasse Sangild <lsangild@gmail.com>
This means a light requirements-doc.txt is enough for doc writers. See
previous discussions in PR #31199 and PR #31239
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
So when for instance adding some `import wrong_module` line to a sample
runner like bossac.py this adds the text between parentheses ( ) below:
The module for runner "bossac" could not be imported (No module named
'wrong_module'). This most likely means it is not handling its
dependencies properly. Please report this to the zephyr developers.
Test tip: changes to bossac.py do not trigger a fast, incremental doc
build. touch doc/guides/west/build-flash-debug.rst does it instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
When an ACL connection with active CISes terminates, inject CIS/CIG
teardown to ensure CIS is stopped before ACL disconnection completes.
This includes stopping CIG ticker when last CIS has stopped.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Maintaining the cis_handles array in ULL/LLL ISO group data amounts to
double book-keeping. This commit eliminates the array and introduces a
'getter' for obtaining CISes owned by a specific CIG, and iterate
through them.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When an ACL changes state to disconnected, all associated ISO channels
must be disconnected and cleaned up. This commit ensures that.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Use of CONFIG_THREAD_RUNTIME_STATS was added to this sample, but
caused issue because the call to z_thread_mark_switched_in()
is using k_cycle_get_32() before the timer is initialized.
Enable CONFIG_THREAD_RUNTIME_STATS_USE_TIMING_FUNCTIONS=y to
select hidden config CONFIG_TIMING_FUNCTIONS_NEED_AT_BOOT,
which calls to initialize the timer needed at boot for thread
runtime stats configuration.
Fixes#33275
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The CMake variable `TFM_ISOLATION_LEVEL_ARG` was not properly set when
application configures higher isolation level. This led to isolation
level always being to set 1.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
Fix typo in configuration phase to prepare the driver
for incoming add of Interrupt driven uart mode.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Add the ability to map file/dir paths of a PR to twister TAG. We
introduce scripts/ci/tags.yaml to conveys which files are associated
with which tag.
Since not all file/tags will be specified in tags.yaml we use the
combination of the files modified list and the tags.yaml information to
determine which tags can be excluded (ie if the file list doesn't match
any file in tags.yaml for a given tag listed there, we can that exclude
it).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds @Thalley and @asbjornsabo (and the others
from the parent directory) to the babblesim audio
test directory.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix the settings in lpcxpresso55s69_ns.yaml to reflect the normal amount
of flash/ram that is allocated to the non-secure side.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT must be set for 802154_rpmsg
sample to properly allocate timers for nRF-802154 driver.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Moved can, spi, usb, usb_fs_phy nodes to f103X8 dts.
Adds CAN for f103X8 series.
Tested on stm32f103c8 soc.
Tested on stm32f103vb soc.
Signed-off-by: Bhavesh Bhojwani <bhaavesh.bhojwaani@gmail.com>
The Google server that the sample connects to sends a larger certificate
since recently. As the overall size of the message conveying the
ceritificate is ~4700 bytes now, current mbedTLS configuration did not
allow to reassemble the message and thus caused failure during the
handshake.
Fix this by increasing MBEDTLS_SSL_MAX_CONTENT_LEN parameter (with some
extra space for any future changes).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align cavs25 with cavs15/18 and add memory segment for uncached mapping
of the SRAM to linker script. Assign sections to uncached and cached
segments as done in cavs15/18.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Policy manager header has to be in the include for applications.
Also it had several function prototypes that are not part of the policy.
These functions were moved from the policy header to a dedicated private
header.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
PM_STATE_INFO_DT_ITEMS_LIST macro documentation was wrong. The example
usage was returning the wrong type and the macro name was also not
correct.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
I made an alignment error in a dts binding, but the build was
successful. After some debugging I found the following warning
explaining the problem:
'/home/casper/src/zephyrproject/zephyr/dts/bindings/gpio/
gpio-keys.yaml' appears in binding directories but isn't valid
YAML: while parsing a block mapping
in "<unicode string>", line 11, column 8
did not find expected key
in "<unicode string>", line 18, column 9
I think this should be an error as there shouldn't be any invalid yaml.
Signed-off-by: Casper Meijn <casper@meijn.net>
The macros are used to get the pin(s) of a given driver instance. Add
_INST prefix to match convention used by the devicetree.h. The original
macros can now be used to obtain pin(s) of an arbitrary device instance
identified by the nodelabel.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Use ticker_yield_abs interface to make scan window on
primary channel to yield when trying to scan auxiliary PDUs.
Fixes#30244.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add ticker_yield_abs interface to reduce ticks_slot_previous
value when radio events yield/stop earlier than their time
reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
