Following issue is addressed in this bugfix:
When using offloaded sockets with modem ublox_sara_r4,
the socket is only closed if it is in connected state
at the time of the function call. When using UDP sockets,
this leads to a socket never being closed.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Calculation of RSSI was done incorrectly for Sara U201.
When evaluating +CSQ command responses, the RSSI can be calculated
from the first value, which is <signal_strength>. Instead, the
RSSI was calculated from the second value, which is <qual>.
With the subsequent mapping to RSSI, this results in a wrong
value for RSSI.
This is now corrected by using value <signal_strength> to calculate
the RSSI.
Tested using Sara U201.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
This commit references modem_pin() and modem_shell()
modem_pin(): use new gpio api
The existing pin driver does not respect gpio
configuration in device tree for active high / low
This commit allows for the device tree to determine the
active logic level.
modem_shell(): use correct string length
The ms_send macro uses iface.write() to send a string.
iface.write() requires the length of the string not the
size of the string.
This commit corrects the string length.
drivers: ublox-sara-r4: fix vint polling
This eliminates the implication that the enable and disable values can
be something other than 1 and 0, and fixes the code so it won't enter
an infinite loop if the GPIO read returns an error.
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
In order to avoid retransmissions from the peer's side
on active connection close, acknowledge the incoming FIN+ACK
in FIN_WAIT_1 state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
We cannot directly use the local address in net_context when
registering the connection as it is not proper type. So create
temp address variable for that purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Avoid dynamic allocations and all the issues if we run out of
memory, by placing the connection endpoint directly to TCP
connection struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we build this driver with CONFIG_UART_ASYNC_API enabled we get the
following build error:
uart_sam0.c: In function 'uart_sam0_init':
uart_sam0.c:558:35: error: redefinition of 'dev_data'
558 | struct uart_sam0_dev_data *const dev_data = DEV_DATA(dev);
uart_sam0.c:498:35: note: previous definition of 'dev_data' was here
498 | struct uart_sam0_dev_data *const dev_data = DEV_DATA(dev);
Fix this be removnig the duplicate at line 558.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The params in the macro's were a bit confused in what was cell_name and
what was name. The order was correct and matched other _BY_NAME macros.
Rename the params to just 'name' and 'cell' to match other macro's and
fix any other minor issues associated with this confusion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The macros should have been DMAS_CELL_ not DMAS_CELLS_ as this matches
the other devicetree macro naming convention.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Avoid entering an infinite loop when configuring the the NXP Kinetis
LPUART IRQ.
Fixes 9a65318a5b.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for multiple advertising set. Move the advertising state
flags to be per advertising set and loop over advertising sets instead
of looking up legacy advertiser set or handle 0.
Since it is not certain that the advertising set terminated event can
arrive directly after the connection complete event there is currently
a limitation that there can only be one local identity used by
connectable advertisers at a time. This guarantees that we know
the local identity being used in the connection complete event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Only attempt to restart the background scanner in connection complete
event when the new connection is a master role connection or the
initiator was successfully canceled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable enhanced connection complete when extended advertising has been
enabled. This event is mandatory if extended advertising is supported.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Runtime initialization failed to reset the lock field, causing
problems when the pipe object is located on a stack and passed by
reference to other code. Lacking an API for initializing a spinlock
by itself use the idiom from _K_PIPE_INITIALIZER().
To simplify maintainability the initialization order is changed
slightly to match the structure field declaration order.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update documentation about IC variations. Now SoC supports both
variations A and B and this board is compatible with both.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Update documentation about IC variations. Now SoC supports both
variations A and B and this board is compatible with both.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Bug fix and improved `payload` handling in `http_client_req`.
Changes to `http_client_req` behaviour:
If the user provides `payload_len` it is used to generate the
`Content-Length` header. This is done even if `payload_cb` is used to
provide the actual data. If no `payload_len` is specified then no
`Content-Length` is generated.
If `payload_cb` is provided it is called to send the payload data.
Otherwise `payload` is used as the payload buffer and sent. If
`payload_len` is not zero, it is used as the size of `payload`.
Otherwise `payload` is assumed to be a string and `strlen` is used to
determine its size. This is to maintain current behaviour and not break
existing samples.
Fixes#24431
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Convert driver to use new DT_INST macros throughout. Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references
where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace use of Kconfig UART_X symbols by calls to DT API.
Clean driver from symbols definitions
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert driver to use new DT_INST macros throughout. We can remove
various defines from dts_fixup.h now as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We remove the
aliases and use nodelabel instead in the soc_gpio.h to determine the
label for the specific gpio controller.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. This allows us to
also remove dts_fixup.h that are no longer used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This selects CONFIG_BT_HCI_RAW_H4 which indicates to hci_raw to handle
H:4 header automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes hci_raw to manage RX and TX buffers so its logic don't have
to be replicated on each an every driver/application, it also makes it
simpler to deal with extra headers for H:4 mode since that then can be
done at earlier at buffer allocation.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for registering a command extention table which is
used to match incoming commands and then pass the buffer to its
function handler.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds 2 config options which enables hci_raw to work in
H:4 mode and enable it by default automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Buffer are allocated with K_FOREVER should never fail, in addition to
that asserts needs to be enabled and is not worth converting to runtime
check given the use of K_FOREVER.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allowing to configuring the MPS different then the buffer size might
actually generate data fragmentation/reassembly so this just use
BT_BUF_RX_SIZE which is set accourding to the controller buffer size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allowing to configuring the MPS different then the buffer size might
actually generate data fragmentation/reassembly so this just use
BT_BUF_ACL_SIZE which is set accourding to the controller buffer size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds USB_PID_BLE_HCI_H4_SAMPLE along with it driver which uses H4
over bulk endpoints.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The unique identifier for this platform is a 96-bit value, where the
upper 56 bits provide an ASCII encoding of the lot number, and the
lower 40 bits provide the wafer number and X, Y position on the wafer.
Extract the value into big-endian form for device-independent
interpretation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
No in-tree boards support the NINT signal on an SX1509B IO extender,
so test using custom overlays/configurations for the Particle Xenon
board using an SX1509B breakout board.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
