Reject the security request immediately when receiving a security
request that does not support LE Secury Connections pairing.
This would have been rejected during the pairing procedure, but
PTS testing expects the security request to be rejected.
Ref: GAP/SEC/SEM/BV-29-C
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Flexcomm's SPI SSEL (or CS) will be held until frame end.
FIFOWR[EOT] (kSPI_FrameAssert enum) is the register not set.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Not all watchdog devices support a warning callback before reset. If
the driver refuses to accept that configuration record the test as
having passed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Modify the tests so that they verify that only allowed thread
is able to modify network interface data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_if a kernel object with type K_OBJ_NET_IF so that we
can restrict access to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Per the nrf9160 datasheet, UARTE must be disabled prior to configuring
PSEL.TXD, PSEL.RXD, PSEL.CTS, and/or PSEL.RTS. This also ensures that
any prior running code, such as a bootloader, which leaves the UART
enabled will not prevent the Zephyr application from changing the
configuration.
Make a similar change also to the uart_nrf_uart.c driver for the
nRF5 series.
Fixes 27080
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
There was a race condition when ppp_fsm_open() was called in CLOSED
state. Conf-Req was sent first, then state was changed to
REQUEST_SENT. In the meantime however we have already received Conf-Req
to which we responded with Term-Ack.
Change state before sending Conf-Req, so we handle Conf-Req from peer
properly instead of dropping it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When using CONFIG_BT_CONN_DISABLE_SECURITY bt_gatt_check_perm would
ignore not only the security sensitive permissions but also access
related ones causing crashes since the callback would be NULL.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Need to call PINT_Init to initialize the block
before using it. This fixes the issue seen on
RT600 with the button example
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
We cannot call into the power library API as it is currently
available in binary format which cannot be included
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
- Use common clock names to avoid build error.
- Use GPIO_PortInit() to do reset/clock initialization. Only clock
enable is not adequate for RT600.
- Update to support differences between IOCON and IOPCTL modules
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Found out that thread tests doesn't test next ideas of requirements,
which I think necessary to be tested and verified:
-the kernel need to prevent user threads creating new threads from
using thread or thread stack objects which are in an initialized state
-Upon thread exit, the kernel need to mark the exiting thread
and thread stack objects as uninitialized
Add new tests to test requirements above, that way we can cover more
features to be tested:
- test_new_user_thread_with_in_use_stack_obj()
- test_mark_thread_exit_uninitialized()
2. Modified test test_create_new_thread_from_user() to verify that
kernel provides new user threads access to their own thread object.
3. Also I added detailed Doxygen tags for each new test and existing
modified test.
4. Added Doxygen tag to the existing test test_stack_buffer, it
covers requirement:
-The kernel need to provide all threads read and write access to their
own stack memory buffer.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
By adding a prompt, users can alter the default value
of SHELL_LOG_BACKEND.
While it makes sense that when you have a shell, the log
messages will, by default, be shown there,
sometimes you want to disable this selection.
For example, when you have a telnet shell (SHELL_BACKEND_TELNET)
and want to debug the network subsys.
Signed-off-by: David D <a8961713@gmail.com>
Update hci_uart sample configuration for buffers to work with the
extended advertising HCI commands and events.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Continuation of abafd8eb22 which missed to update the
board configuration for nrf9160dk_nrf52840.
Update main stack size for nrf5 boards. This is to support an
alternative hci_driver that has a higher stack size usage in hci driver
open. Measured stack usage in this case to 808/1024.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the nrf51_blenano board configuration which does not build,
exceeding the SRAM with over 2k bytes.
Align the configuration with the same options used to make the
bbc_microbit board build for nrf51 with 16K SRAM.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set name on HCI TX threads in HCI samples to make it easier to debug
stack size usage with CONFIG_THREAD_ANALYZER.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Inside function futex_wake() result of k_futex_wait() is not checked.
Coverity-CID: 211508
Fixes: #27149
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Now that the patches have landed, enable more of the peripherals on
the board.
In particular:
* Enable PWM on the LED
* Enable the SPI, USB, and DMA
* Enable the bootloader support
* Add to the PWM and SPI tests
* Call these out in supported.yaml
Signed-off-by: Michael Hope <mlhx@google.com>
An old doxygen biolerplate was being copied all over the tests. The
defined groups are not being used anywhere and it does not follow how we
document tests for example in the kernel and other places.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are multiple CID errors all based on the test of
'socket > ESWIFI_OFFLOAD_MAX_SOCKETS'. The test needs to
be '>=' in all cases.
Fixes: #27138Fixes: #27139Fixes: #27140Fixes: #27141Fixes: #27142Fixes: #27143
Signed-off-by: David Leach <david.leach@nxp.com>
OpenThread API is not thread safe, therefore it shall be protected
from being preempted by OT thread, or other thread issuing API calls.
The problem showed up after a recent OpenThread upmerge, where changes
in the Joiner class made this problem visible. W/o extra protection,
`otJoinerStart` call can be preempted by the OT thread, leading to an
unexpected behavior.
Introduce new function to allow to lock any API operations for others.
Anyone willing to call OT APIs, shall lock the mutex first to get
exclusive access to the stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`otLinkRawSetEnable` was removed and Link Raw mode is now enabled with
`otLinkRawSetReceiveDone` which requires to register a callback
function. Since it makes little sense for OT L2 to register a Link Raw
callback in current setup, leave it up to the application to register
the callback.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There may be value in being able to rename a subtree, but there is no
identified need to be able modify the text of an assigned subtree.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add details of the LVGL7 update (e.g. warn about higher ROM usage,
changed Kconfig defaults, ...)
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add a note to warn users about the need to adjust
CONFIG_LOG_STRDUP_BUF_COUNT and/or CONFIG_LOG_STRDUP_MAX_STRING when
deferred logging is enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Update LVGL to version 7.0.2. Notable changes in v7 include:
- New drawing system (note that it uses much more ROM than previous
versions)
- New style system
- Some objects have been renamed (current changes do not align yet
Zephyr Kconfig settings with LVGL)
- New fonts with more sizes (e.g. Montserrat, replacing Roboto)
- Theme changes (most have been removed, default is now Material)
Note that constant defaults have been aligned with LVGL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
By fixing the issue: #21819 in the shell, it is no longer needed
to keep a workaround, which allows prompting i2c bus name.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
It is not needed by the command to have subcommand in order to be used
for prompting. Removed this condition from the shell engine.
Fixes#21819
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
TI CC32xx does not support binding the same port to multiple sockets,
but instead uses the IPv6 socket to handle both IPv4 and IPv6
connections. This commit modifies the sample to reflect this.
In addition, Kconfig options are overridden in order for the sample
to take advantage of wifi and socket offloading on this platform.
Signed-off-by: Vincent Wan <vwan@ti.com>
