RCC_HSI48_SUPPORT is not always defined even if SOC support HSI48.
Ex: STM32H7 family which support HSI48 but doesn't have
switch RCC_HSI48_SUPPORT.
This switch is usefull when in the same STM32 family some soc have
HSI487 and some other soc not.
So instead, use CMSIS register defines (which depends on family)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ANCOUNT has nothing to do with label count so remove the
original while loop and just go through all the labels until
we have read all of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is not possible with valid DNS messages but is possible if
we receive malformed DNS packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It fixes:
../../../../include/toolchain/gcc.h:169:30: warning: statement will
never be executed [-Wswitch-unreachable]
169 | #define __fallthrough __attribute__((fallthrough))
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Marking as unused (ARG_UNUSED) the parameter device in the
initialization function z_clock_driver_init when it is not used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit adds the signing commands and the configuration required
to build a non secure image for a nucleo_l552ze_q.
Signed-off-by: Nolwenn Violette <nolwenn.violette01@st.com>
This commit adds a second target for the nucleo_l552ze_q board.
The non secure target is configured for TFM applications.
Signed-off-by: Nolwenn Violette <nolwenn.violette01@st.com>
Tests need to be adjusted to do the correct checks now that reference
count is incremented in z_reserve_fd() instead of z_finalize_fd().
test_z_fd_multiple_access in particular has been simplified to
reserving an fd in one thread and freeing it in the other.
Signed-off-by: Vincent Wan <vwan@ti.com>
The new fd entry should be reserved by incrementing its reference count
in z_reserve_fd() instead of z_finalize_fd() in order to avoid having
the same one being returned in a concurrent call. If for some reason
the fd is not finalized after z_reserve_fd() is called, it can be
freed via z_free_fd(), which would decrement the reference count.
Fixes#27721
Signed-off-by: Vincent Wan <vwan@ti.com>
If user has enabled SOCK_DGRAM support for AF_PACKET type, then
use that in the packet sample application instead of SOCK_RAW.
This simplifies the application as we do not need to handle
the Ethernet frame when sending or receiving the packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the largest sockaddr_xx_ptr length is defined
last. Otherwise we might copy wrong amount of data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add some tests for testing AF_PACKET and SOCK_DGRAM type
sockets. These are sockets where Ethernet header is automatically
added, caller just needs to provide upper stack header.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to create SOCK_DGRAM type AF_PACKET socket. This
allows user to send raw IP packets without specifying
L2 (like Ethernet) headers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The steps_removed field must be placed right after root_system_id
so that priority vector comparision can be done in one memcmp()
call. This fixes the best master clock selection algorithm (BMCA).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Saves us a few bytes of program text on arches that don't need
these implemented, currently all uniprocessor MPU-based systems.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All of these should be no-ops for the following reasons:
1. User threads cannot configure memory domains, only supervisor
threads.
2. The scope of memory domains is user thread memory access,
supervisor threads can access the entire memory map.
Hence it's never required to reprogram the MPU on the current CPU
when a memory domain API is called.
This does not address the issue #27785 if a user thread in the domain
is running on some other CPU.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All of these should be no-ops for the following reasons:
1. User threads cannot configure memory domains, only supervisor
threads.
2. The scope of memory domains is user thread memory access,
supervisor threads can access the entire memory map.
Hence it's never required to reprogram the MPU when a memory domain
API is called.
Fixes a problem where an assertion would fail if a supervisor thread
added a partition and then immediately removes it, and possibly
other problems.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We make a policy change here: all threads are members of a
memory domain, never NULL. We introduce a default memory domain
for threads that haven't been assigned to or inherited another one.
Primary motivation for this change is better MMU support, as
one common configuration will be to maintain page tables at
the memory domain level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't have use-cases and it introduces complexities with
allocating page tables on MMU systems.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
LVGL objects have been alphabetically sorted. The aim of this change is
to help locating objects as well as keeping track of them.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
LVGL Kconfig settings have been splitted into more granular units in
order to improve readability and maintenance.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Align all Kconfig option names with LVGL names. The followed rule:
LV_(.*) -> CONFIG_LVGL_(.*).
Also replaced LVGL boolean configuration entries using if/else/endif
with direct IS_ENABLED macro.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fixes: #27237
This commit fixes an issue when `zephyr_module.py` was executed outside
a west workspace.
This would happen when build an out-of-tree (out-of-workspace)
application, in which case the current west workspace would be unknown.
This is now changed, so that execution of `zephyr_module.py` will be
done in the current Zephyr base.
This ensures that the west workspace that holds the current Zephyr will
be the same workspace used for west list, and hence solve fix the issue.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit adds the LiteX I2S devices usage example with:
- i2s rx and tx initialization,
- i2s rx and tx configuration,
- i2s rx receiving,
- i2s tx sending.
An application is a simple sound loopback - it allows to connect
a music source and a receiver such as headseat and listen to it.
Signed-off-by: Pawel Sagan <psagan@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This removes a cast when getting the isr eth address from the isr table.
Signed-off-by: Pawel Sagan <psagan@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
