This makes the 72Mhz HFRCO drive the MCU HF clock, and only uses
the HFXO to drive the ethernet clock.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
This defines the TRNG for EFM32GG11 and enables it for trng0
in the dts for the matching development kits.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
This defines wdog0 and wdog1 for the EFM32GG11 MCU and enables wdog0
in the dts for the matching development kits.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
The west build command has historically tried not to rm -rf
directories that don't look like zephyr build directories. The way it
does this is by checking for the presence of a CMake cache
with a Zephyr-specific variable (ZEPHYR_TOOLCHAIN_VARIANT) in it.
The problem with this approach is that if the build system fails
before this cache variable is set, the directory doesn't look like a
zephyr build directory, and therefore west build won't make it
pristine even with --pristine=always, even though build directories
resulting from failed runs like that are almost certainly
irrecoverably broken and need to be made pristine before anything will
work.
This leads to users having to rm -rf their directories manually, which
is not so nice.
To avoid this from happening, just check for ZEPHYR_BASE, which is
set early on in ZephyrConfig.cmake in 'modern' zephyr build systems.
Keep the ZEPHYR_TOOLCHAIN_VARIANT check in place for compatibility.
We could consider being less selective and just using shutil.rmtree()
whenever we have --pristine=always, but that would be a bigger
behavioral change than I'm comfortable doing without a good reason.
Fixes: #28876
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the new DT facilities to configure ADC pinmux on all boards with
STM32 MCUs currently supporting the ADC.
Signed-off-by: Martin Jäger <martin@libre.solar>
While the STM32H7 features a special dual mode operation for ADC1 and
ADC2, the register specified for adc1_2 node was actually the one for
ADC1 in normal single mode operation.
This commit fixes register for dual mode and adds adc1 and adc1 nodes.
Signed-off-by: Martin Jäger <martin@libre.solar>
ADC shell commands can be only executed on the property label
existing in the device tree. It is realized by the dynamic subcommand
returning existing ADC Label.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The channel command has been extended with subcommands: id, positive,
and negetive. Some boards require positive input configuration before
measurement can be started.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Use dedicated shell macros so argument count can be validated before
the command handler is executed. This change simplifies the command
handlers implementation inside the adc_shell file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Changed gain and reference commands to dictionary commands.
This change removes an obsolete look-up table (string <-> value)
for gain and reference commands.
Now, each modification of gain or reference value will require only
a dictionary command update.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
'remap' value can never be REMAP_FULL for usart.
Fix this value depending on the usart instance.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Stable API change: modify parameters of clock_control_async_on which
previously took a structure which contains list node, callback and user
context. Removing list node and replacing structure with two parameters:
callback and user context. List node is removed because it has no use
in current API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Refactoring poll_out to be ready for handling preemption. uart_tx and
uart_fifo_fill modified so they are resilient to being preempted by
uart_poll_out.
Refactored uart_poll_out implementation to be common for interrupt
driven API and asynchronous API. In both APIs active state is detected
by evaluating state of ENDTX and TXSTOPPED events. If anyone is set it
means that new transfer can be started.
Patch is fixing existing issues:
- potential bytes dropping with flow control enabled
- busywaiting for ENDTX (asynchronous API) - poor performance
- potential bytes dropping during preemption
- potential uart_tx returning -EBUSY when interrupted poll_out
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test which is calling uart_poll_out from various contexts and
asynchronous/interrupt driven API. Test is validating that calls
can be preempted at any moment and no data is lost.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Commit ac31c4e458 updated the mcux
ethernet driver to get the ethernet peripheral base address from device
tree instead of an nxp hal preprocessor macro. This exposed an error in
the k6x device tree and caused a runtime assertion in networking
applications on the frdm_k64f board:
ASSERTION FAIL [instance < (sizeof(s_enetBases) / sizeof((s_enetBases)[0]))] @ WEST_TOPDIR/modules/hal/nxp/mcux/drivers/kinetis/fsl_enet.c:323
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Clip the timeout to 64 seconds, this avoids the timeout value to
increase to high values (e.g. several years).
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
This avoids code duplication. The same logic was present
in dhcpv4_send_request() and dhcpv4_send_discover().
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
The existing testcase's doxygen describes are the general
implementation idea of a function.On this basis, adding
more descriptive statements to describe which conditions
need to be preset when running the testcase, which test
techniques are applied, and describe the testcase Design
steps in detail. Make it more readable.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
If neither a random address nor a specific local address is in the
device tree, then use the MAC address from the device information page.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
The TCP2 was calling accept callback before actually finalizing
the connection attempt.
Fixes#29164
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This was causing stack usage to be right on the margin
for some platforms, without a clear reason why it
needs to be here (it was copied from another test case
which no longer exists).
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Originally the EFI boot code was written to assume that all sections
in the ELF file were 8-byte aligned and sized (because I thought this
was part of some platform spec somewhere). This turned out to be
wrong in practice (at least for section sizes), so the requirement was
reduced to 4 bytes. But now we have a section being generated
somewhere that turns out to violate even that.
There's no particular value in doing those copies in big chunks.
There's at best a mild performance benefit, but if we really cared
we'd be using a more complicated memcpy() implementation anyway.
Replace the loop in the C code with a bytewise copy, change the size
field in the generated header to store bytes, and remove the
assertions (which were the failuers actually being seen in practice)
in the script that were there to detect this misalignment.
Fixes#29095
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Both threads, 4 and the ztest_thread (test_thread_join) where
joining thread5. If thread 4 is scheduled before the
main thread it will be dead before the main thread
had chance to join it. Just changed thread 4 priority to ensure that
this problem does not happen.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The cached device pointer must be placed in memory that allows user
mode invocation of the test functions to access it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor use of 16-bit common GATT UUID types where a complete UUID
object is declared on the stack only to use the 16-bit value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When converting ELF to a flashable image, the esptool can only
process up to 16 ELF sections. Zephyr has been happily grouping
similar objects into linker sections which can easily go over
esptool's limit. This patch consolidates the kernel, net, log,
and shell objects into their own sections.
Also remove the app_noinit section as no one is emitting
anything into that section, and it's not being used by other
arch/SoC/boards in Zephyr.
Fixes#20980
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v1.03.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/5
(merged as b52fdbf4b62439be9fab9bb4bae9690a42d2fb14)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The interrupt enabling routine was called before the
chip enabling routine resulting in a runtime failure
when triggers are set.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The Cypress cy8ckit_062_wifi_bt kit is splitted on two directories.
There is no reason to keep it separated. This squash M4 and M0 boards
as one board file.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Reduce the size of the disconnect pool required the full MTU
for a disconnect request.
Also completely remove the pool when not needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If we run with --cmake-only we get the following:
`ERROR - Unknown status None`
Fix this by treating no status set as "passed" for the --cmake-only
case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 property for CAN nodes and remove pinmux.c.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martin Jäger <martin@libre.solar>
