These changes enable applications to restart the networking stack which
was previously not possible without rebooting the device. This was a
major show-stopper because it made power management impossible, and
furthermore made it impossible to recover from a bad modem state without
rebooting.
This has been verified to work on a SIMCOM7600E modem, both with and
without CONFIG_GSM_MUX enabled.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
The char pointer that is logged could get scoped out and so should be
strduped before logging.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Several utility macros must be given the name of a macro to apply to
every element in a sequence to transform it. When no transformation
is necessary a macro still needs to be provided. That macro is
IDENTITY.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Instead of having a .99 version, use latest and link to the lates
documentation on the left side bar.
The version number has been confusing users where it was difficult to
determine if they were looking at the development tree or some released
version.
Fixes#24453
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We rework the titles and headers of the section where we
describe the process for submitting new module and changes
to existing modules. Move the 'requirements' section at the
top of the page.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We move the section about how to build Zephyr and integrate
with modules into its own section with title
'Integrate modules in Zephyr build system'.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the module documentation page, add a section to describe
the requirements and the allowed practices for synchronizing
the module code base with the upstream project.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the module documentation page, add sections for
Testing and Documentation requirements. Add also a
section decribing polices for module deprecation and
removal.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding content to describe policies and requirements
around licensing in Zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a section that summarizes the recommended
contribution workflow in zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Submit a paragraph that summarizes the different
individual roles in Zephyr module repositories.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Capture the discussion regarding which external projects
should be considered as candidates for zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Rename the devicetree/adc.h header file to devicetree/io-channels.h to
reflect that io-channels are used for both ADC and DAC devicetree
phandles.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Always run thread_b on CPU 0 by setting cpu_mask if on SMP system.
Run this with CONFIG_SCHED_CPU_MASK=y set on an SMP system.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Windows 10 sends ECN-Echo and Congestion Window Reduced (CWR) flags
together with SYN flag in the connection establishment but the code
did not ignore these flags and send just SYN back (instead of SYN|ACK).
This caused the connection establishement in application level to
fail as the application was never notified about it.
Fixes#29258
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit moves IPv6 initialization from OT init to OT start to
avoid unwantedly bringing 802.15.4 radio up.
Previously, even when OT manual start was enabled, the radio would
be receiving frames resulting in unnecessary power consumption and
causing issues for instance when the device just wants to use
Bluetooth for provisioning befor moving to Thread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Another team reported that current default values for number of allowed
IP addresses per child (4) and and max number of children (10) are too
small for some customers.
Increased the values allowed configuring child count.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
OpenThread mac counters require rx failed notification to work properly.
Made use of previously implemented notification.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Thread implements couple of counters that require notification of failed
frame reception.
Implemented RX failed notification.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Add prompt to USB_DEVICE_NETWORK_ECM_MAC Kconfig option to allow
users to change it. The current default value is assigned for
documentation purposes in RFC 7042.
Signed-off-by: Joakim Algrøy <joakimalgroy@gmail.com>
Attempting to initialize PPP without first ensuring we're attached to
the network packet service will sometimes lead to "NO CARRIER" errors
when we initialize PPP with the modem. This has been observed
reproducibly on some SIMCOM7600E modems.
This commit holds off on PPP initialization until modem has reported
that it is indeed attached by using the "AT+CGATT?" command (see 3GPP TS
27.007)
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
This test is generating build warnings as it is making
checks that can never be false.
This reverts commit a4f1a5f58f.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The only user of the I2C instances is the esp32 driver. Move the
Kconfig symbols down to the esp32 Kconfig for the instances it needs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
According to west-flash option description it's allowed to use
west-flash without parameter:
> There are three ways this option is used.
> 1) bare: --west-flash
> 2) with a value: --west-flash="--board-id=42"
> 3) Multiple values: --west-flash="--board-id=42,--erase"
However, we don't allow to west-flash to be without parameter
when we verify sanitycheck arguments. Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Enable HW stack protection by default in the board
definitions of ATMEL-based platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
According Mesh Spec 1.0.1 Section 7.2.2.2.1 Advertising
A node that does not support the Proxy feature or has the Proxy
feature disabled shall not advertise with Network ID.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Support for the NUCLEO-L011K4 development board with STM32L011K4 SoC.
Although the SoC only contains 16K flash and 2K RAM, it has been tested
on a number of samples and has worked as expected.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
This commit fixes an issue where providing a list of overlay files for
dts was not handled correctly.
The means that using `-DDTC_OVERLAY_FILE="file1.overlay;file2.overlay"`
would fail as those two file names would be concatenated into a single
file name.
This is fixed by properly quote the `DTC_OVERLAY_FILE` variable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
A GPIO's parallel output bit in the parallel output
registers is read-only until the AOD bit is set to 1
in the pin's control registers. The proper sequence to
preset the state of an output pin is:
Configure pin as input with AOD=1 in the control register
Set pin state in the parallel output register
Set direction to output in the pin's control register.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Fixes: #29235
This commit ensures that roots are being converted to posix paths.
This fixes the issue where windows style path (containing `\`) would
result in DTS dependency file to contain mixed style path separator and
thus causing Ninja to re-invoke CMake in an endless loop.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Users testing beacon capability will likely want to see the beacons in
a sniffer tool. Switch to an advertising mode that uses a persistent
known address, and display that address on the console output.
This also demonstrates techniques to retrieve the advertising address
where one is known.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Document the distinction between the existing non-connectable
advertising configurations, and add one that uses identity which will
be the same for all beacons.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Found out that important requirements are not tested by current
kernel objects tests. Decided to fix that situation
New added tests:
1. test_kobj_assign_perms_on_alloc_obj()
Create kernel object semaphore, dynamically allocate it from the
calling thread's resource pool.
Check that object's address is in bounds of that memory pool.
Then check the requestor thread will implicitly be assigned
permission on the allocated object by using
semaphore API k_sem_init()
2. test_no_ref_dyn_kobj_release_mem()
Dynamically allocated kernel objects whose access is controlled by
the permission system will use object permission as a reference count
If no threads have access to an object, the object's memory released.
3. test_krnl_obj_static_alloc_build_time()
Take addresses of the kernel objects which are statically allocated
during the build time and verify that they are not null.
That kernel objects shouldn't require manual
registration by the end user.
4. Clean-up. Removed unused variable from userspace test.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
