Rearrange the LL interface functions in the ll.h file to
group functions use by HCI separate from other buffer and
control flow related functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the controller version define into ll_feat.h file to
keep the version number and featureset bitmaps together.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added 3 utility functions :
- lwm2m_engine_update_period_service() which updates the period of a
given service.
- lwm2m_engine_update_period_min_observer() which updates the
min_period_sec for a given observe node.
- lwm2m_engine_update_period_max_observer() which updates the
max_period_sec for a given observe node.
Signed-off-by: Thomas LE ROUX <thomas.leroux@smile.fr>
The following two lines are duplicated in boilerplate.cmake
```
zephyr_file(APPLICATION_ROOT BOARD_ROOT)
list(APPEND BOARD_ROOT ${ZEPHYR_BASE})
```
This commit removes one set of the duplicated lines.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There was some code to demonstrate the cpu_mask API here, but it was
asymmetric (only thread B was pinned) and assumed exactly two CPUs.
Start both threads pinned to CPUs 0 and 1 from an external main, and
predicate the pinning on there actually being more than one SMP CPU.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
CAN_SYNC_SEG and ts1 are in common units. Both need to be scaled by 1000
to calculate the sample point.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Move LLL header files for all roles to common folder. Move
vendor-specific content to internal header files, in particular ADV
buffer handling. Define the vendor-specific type lll_adv_pdu in a
separate header file lll_adv_pdu.h to avoid cyclic dependency when
moving ADV buffer handling to internal header file. Make sure all
internal header files are in vendor-specific folders.
The goal is to have a more consistent structure for LLL header files
and allow unconditional inclusion of non-internal LLL header files.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Update ci and docs to reference SDK 0.12.3. Update to SDK 0.12.3 as
it includes fixes for support ARM Cortex-M55.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Added implementations of otPlatCAlloc and otPlatFree methods
necessary for the OpenThread in case of using EXTERNAL_HEAP.
* Added CONFIG_OPENTHREAD_DNSSD_SERVER option to allow enabling
OT_DNSS_SERVER feature.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
In the npcx i2c FIFO mechanism, the hardware will release SCL bus
immediately after the driver reads data from FIFO. That's why we need
to hold SCL bus before configuring the next transaction. Once it was
done, the driver release the bus for the next transaction.
But during the last transaction, the driver releases SCL first then
starts a STOP condition. At this moment, the SCL is pulled high by PU
resistance and driven to low for generating STOP condition later. This
additional clock might influence some i2c devices if they don't reset
their state machine after receiving STOP.
This CL fixes this issue by two steps:
1. Distinguish that it's the last read transaction with STOP condition?
2. If so, issue STOP condition before reading FIFO instead of holding
SCL bus. Then the hardware will generate it immediately after reading
FIFO.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Remove the depency on host emulation of ECC for the Use debug keys
option.
This allows the application to use debug keys without shifting the
ECC from the controller to the host, which could potentially alter
the behavior of the application and make debugging this way less useful.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add definitions for the HCI command LE Generate DHKey v2.
This command includes the option to use the debug private key.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the ECC emulation setting the supported command bits in order
to group the supported commands together with the implementation of
these commands.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to avoid stalling LLCP procedures blocking done event
processing, done events are now put in a separate memory queue,
and processed by own mayfly function.
This ensures prepare/done refcount balancing and prevents assertion
due to lack of done events.
Signed-off-by: Morten Priess <mtpr@oticon.com>
We need to make sure aux is cleared on reset, otherwise we may end up
with legacy advertising with aux.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Set #0 is used for legacy advertising when legacy HCI commands are used
and in such case it's possible to enable advertising without any prior
configuration. This means we should better always have PDUs in set #0
initialized with default empty data.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We should remove all advertising sets when resetting controller. It's
enough to just clear is_created flag for each set.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The definition to check if timers have up to 6 channels was causing
warnings when -Wexpansion-to-defined was enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The first uart instance was already devicetree based. To be consistent
convert the second instance to also be devicetree based.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removes the 3 byte padding at the end of each proxy connection's rx
buffer.
Fixes#18509.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
QDEC_NRFX shall depend on either HAS_HW_NRF_QDEC,
or HAS_HW_NRF_QDEC0, since in the nRF5340 Application
core definition we select HAS_HW_NRF_QDEC0 instead of
HAS_HW_NRF_QDEC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add device tree nodes for QDEC peripheral instances
for nRF5340 Application core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add Kconfig options to signify that the nRF5340
HW has support for QDEC instances. Select the
options in the nRF5340 Application core definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This driver missed #32228 PR that converted STM32 drivers
to use DEVICE_DT_GET for clock activation.
Due to the renaming of STM32_CLOCK_CONTROL_NAME to
STM32_CLOCK_CONTROL_NODE, driver could not compile anymore
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The choice allowed for using TFM's own default. We now need full
knowledge over whether BL2 is enabled or not (e.g. to do signing),
so remove this option and simplify to a bool.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The wrapper function detects when a logic-level initial value requires
inverting the physical level initial value, and updates the flags to
effect the necessary change. However where logical and physical
levels are not inverted the flag requesting logic-level initialization
was left in place and passed to a driver that got confused by it.
Clear the flag after its purpose has been addressed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
