Refactors the i.MX RT600 SoC series to be more consistent with the i.MX
RT10xx SoC series by choosing a child node (external flash device) of
the FlexSPI bus for zephyr,flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
With this patch, zephyr can enable SMP directly. Otherwise
zephyr needs TB-R to provide psci function.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Armv8-A and Armv8-R both support PSCI. So PM_CPU_OPS_PSCI's
dependency should be "ARM64" rather than "ARMV8-A".
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add strong definition z_arm64_el2_plat_init() and it is controlled
by CONFIG_SOC_FVP_AEMV8R_EL2_INIT.
VMPIDR_EL2 must be set manually on EL2. The purpose of VMPIDR_EL2 is
that holds the value of the Virtualization Multiprocessor ID and This
is the value returned by EL1 reads of MPIDR_EL1
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add psci and more cpu nodes into fvp_baser_aemv8r.dts. The purpose
of it is perparing to support SMP.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
The nrf9160dk_nrf9160_ns and nrf5340dk_nrf5340_cpuapp_ns don't have
enough space for debug builds as configured so excluded them from
this specific test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The commit adds support for Zephyr basic mgmt group to mcumgr.
The first command added to the group is storage erase command.
Authored-by: Sigvart Hovland <sigvart.hovland@nordicsemi.no>
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Tests check transmission, receiving beacons in situations
of IV update (with test mode on) and key refresh procedures.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
When zsock_close() is called, socket is freed before the mutex for the
socket is unlocked. If the freed socket is given to another thread
immediately, the mutex for the socket will be initialized by the new
socket owner, while the mutex is still locked by the thread calling
zosck_close().
Fixes#36568
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
When tcp_send_data() is called to resend data, but there is no data
to resend, zero length packet is allocated and NULL net_buf is passed
to net_buf_frag_insert() in which assertion fails.
Fixes#36578
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
Add some more example to the description of zephyr_library_amend().
This should help users to get input of the extra possibilities that this
function provides.
See: #35770
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
On the native_posix board global object constructors
are run by the underlying OS runtime init prior to
Zephyr kernel init. Thus Zephyr should not run global
object constructors a second time. Doing so breaks
application behavior that relies on global
constructors doing work that must be done only once.
See bug #36858 for more information.
Signed-off-by: David Palchak <palchak@google.com>
Avoid some cases of running out of disk space in the daily build. Add
setting -M option to remove artifacts as we build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There is a name clash when using G4 series LL TIM driver depending on
the inclusion order of the LL TIM and pinmux headers. If the LL headers
are included after pinmux is included, AF1 and AF2 definitions used by
pinmux clash with the AF1 and AF2 TIMx register names.
In order to solve this problem with minimum impact, the following has
been done:
1. Prefix the AFx and ANALOG definitions with STM32
2. In order to avoid changing all *-pinctrl.dtsi files, the STM32_PINMUX
macro contatenates STM32_ with the provided mode.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Updates CXX support documentation to reflect exception support
added in fixes for #32448 and #35772.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
This commit adds a new Kconfig option CLOCK_CONTROL_NPCX_EXTERNAL_SRC.
With this option enabled, the internal 32.768 KHz clock (LFCLK) is
generated by the on-chip Crystal Oscillator (XTOSC). Otherwise, the
LFCLK is generated by the Low-Frequency Clock Generator (LFCG).
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
NPCX power.c use LOG_MODULE_DECLARE(soc), but NPCX chip doesn't
register soc log module. This CL register soc log in soc.c to fix NPCX
build error for power management & log system.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Fix Periodic Synchronization setup when handling invalid
number of channel count in Periodic Advertising's Sync Info
structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This property has been marked as deprecated in 2.5.0 and was not
actually used for even longer time.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use macros to access SCA and Channel Map fields in the Sync
Info structure in advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated ISO test to demonstrate ACAD field in periodic
advertising PDUs. Here, test changing the periodic
advertising data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Based on review comments, refactor out sync_info population
to be performed by the caller of the function that prepares
the extended advertising PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the set/clear function to modify the common extended
header format in the PDU to add/remove ACAD.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to add/remove ACAD field in the common
extended header format of the periodic advertising PDU on
create/terminate BIG.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add CMake warning message when building experimental
features like Advertising Extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
refactor flash_page_get_info to simplify and to avoid using mixing the
usage of an off_t (offs) and an uint32_t (page_index).
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
adv_sync_hdr_set_clear was just wrapped by ull_adv_sync_pdu_set_clear
so we can merge both into single function.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds simple helper to update CTEInfo. It assumes proper periodic
adv PDU as input to simplify code.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds some initial support to update AD in chain. We still only
support placing AD in 1st PDU, but this will properly copy any linked
PDUs that may be added due to e.g. CTEInfo present.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds adv_sync_pdu_init helper which initializes pdu_adv buffer
with contents of AUX_SYNC_IND/AUX_CHAIN_IND PDU. Extended header flags
can be specified to reserve required space for corresponding fields if
necessary.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This enables chaining ota for periodic advertising. AUX_CHAIN_IND PDUs
will be sent automatically if AuxPtr is detected in preceding PDU.
AuxPtr offset is always set to achieve minimal required frame spacing,
i.e. 300us (T_mafs). AuxPtr in all PDUs in advertising train are
updated on enqueue since PDU spacing is already known at that time so
we do not need to waste time in LLL.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds support to allow advertising PDUs to be linked which is
required to send advertising trains, i.e. AUX_CHAIN_IND.
PDUs are linked with a simple single-linked list, the pointer to next
PDU is stored at the very end of PDU buffer. This prevents it from
being overwritten if PDU is modified and allows for build time offset
calculation.
There are few helpers added to make handling easier, e.g.:
- get next linked PDU
- get last linked PDU
- link one PDU to another
- link PDU at the end
- release all linked PDUs (except for 1st)
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This function is the same as lll_adv_pdu_alloc except it also allocates
extra data at the end - it can just use lll_adv_pdu_alloc call to avoid
extensive c&p.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds helper to always allocate advertising PDU either from memory
pool or pdu_free queue and does not reuse existing PDU in adv_pdu.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Advertising channel packets do not have MIC, there's no need to have
extra parameter which always has to be set to 0 anyway.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This commit updates the NS board variant from
`nrf9160dk_nrf9160ns` to `nrf9160dk_nrf9160_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit updates the NS board variant from
`nrf5340dk_nrf5340_cpuappns` to `nrf5340dk_nrf5340_cpuapp_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
