Microchip MCP7940N is a Real-Time Clock/Calendar. It operates on a I2C
bus. It can be used to set a calendar time and has two alarm channels.
When an alarm is asserted the state of the MPF pin of the MCP7940N will
change (depending on gpio active high/active low setting) to trigger an
interrupt.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
This reverts commit 40a5cf6016. Debug
information is no longer necessary as doc-publish workflow is now
working correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Atmel sam0 sercom[uart] pinctrl bindings and implements pinctrl at
driver level. It changes all sam0 boards to use new feature and remove
pinmux driver dependency for sercom[uart]. The samples that require a
binding were update to keep consistency and avoid errors.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Introduce soc_port common functions. The sam0 pinmux driver was
refactored to use soc_port_pinmux_set common function.
This create the common base to implement sam0 pinctrl functions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Adds support for PWM LEDs (red, green, blue) to the mimxrt685_evk board
by adding devicetree nodes and aliases, and configuring the associated
pinmuxes. The red PWM LED is disabled by default because it's connected
to the same PWM channel as the blue PWM LED.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enable debug mode and disable quiet option. It should help diagnosing
AWS S3 problems. Some prints have also been added to spot potential
problems.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
`github.event.workflow_run.head_branch` contains the actual release tag
on releases, so it is required. It does not affect the publication of
"latest".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add old APIs marked as deprecated. The API keep the same behavior as
before, so external users have time to migrate their codebase.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Explain device busy API name changes and provide an equivalence list to
ease migration.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Busy check APIs now return boolean type. Due to that change, the
function names have also been adjusted. The common name pattern for
boolean check type APIs is "PREFIX_is_CONDITION". For example,
"pm_device_is_busy". pm_device_busy_check has been renamed to
pm_device_is_busy and pm_device_any_busy_check to pm_device_is_any_busy.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Use an enum for the available flags
- Use ATOMIC_DEFINE macro to declare the flag bit field
- Improve naming
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The test_dummy_device test has nothing to do with device busy testing,
so remove the calls to pm_device_busy_set/pm_device_busy_clear.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Publish action has been refactored into a workflow_run based action.
The action is now triggered after a successful doc-build workflow run
(only on main/release branches). The artifacts are downloaded from the
build run and published accordingly. Publish code has been simplified a
bit and PDF upload has been added.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Artifacts will be required for the publish workflow, so do not let the
build workflow succeed without them being uploaded correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Storing west version in a single place avoids keeping duplicates in each
job. Also added a note on why pinning version is important: west
docstrings are extracted from the installed version.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The pip cache should be discarded if any of the required dependencies
changes, so use the hash of the requirements file as a key source.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
xz compression reduces the html archive sice from ~350MB to ~90MB (at
the cost of more compression time). Compression has been moved to a
separate step.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow to override latexmk options via Makefile. Defaults match those in
the CMakeLists.txt.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some devicetre overlays do not reflect the recent rename to make NS
variants of boards with TF-M support have more consistent names; fix
it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
TI recently released a new version of the HDC2080 datasheet, which
slightly update the temperature conversion formula, with a temperature
offset of -40.5°C instead of -40°C. Adjust the code accordingly.
In addition the datasheet also describes a voltage dependent
compensation of -0.08°C/V above 1.8V, however it's not something easily
doable with the current sensor framework, so just ignore that part.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some STM32 series (l0, g0, f0) needs to enable clock of
DBGMCU peripheral, before accessing registers
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Microchip HAL update used by MEC152x projects with eSPI
definition changes. Remove hack from XEC ESPI driver since
the missing symbol is in the HAL.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The STM32 G0, G4, H7, L0, L4, WB and WL series have hardware support for
oversampling. This patch adds support for it, using the oversampling
value provided in the adc sequence. The result is shifted right
accordingly to not change the resolution of the measured value, like it
is done on other ADC drivers.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds the configuration to pass the testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f103rb board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass tes testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f207zg board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
