Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Enable USB device support because the board uses
CDC ACM UART for console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Change sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node and cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart nodes.
Rework CDC ACM and HID samples to get CDC ACM UART device
from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add hidden Kconfig option to Kconfig.cdc and allow
to configure CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Current USB device controller drivers (drivers/usb/device)
do not use DEVICE_DT_GET but the properties from devicetree,
and USB device controller node is parent for CDC ACM UART and
AUDIO children nodes.
Add USB device controller binding and node to keep the samples
building for native_posix driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add zephyr_udc0 (USB device controller) nodelabel to
specific USB node to allow generic USB samples to be build.
Follow up on commit e4f89478
("boards: add zephyr_udc0 nodelabel to all boards with USB support")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This adds an example application for the TI INA219 Zero-Drift,
Bidirectional Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This adds support for the TI INA219 Zero-Drift, Bidirectional
Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This commit adds support for the Legend 3.5" board revision.
This board revision is found on the Seagate FireCuda Gaming
Hub and Gaming Drive Hub for Xbox devices. It contains the following
hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
- A PWM LED connected on TIM3 CH3
- An external 24 MHz oscillator
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This commit adds support for the Legend 2.5" boards (legend25_ssd and
legend25_hdd) based on the STM32F070CB MCU. These boards can be found in
the Seagate FireCuda Gaming Drive, Gaming Drive for Xbox, SSD Gaming
Drive for Xbox, and Gaming Drive for PlayStation devices. Both boards
contain the following hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
The Legend 2.5" HDD board also contains an activity LED connected on
TIM3 CH3
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Like the first instance of the dma in the stm32l3xx soc,
the second DMA instance of the stm32f373 is of the same type
V2bis (dma request is fixed (no dma-slot).
The dma-cell has channel and config.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Simplify implementation that clears extended scan response
data by moving the length check after the new PDU buffer
has been correctly initialized.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add check to validate PHY value in the Auxiliary Pointer
structure in the common extended header format.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The bt_sdp_get_add_proto_param is used to get the protocol
parameter from Additional Protocol Descriptor List.
In order to implement it, one parameter
(proto_profile_index) is added to sdp_get_uuid_data_index
to get the indexed item.
Fix one bug in sdp_get_uuid_data because there may be more
than 2 consequent "seq len item".
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
ARC MWDT doesn't support building Zephyr as an native
application (CONFIG_NATIVE_APPLICATION).
ARC MWDT doesn't support building with CONFIG_NEWLIB_LIBC
as it doesn't have newlib.
Let's explicitly forbid to use these Kconfig options for the
MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Fix include path of headers provided by MWDT toolchain for the
case of MWDT C/C++ lib usage.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add cpp.libcxx.arcmwdtlib to test C++ library from MWDT
toolchain (with MWDT C library)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
As of today we have libraries provided by MWDT build with
stackcheck enabled. So we have to provide dummy
_fstack, _estack to make it working.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The MWDT toolchain provides two C++ libraries. Let's use
LLVM C++ library.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The ring buffer's static declarations now declare the
ring buffer's data as __noinit, to avoid unnecessary
initialization of the buffer.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The scanner should not cause a device to crash or malfunction
if invalid packets are received.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
When using both test-only and retry-failed flags, all tests would be
added to the test queue regardless if they failed or not. This commit
updates the logic to process test-only runs similar as other runs,
by adding tests to the queue with the 'run' operation directly.
Signed-off-by: Andreas Vibeto <andreas.vibeto@nordicsemi.no>
Now that the infrastructure we need is in place, we can allow every
element of DTS_ROOT to have its own dts/bindings/vendor-prefixes.txt
file instead of just special-casing ZEPHYR_BASE (which is always in
DTS_ROOT).
This treats all modules equally and eases out of tree management of
downstream-specific vendor prefixes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
