* Assumes that the USB2_OTG peripheral is being used in FS mode, as on
the NUCLEO-H743/753.
* Disable ULPI on USB2_OTFG, enable FS clk.
* Enable USB voltage detect and disable USB reg, per STM app notes.
Signed-off-by: Jeremy Wood <jeremy@bcdevices.com>
All IPSO objects that utilized the non-standard timestamp extension now
implement their model in version 1.1, which contains the Timestamp
resource. As it's no longer needed to add timestamp in a non-standard
way, simply remove LWM2M_IPSO_TIMESTAMP_EXTENSIONS option.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update IPSO Pressure Sensor object implementation to support object
model version 1.1.
Add missing optional resources for the object model version 1.0.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some of the objects redefined reusable resources IDs, while others used
a common header which defines resource IDs. Unify the approach and use
the header in every object.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Each object now have to specify the object version it implements.
Based on this information the LwM2M engine can decide whether it's
needed to report the object version during Registration/Discovery
operations or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
k_work_schedule() is supposed to be a no-op if the work item is
already scheduled or submitted: the previous schedule is left
unchanged. The check incorrectly inhibited the schedule operation
when the work item was neither scheduled nor submitted, but was
running.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move the top-level Makefile to the documentation folder as it is only
used for documentation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Sphinx supports parallelized build (-j) option. Setting it to `auto`
makes use of all available cores. This option seems to speed up the
build significantly on multi-core machines.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
checkpatch requires a Makefile to be present at the top-level directory.
Remove this requirement.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This sample is a bit messy; clean it up.
Remove unused includes, add missing include guards, clean up the
separation of responsibilities between main.c and the button and LED
helper files by moving code around, and replace the now-outmoded
device_get_binding() calls with GPIO_DT_SPEC_GET().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Drop device_get_binding() for microbit, using a gpio_dt_spec instead.
Rename the 'button' global to 'button_work' since it's a k_work
related to the button and does not actually represent the button
itself.
Fix a typo in the docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Save a bit more SRAM on bbc_microbit by tuning some Kconfigs.
Mark some arrays const to try to avoid stack allocating them while
we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use DEVICE_DT_GET on the chosen node directly.
The only in-tree board using the Kconfig option is rv32m1_vega_ri5cy.
It already sets the chosen node in the application overlay, albeit
incorrectly, so just fix it there and remove the now-redundant Kconfig
setting. That in turn triggers other build errors for this board, but
they don't seem to be related to this sample.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use DEVICE_DT_GET_ANY instead of hard-coding a device label property.
As far as I can tell from in-tree drivers, "TEMP_0" is nRF specific
and refers to nodes with compatible "nordic,nrf-temp", so use that and
clean up the driver Kconfig while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This allows RST documentation to do something like this:
See :dtcompatible:`vnd,foo` for more information.
This is transformed into a link to documentation for the "vnd,foo"
compatible.
Some devicetree compatibles may be handled by multiple bindings.
This can happen when the binding file is bus-dependent. Therefore, to
make this work, we need to change the way gen_devicetree_rest.py works
to ensure we have a good source of information for this compatible
regardless of how many bindings are associated with as follows:
- When only a single binding is associated with a compatible, the
:dtcompatible: link goes directly to the per-binding HTML page.
- When multiple bindings are associated with a compatible, this goes
to a new generated "disambiguation" page which links to all the
per-binding pages.
To avoid clashes, we stick the disambiguation pages into a
compatibles/ subdirectory of the generated bindings index root
directory.
Also reorganize the generated bindings output directory into
.../bindings/subdir/binding.rst files. For example,
dts/bindings/arm/arm,dtcm.yaml now gets its generated content in
.../bindings/arm/arm,dtcm.rst.
This brings the 'category' of binding (like 'sensor', 'i2c', etc.)
into the URL, which is a useful hint.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a helper which allows you to skip the intricacies of instance
numbers to express the intent of "give me a random enabled node with
this compatible; I don't care which one".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Our description of 'compat' parameters is all over the place.
Make it consistent by picking one.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The NRF UARTE has an undocumented feature that when you flush the RX
FIFO, the RXAMOUNT register is not cleared to zero if the FIFO is in
fact empty. This fix is correcting something that was most likely a
typo.
Signed-off-by: Petri Oksanen <petri@iote.ai>
Add validation of the case when package buffer is not aligned to
CBPRINTF_PACKAGE_ALIGNMENT.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended test to validate case when package buffer is not aligned to
CBPRINTF_PACKAGE_ALIGNMENT.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Unified define used for handling sparc case in static and
runtime packaging. Reworked macro for storing argument in
static packaging.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added parameter to CBPRINTF_STATIC_PACKAGE which indicates buffer
alignment offset compared to CBPRINTF_PACKAGE_ALIGNMENT. When offset
is set to 0, macro assumes that input buffer is aligned to
CBPRINTF_PACKAGE_ALIGNMENT. When offset is positive, macro assumes
that buffer address is shifted by given number of bytes to
CBPRINTF_PACKAGE_ALIGNMENT alignment.
Extended cbprintf_package to use len argument as alignment offset
indicator when calculating length only (package pointer is null).
Features are not available for xtensa platform which seems to
require 16 byte alignment from the package. It is only an assumption
due to lack of the documentation and may be fixed in the future.
Feature allows to avoid unnecessary padding when package is part of
a message and preceeded by a header of a known size. For example,
message header on 32 bit architecture has 12 bytes, long doubles are
not used so cbprintf requires 8 byte alignment. Without alignment
offset indicator, package containing just a string with one argument
would need 4 byte padding after the header and 4 byte padding after
the package. Message would be 32 bytes long. With alignment offset
indication both paddings are not needed and message is only 24 bytes
long.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
XCC does not support using the deprecated attribute for enum
as it is based on old GCC 4.2. So nullify the macro to avoid
compilation errors.
Fixes#33548
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
