Configures the adafruit_2_8_tft_touch_v2 shield board to enable SDMMC by
default when disk drivers are enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The device tree overlay for the adafruit_2_8_tft_touch_v2 shield board
was incorrectly mapping the Arduino D4 pin, used for SDMMC chip select.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
On the FRDM-K64F board the SoC uses the 100 pin LQFP package version of
the SoC (MK64FN1M0VLL12). This pacakge doesn't pin out PTA28 or PTC19.
So remove setting them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Write Protect pin of the internal SPI flash can be controlled by
WP_IF bit in DEV_CTL4 register. Add functions to set/get the status of
WP pin.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Change-Id: I8a0ce131f006f919a3b38a65722d0d312314ff0a
The system include directory might include spaces on windows, so quote
it.
Partially part of fix for #32111
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initially the flexspi device only supported a flash driver for
external NOR flash. As the controller supports HyperBus devices,
which can be either volatile or non-volatile, the driver iss moved
to drivers/memc.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adds a Kconfig option to set the minimum key size accepted
by this device. This can be used to e.g. enforce 128-bit keys.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
New STM32F3 Discovery boards are shipped with different
sensors. This PR adds a new revision for the board, supporting
the new acceloremeter/magnetometer sensor.
Signed-off-by: Jonathan Hahn <Jonathan.Hahn@t-online.de>
The adc1 of the stm32f373 uses an address space and a bus that are
different from the other microncontrollers of the f3 family. So, let's
remove the adc1 node from the stm32f3.dtsi and add it directly, with
respective correct values, in each of the SoC variant files.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
We are now in the process of extracting edtlib and dtlib into a
standalone source code library that we intend to share with other
projects.
Links related to the work making this standalone:
https://pypi.org/project/devicetree/https://python-devicetree.readthedocs.io/en/latest/https://github.com/zephyrproject-rtos/python-devicetree
This standalone repo includes the same features as what we have in
Zephyr, but in its own 'devicetree' python package with PyPI
integration, etc.
To avoid making this a hard fork, move the code that's being made
standalone around in Zephyr into a new scripts/dts/python-devicetree
subdirectory, and handle the package and sys.path changes in the
various places in the tree that use it.
From now on, it will be possible to update the standalone repository
by just recursively copying scripts/dts/python-devicetree's contents
into it and committing the results.
This is an interim step; do NOT 'pip install devicetree' yet.
The code in the zephyr repository is still the canonical location.
(In the long term, people will get the devicetree package from PyPI
just like they do the 'yaml' package today, but that won't happen for
the foreseeable future.)
This commit is purely intended to avoid a hard fork for the standalone
code, and no functional changes besides the package structure and
location of the code itself are expected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The file is only really used on STM32 SoCs so we can move the contents
that are relevant into pinmux_stm32.h and remove the file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add information to documentation how to monitor and capture
received and sent network traffic.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_l2_send() function which will be called by each L2
sending function so that we can catch all the network packets
that are being sent. Some L2 layers send things a bit differently,
so in those cases call the net_capture_send() directly by the L2
layer.
Add network packet capture call in receive side after the pkt has
been received by the RX queue handler. This avoids calling the
net_capture_send() from ISR context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add an overlay-capture.conf file that can be used to allow network
packet capturing in this sample app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A simple application that allows you to use net-shell to
configure network packet capturing. The captured packets are
sent to external systems for processing. This can be used
for debugging network protocols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net mem" command did not print external net_pkt slabs
properly (the number of free net_pkt's was not printed).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Show detailed information about network interface that is down,
only when user asks such information about one specific network
interface. This means that for "net iface" command only
"Interface is down." is printed but the command "net iface 1"
will print detailed information even if interface is down.
This helps to view the information and user does not need
to bring interface up to see the details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add infrastructure to allow user to configure the system so that
all the network packets, that are sent to or received from a specific
network interface, are sent to remote system for analysis.
The captured network packets are placed as a payload in UDP packet,
which is then sent inside a tunnel to a remote host. The host can
then receive the packets and for example show them in wireshark.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add get/set helpers to store information whether the net_pkt
is captured already or not. This bit is used to detect capture
loop and avoid recursion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of forcing net_pkt_clone() use the tx_pkts slab, use
the same slab that was used when allocating the original net_pkt.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPIP tunnel capability bit helps to detect which network
interface supports IPIP tunneling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shared data can't live on thread stacks if they are incoherent. These
are all just per-test-case data, so make them static.
Fixes#33898
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Usually, GCC builtin or arch-specific atomic functions are being
used. The corresponding kconfigs are "selected" by architecture
or SoC kconfigs. CONFIG_ATOMIC_OPERATIONS_C is usually used to
override the GCC built-in or arch-specific atomic functions when
these two are not supported. So change the priority of #include
so that C version is included first if selected, and skips
the inline versions of the other two variants. Or else there
will be two compiled versions of atomic functions: inline version
and the compiled C version. Note that the arch-specific version
and builtin are swapped, so the builtin one is now the default.
Fixes#33857
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The builtin atomic header file should not include the syscall
header that is generated from C version of atomic functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Xtensa cores are highly configurable so each SoC may not have
the needed instructions for the hardware assisted atomic
operations. So instead of selecting the arch-specific atomic
operations kconfig, do a "imply" instead. So SoC or board
configs can disable this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Implement SO_BINDTODEVICE socket option which allows to bind an open
socket to a particular network interface. Once bound, the socket will
only send and receive packets through that interface.
For the TX path, simply avoid overwriting the interface pointer by
net_context_bind() in case it's already bound to an interface with an
option. For the RX path, drop the packet in case the connection handler
detects that the net_context associated with that connection is bound to
a different interface that the packet origin interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Turns out that we could flatten the tree further as there is not
that many files to warrant a whole directory for this.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The STMEMSC HAL i/f requires every driver using it to define
for each instance a stmdev_ctx_t structure, which is used to
export the hardware specific APIs to handle i2c and spi busses
operations. Since this structure is bus agnostic, there is no
need to declare it twice for both i2c and spi. Instead, declare
only one structure, which will be populated either with i2c APIs
or with spi APIs according to where that particular instance is
declared inside the DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Make use of the stmemsc i2c/spi read/write routine that
has been introduced to simplify the ST sensor drivers code.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add common i2c/spi read/write routines for the benefit of those
ST sensor drivers who make use of the stmemsc HAL i/f.
Add generic stmemsc_cfg_i2c and stmemsc_cfg_spi structures which
contains all relevant information required by i2c/spi low level
routines, such as:
- the pointer to the bus device
- the I2C slave address (if instance is on I2C bus)
- the spi_config structure (if istance is on SPI bus)
This level of abstraction allows the re-use of the i2c/spi read/write
routines among all stmemsc based sensor driver without the need to
reference the specific sensor data and or config structures.
The STMEMSC HAL source code is located here:
zephyrproject-rtos/modules/hal/st/sensor/stmemsc/
Signed-off-by: Armando Visconti <armando.visconti@st.com>
soc/arm/st_stm32/CMakeLists.txt already has a
zephyr_include_directories(common) so including in again
soc/arm/st_stm32/common/CMakeLists.txt is redudant.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
An option has been added which can be passed to setsockopt
which allows the user to set & get the dtls handshake timeout,
either before first handshake or online.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
CMSIS_DSP and net_socket tests are either too
slow or too large for this platform, also drop
bluetooth for test
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Remove dead code from twisterlib.py which is a copy of code
from twister script. This redundancy causes pylint errors in
compliance checks.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Enable half transfer interrupt of the dma controller
in case the channel was enabled in circular mode.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
The usage of EXTRA_DTC_FLAGS was removed in commit
269f350487
If ninja was used and e.g. menuconfig is called, when more than one
element is in EXTRA_DTC_FLAGS, calling "ninja menuconfig" failed.
E.g.
west build -b lpcxpresso55s28_ns -t menuconfig samples/hello_world
resulted in and error. This is fixed with this commit.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
After 3a58b45ced introduced the option
of specifying valid board revisions, it is no longer needed to provide
a .conf file for each revision. Remove then the files that were added
solely for this reason and use the VALID_REVISIONS parameter instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
On stm32, the M bits defines the length of the frame between the start
bit and the stop bit, eventually including the parity bit when enabled.
Fix configuration of databits to set correct M bits when parity is
enabled.
This commit tries to address issue zephyrproject-rtos/zephyr#33351
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
STM32L011 and STM32L031 do not support USART1.
This commit moves the definition of the node to only
be present for MCUs which support the peripheral.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
TIM7 peripheral was defined for all STM32L4 chips
in the device tree when not every chip supports it.
This commit moves the node so that only chips
which support the peripheral have the node defined.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
The device tree includes CAN node can1 for all
STM32L4 chips when in fact they don't all support it.
This affects STM32L412xx and STM32L422xx.
Fixes#33896
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
