Pinmux should no longer happen in board C files since the addition of
the pinctrl API, so remove such guidelines from the board porting
guidelines.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This includes a basic driver for built-in flash on the Texas Intruments
SimpleLink CC13xx/CC26xx SoC series.
The driver makes use of driverlib HAL from TI's SDK and was tested on
two LaunchXL development boards with CC1352R and CC2652R SoCs:
- CC1352R1 LaunchXL
- CC26x2R1 LaunchXL
Tests were done using:
- flash shell sample (samples/drivers/flash_shell)
- littlefs filesystem sample (samples/subsys/fs/littlefs)*
- MCUboot (bootloader/mcuboot/boot/zephyr)*
* additional changes in DTS for the boards were required (partitions
table) and are not part of this changeset (will be introduced later)
Some additional information about the implementation:
1. TI's Technical Reference Manual for CC13x2 and CC26x2 points out that
"An individual 64-bit word can be programmed to change bits 1 to 0"
but it seems this 'alignment' requirement is handled internally by
the ROM function and thus 'write-block-size' is set to 1.
2. Interrupts, VIMS and line buffers are disabled during flash content
update (write or erase) and restored afterwards as recommended by TI.
3. Only RAM to flash write is supported (source of data to be written to
flash can't point to flash).
4. The driver doesn't take care of flash sector protection disable as
that functionality is handled by CCFG. Write or erase requests which
refer to a protected area will fail.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This includes DTS bindings for the Texas Instruments CC13xx/CC26xx flash
controller driver and adds support for it in CC1352R and CC2652R SoCs
DTS files.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
The name change for cavstool.py has also broken the backward
compatibility for SOF testing. Rename cavstool_server.py back
to cavstool.py. Keep the functionality still as same as the previous
one.
And also update the documentation of it.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
The new client-server-based cavstool has broken the SOF CI testing
due to not considering that loading firmware and output log directly
without daemon is still necessary. Fix that when it is not running
as a daemon.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
For the error codes used only in __ASSERT() statements fix compilation
warnings like:
...
warning: variable 'err' set but not used [-Wunused-but-set-variable]
int err;
^
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
ehl_crb supports HPET timer by default. Add test suite to test APIC
timer's TSC deadline mode on ehl_crb.
Signed-off-by: Yinfang Wang <yinfang.wang@intel.com>
Coverity reported unused value for a variable "ret" in the function
send_socket_data(). Indeed there were two subsequent assignments
to "ret", meaning that the first one was unused.
The root cause of the problem is not checking the value of "ret"
after correctly invoking a function within send_socket_data(). Fix
this by adding appropriate checks.
Coverity-CID: 215249
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Check if there are multiple non-empty data fragments passed to sendmsg()
function. If positive, then set EMSGSIZE errno and return -1, as that case
is not handled properly with current implementation.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
If one data fragment was not sent successfully in sendmsg(), then
attempting to send the rest does not make any sense, as it would introduce
hole in data stream.
Currently if one fragment was not sent successfully, then there is a
'break' in inner loop, but that moves the execution to sending the
following data fragments.
Return early in case of fragment sending failure, so that there are no more
send attempts.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Pin the types-PyYAML version to 6.0.7. Version 6.0.8 is causing CI
errors for other pull requests, so we need this in to get other PRs
moving.
Fixes: #46286
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
added user_data field to modem_cmd_handler_data
this allows for multiple instances of modem drivers which use
the modem cmd handler. currently, the only identifiable
parameter passed to the modem command handlers is the
modem_cmd_handler_data struct.
The added user_data variable allows for the a modem driver to
pass its dev or data pointer to the modem_cmd_handler_data
struct to be retrieved from within the modem command callbacks.
Signed-off-by: Bjarki AA <baa@trackunit.com>
All drivers using 'modem_pin' abstraction were converted already, so remove
its implementation now.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move away from 'modem_pin' abstraction as it has not obvious value compared
to generic 'gpio_dt_spec'.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move away from 'modem_pin' abstraction as it has not obvious value compared
to generic 'gpio_dt_spec'.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move away from 'modem_pin' abstraction as it has not obvious value compared
to generic 'gpio_dt_spec'.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move away from 'modem_pin' abstraction as it has not obvious value compared
to generic 'gpio_dt_spec'.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
UART device pointer is already used directly when configuring modem
interface. Convert the case when UART is reconfigured when 'target-speed'
DT property is specified.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This commit updates the references to the documentation pages that were
relocated in the PR #41154.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Json library parser modify data so thats why we can't parse same
data again. Now Composite observation handler parse SenML Json or
CBOR resource path which is given to new API composite Read API
which not need any new data parser.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Integrated updated JSON library to LwM2M 1.0 JSON.
Removed Old Json format default choice.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Integrated updated JSON library to SenML-JSON.
This integrate affect that Coap Block wise transfer is not
supported.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
New Types:
* Added support for Generic Numeric type (float, 64-bit)
* Added support for Opaque string type.
* Added support parse Array data in object for seprate array parsing
New API for Json Array parsing Object 1 by 1:
* json_arr_separate_object_parse_init() init array parse
* json_arr_separate_parse_object() Parsing 1 Json Object
Rename token and lexer structures and publish those.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
The commit fixes issue where image management would switch to using
heap, whether developer wanted or not, when CONFIG_HEAP_MEM_POOL
gets value greater than zero.
Now when heap is enabled the user can select whether image management
will keep on using static variable, taking static RAM, or will use
heap to allocate the flash image context only when needed.
For this purpose CONFIG_IMG_MGMT_USE_HEAP_FOR_FLASH_IMG_CONTEXT
has been added, which is available when CONFIG_HEAP_MEM_POOL is enabled.
Fixes#44214
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The open source controller did not expose support for shutting it down
via the close() API in the HCI driver. Add support for it, which
completes the support for disabling and enabling the Bluetooth stack in
Zephyr.
Closes#3192.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Allow the controller to be deinitialized, adding the whole chain of
calls:
- ll_deinit()
- lll_deinit()
- lll_clock_deinit()
in order to be able to turn everything off, including the controller's
refcount of the LF clock.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When bt_disable() was introduced, some of the global variables that
handle key aspects of Bluetooth were not converted to be also
re-initialized every time that the stack was disabled and the enabled
again. This meant that the FIFO and semaphore in the device structure
were not reset whenever the corresponding threads using them were shut
down and then restarted.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit replaces the Zephyr logo for the PDF documentations with
the new registered trademark version.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit replaces the Zephyr logo for the HTML documentations with
the new registered trademark version.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit replaces the Zephyr logo for the README page with the new
registered trademark version.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The 1060 EVK board page links have changed. Update the
documentation to point to the correct links.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fixes following warning during compilation with llvm:
...
lib/os/mpsc_pbuf.c:428:8: warning: variable 'wrap' set but not used
[-Wunused-but-set-variable]
bool wrap;
^
1 warning generated.
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
