Instead of depending on the nRF5340 DK, use a path specific to just
the nRF5340 SoC and get the size of the external flash in this case
from devicetree so that the sample could be easily run on other boards
based on the nRF5340 SoC (after just adding proper overlays).
On the occasion, correct the attributes of the EXTFLASH memory region.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the Nordic QSPI NOR flash driver instead of the specific code
for the nRF5340 DK to initialize the external flash chip for XIP.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit adds tests for the newly added list len APIs to the
corresponding test cases. It is noted that the test functions calculate
equivalent values manually using several different internal list
functions. This has been left unmodified to ensure that the manual ways
using each of the various for_each functions results in the same value
as the new list_len() functions.
Signed-off-by: J M <montytyper@msn.com>
This commit adds functions to slist, sflist, and dlist to return the
length of provided lists, which will allow future commits to refactor
code that implements this manually.
The new functions all take a reference to any node in the list and compute
the length of the entire list. If the list is empty, they return 0.
Signed-off-by: J M <montytyper@msn.com>
Fixes: #62589
Follow-up: #60031
The PR #60031 moved CMake code to new folder location causing generated
library names to change.
This change impacted the use of those libraries in the Zephyr armlink
CMake code, causing CMake failures at configure time.
This PR fixes this failure by updating the armlink CMake code to use
the new library names.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fix another i2c_dump_msgs_rw:
/drivers/fuel_gauge/bq27z746/emul_bq27z746.c:282:26: warning: passing
argument 1 of ‘i2c_dump_msgs_rw’ from incompatible pointer type
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Added PWM outputs to arduino header, to make testing PWM support with
this EVK simpler. These PWM outputs are enabled by the pwm_api test,
although they are not used. The user can enable the PWM shell in order
to test these PWM outputs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit instructs mbedtls to use 64-bit alignment in its internal
memory allocation routines when targeting 64-bit platforms. By default
mbedtls uses 32-bit alignment regardless the platform, what may result
in misaligned memory accesses, possibly inducing access time overhead or
exceptions
Signed-off-by: Vladimir Graudt <vladimir.graudt@syntacore.com>
Add a test for the Microchip MEC172x SPI driver using the
mec172xevb_assy6906 board with an external SPI dongle.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Zephyr version 3.4 changed the SPI context structure and macros
which broke the logic in the MEC172x SPI driver configuration API.
This was not detected by CI due to no tests for this driver are in
the tree. The driver now behaves like most other SPI drivers requiring
a different configuration structure pointer to be passed if any item
in the configuration changes.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Enable PM on STM32 entropy driver.
Only supports PM_DEVICE for now, runtime support will be added later.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Regulator voltage setting is not applied if the device output
is already configured for the requested voltage.
This change is needed to ensure correct device behaviour.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
This change brings in support for setting various Wi-Fi modes and
enables a specific Wi-Fi interface to be also placed into a sniffer
operation via monitor mode and promiscuous mode. A raw TX- packet
Injection mode is also introduced
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
LLVM LLD fills empty spaces (created using ALIGN() or moving the
location counter) in executable segments with TrapInstr pattern,
e.g. for ARM the TrapInstr pattern is 0xd4d4d4d4. GNU LD fills
empty spaces with 0x00 pattern.
We may want to have some section (e.g. rom_start) filled with 0x00,
e.g. because MCU can interpret the pattern as a configuration data.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
While the existing named sections were nice and to the point, it is
better to also document each function separately.
Also mounted this utility header under the "Utilities" doxygen group.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
According to the reference manual the overdrive should be enabled after
setup of the sysclock (HSE or HSI) and enabling the PLL (PLLON).
The flash latency should be enabled after the PLL has been turned on,
but before switching the system clock to the PLL.
Signed-off-by: Max van Kessel <max_van_kessel@msn.com>
After 31767a0bc there is no need to disable boot banner because
initial clock state is read in POST_KERNEL stage before the boot
banner is printed.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Key combinations described using the sphinx :kbd: role should not have
a white space around + sign
i.e. should be :kbd:`Ctrl+d` not :kbd:`Ctrl + d`
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds a zephyr,lvgl-encoder-input compatible to the native_posix board
overlay and the required code to control an arc widget.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Add a pseudo device which can be used to hook into qdec events and
optionally a button and relay the input_event to lvgl.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
If pylib twister harness reads bytes that can't be decoded to Unicode,
it would raise an exception at a separate "serial reader" process, that
would fail without any warning.
This patch uses "errors='replace'" parameter for Python str.decode()
method, so that this doesn't happen.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
This commit separates kernel_arch_func.h into two header file,
'cortex_a_r/kernel_arch_func.h' and 'cortex_m/kernel_arch_func.h', it
also removes some functions which is empty.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
This commit separates cpu_idle.S into two asm files,
'cortex_a_r/cpu_idle.S' and 'cortex_m/cpu_idle.S'.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
This commit separates thread.c into two source files,
'cortex_a_r/thread.c' and 'cortex_m/thread.c, it also introduces some
changes.
1. Migrate 'thread.c' and 'cortex_m/thread.c'.
2. Migrate 'thread.c' and 'cortex_a_r/thread.c'
3. Remove the 'z_arm_mpu_stack_guard_and_fpu_adjust' function as this is
obviously written for Cortex-M architecture.
4. Remove the 'z_arm_prepare_switch_to_main' function as this is only
used by Cortex-M architecture.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
This commit Separate 'prep_c.c' into two file based on the architecture,
one is 'cortex_m/prep_c.c', the other is 'cortex_a_r/prep_c.c'
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
This commit Separate exc.h into two header files, 'cortex_a_r/exc.h' and
'cortex_m/exc.h'. Still, keep 'exc.h' so that we don't need to change
other files which include it.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
