To be able to get a tokenize DT string without the quotes. Deprecate
also DT_ENUM_TOKEN and DT_ENUM_UPPER_TOKEN.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This reverts commit 9e58a1e475.
This change is in conflict with commit 94f7ed356f ("drivers: serial:
add a dummy driver for vnd,serial"). As a result two equal serial
devices are defines, resulting in link error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Fix a couple of issues related to Power Management:
1. A build error because 'dev' was used even if not declared
in the caller routine scope
2. The lis2mdl power management init specific routine was
not declared in in the device instance definition
Signed-off-by: Armando Visconti <armando.visconti@st.com>
So far modem API used UART device names / labels. Change API to operate
on device pointers instead, so that we stop using device_get_binding()
in modem core and in some DT compatible modem drivers.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Serial device is needed for building drivers that use DEVICE_DT_GET().
None of the currently used modem drivers use that right now, but this is
about to change.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add DEVICE_DT_GET_ONE() macro. This macro is similar to
DEVICE_DT_GET_ANY() but instead of returning NULL if no enabled,
compatible device instance is found, it throws a compilation error.
This is useful for compile-time checks in samples.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The openthread has enhanced features for periodic parent search,
this commit adds kconfig options to enable and configure these.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The Bluetooth 5.3 specification was recently released, and
has a new version identifier (12) assigned to it in the
Bluetooth Assigned Numbers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a link to best practices about copyright notices and when to and
when not to change them or add them.
Fixes#6777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the content in the default index is HTML only, so create an
index just for PDF and keep it clean.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the symbol name on top and in the page title. This will enhance
search results and adds a missing page header that is needed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Right now the kconfig index is randomly placed in the guides. This is a
table similar to other indeces we have and should be considered as part
of an appendix rather than place it in the middle of the documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When stopping the interface, also abort the RX routine and enable RF
power saving. Will re-start RX on iface start.
Also fixed a bug with `cmd_fs` crashing at RF wakeup because `rf_mode`
was allocated on stack.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
This is useful if the user wants to set specific latexmk options, e.g.
-quiet for CI.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Sphinx automatically generates a Makefile/make.bat that allows to build
the LaTeX output. This converts the CMake `pdf` target into a shim to
this Makefile, making the solution more future-proof if Sphinx decides
to change something.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The extension was not evaluating the GENERATE_HTML option correctly. The
get_doxygen_option returns a `List[str]`, not a `str`.
This effectively means that the Zephyr apidoc has not been updated for a
while as the extension was not moving the output to the final
destination folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
CRC16 was removed by simply decreasing length of the last fragment by 2.
This worked as long as last fragment was longer than 1 byte. If not,
then last fragment was corrupted (its length ended up being 65535),
leading to undefined behavior.
Fix CRC16 removal by utilizing recently introduced
net_pkt_remove_tail(), that properly handles multiple fragments.
Reported-by: Jim Paris <jim@jim.sh>
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Introduce a helper function for being able to remove any arbitrary
length from tail of packet. This is handy in cases when removing
unneeded data, like CRC once it was verified.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
If a write offset isn't a multiple of the nor page size, and the
length is too large to fit within a single page, it could wrap around
in that page.
Tested on i.MX RT1064 internal flash using NVS settings
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit enables true rng for nucleo_f207zg platform. This has been
tested with tests/drivers/entropy/api and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
replace custom crc8 with sys/crc8
use sys_put/sys_get helpers for byteorder specific operations
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add driver for sensirion consumer humidity sensor line.
Supports shtc1 and shtc3, but only shtc3 is tested.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Instead of waiting forever for the SPI transfer to complete, let's use
a timeout value and bail out if elapsed. The timeout value logic is,
xfer_len/frequency + tolerance
Tolerance value can be modified using a Kconfig symbol,
CONFIG_SPI_COMPLETION_TIMEOUT_TOLERANCE. It defaults to 200ms.
Fixes: #33192
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There was an issue with wrong length of CTE send in connectionless
mode, with periodic advertising PDUs. Radio peripheral was not
configured to send CTE with correct length while PDU had CTEInfo
field informing receiver that CTE is attached to the PDU.
Source of the problem was in ll_df_set_cl_cte_tx_enable function.
Order of parameters in ull_adv_sync_pdu_alloc was wrong.
ULL_ADV_PDU_HDR_FIELD_CTE_INFO was speficed as hdr_rem_fields.
Because of that extra_data, memory used to provide CTE configuration
to LLL, was not allocated. PDU content is prepared in ULL, so CTEInfo
field included correct information, while Radio was never configured
by LLL to send CTE.
ull_adv_sync_extra_data_set_clear received a pointer to hdr_data,
instead of a direct pointer to df_cfg structure. When extra_data
was allocated correclty, wrong CTE configuration was provided
copied there and LLL received invalid CTE length. It was different
than the length in PDUs CTEInfo field.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
According to spec we should ignore messages with incorrect msg size.
This patch adds a check to every opcode handler.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
```
3.7.3.4 Message error procedure
When receiving a message that is not understood by an element, it shall
ignore the message.
Note: A message can be falsely identified as a valid message, passing
the NetMIC and TransMIC authentication using a known network key and
application key even though that message was sent using different keys.
The decryption of that message using the wrong keys would result in a
message that is not understood by the element. The probability of such a
situation occurring is small but not insignificant.
A message that is not understood includes messages that have one or more
of the following conditions:
• The application opcode is unknown by the receiving element.
• The access message size for the application opcode is incorrect.
• The application parameters contain values that are currently
Prohibited.
Note: An element that sends an acknowledged message that is not
understood by a peer node will not receive any response message.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Default Voltage scaling range selection (range2)
doesn't allow to configure Max frequency
switch to range1 to match any frequency
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Default Voltage scaling range selection (range2)
doesn't allow to configure Max frequency
switch to range1 to match any frequency
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Fix macro used in g4 file to enable LSE clock.
Then, to avoid no-op configurations, generate an error
when MSI Hardware auto calibration is selected but LSE
clock is not enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This PR addresses radio signal stength measurement during
and before PPP session. The PR provides provides facility
of readout for both +CSQ and +CESQ versions depending
upon the modems. This PR follows the idea of rssi readout
of PR#35496. Additionally, reliable Cell info update
is also ensured.
Signed-off-by: Tahir Akram <mtahirbutt@hotmail.com>
Add I2C bus initial support to Renesas R-Car SoC series.
Both I2C2 & I2C4 buses are supported on R-Car H3 board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
This patch add support for I2C on the Renesas R-Car.
This I2C hardware block can be found on various Renesas R-Car
SoC series.
It allows to perfom read and write on I2C buses in an
interrupt based way on R-Car Gen3 H3ULCB board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Third generation R-Car series products have up to
seven I2C bus interfaces conformant with the
Philips Semiconductors (now NXP Semiconductors) I2C bus
(Inter-IC bus) specification.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
As a first step towards being more forgiving on invalid inputs, allow
string-valued aliases properties that do not point to valid nodes when
the user requests permissiveness.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Modeled after dtc's --force option, the idea is this will try harder
and harder over time to produce an object despite malformed input.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
