This updates k_mem_domain_add_thread() to return errors so
the application has a chance to recover.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the arch_mem_domain_*() functions to return errors.
This allows the callers a chance to recover if needed.
Note that:
() For assertions where it can bail out early without side
effects, these are converted to CHECKIF(). (Usually means
that updating of page tables or translation tables has not
been started yet.)
() Other assertions are retained to signal fatal errors during
development.
() The additional CHECKIF() are structured so that it will bail
early if possible. If errors are encountered inside a loop,
it will still continue with the loop so it works as before
this changes with assertions disabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes both k_mem_domain_add_partition() and
k_mem_domain_remove_partition() to return errors instead of
asserting when errors are encountered. This gives the application
chance to recover.
The arch_mem_domain_parition_add()/_remove() will be modified
later together with all the other arch_mem_domain_*() changes
since the architecture code for partition addition and removal
functions usually cannot be separately changed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes k_mem_domain_init() to return error values
instead of asserting when errors are encountered.
This gives applications a chance to recover if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For qemu_cortex_a53 on the mem_protect test, the test
test_mem_domain_init_fail() fails due to not having enough
translation tables. However, since ARM64 MMU asserts on such
condition, and k_mem_domain_init() also asserts when fails,
there is no way to distinguish these two assertions at runtime,
thus the test was considered passing. Fix this by allocating
a few more tables so the test will actually fail on
k_mem_domain_init().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If Kconfig SETTINGS_SHELL option is enabled, add the
following shell commands:
* settings list [subtree] - list all settings belonging to
the given subtree,
* settings read name - read a setting with the given name
and output hex dump of the value.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
For reStructuredText, continuing text in a numbered list must be aligned
to the first line.
These lines are searched by the following regex:
ag '#\. .*\n[^ #\n]' **/*.rst
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
LOG_MODULE_DECLARE was referring to power name which was renamed
to pm by faa06ac. This results in compilation failure.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Clock ISR was running 2x the frequency.
Also fixes clock_get_cycle which was returning
wrong values.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
A user may want to control message parameters (for example, delay
parameter) on every retransmission of a published message (for example,
see section 1.4.1 of the mesh model specification). This is essential
for lighting messages as time gap between messages retransmitted via
the publish-retransmit mechanism introduces unwanted jitter/pop-corn
when such retransmissions are received by a large 'group' of lights.
This commit adds an option to `struct bt_mesh_model_pub` to make the
access layer call `bt_mesh_model_pub.update` callback on every
retransmission. This also addes few macros and functions that can be
used for further calculations.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Check return value from recv() passed by usbip_recv().
Fixes: #39849Fixes: #39869
Coverity-CID: 240221
Coverity-CID: 240244
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fix issue with TFM signing of images not using the correct imgtool.
The wrapper command expects the mcuboot scripts folder to be the
current working directory when called in order to find its own
version of imgtool.
Since the command is using a different current working directory
this is not found and the system imgtool is used instead.
This causes the commands to be run with 2 different version of imgtool
if the system imgtool is found and does not have any issues.
The system imgtool could not be installed or have compatibility issues
as 1.7.2 version of imgtool is currently required by the wrapper script
Fixes: #40254
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Andes developers, kevinwang821020 and jimmyzhe as reviewers for
andes_v5 soc, board, dts, and drivers.
Remove Teng-Shih-Wei from reviewers because he doesn't maintain
Zephyr RTOS currently.
Signed-off-by: Jim Shu <cwshu@andestech.com>
This change is supposed to fix the issue of incomplete acl mtu
initialization in the absence of BREDR. Find further information here:
https://github.com/zephyrproject-rtos/zephyr/issues/39549
Signed-off-by: Tobias Scharnowski <tobias.scharnowski@rub.de>
For consistency we run the gatt and gap tests also with the new
LLCP. The test lists for legacy and new LLCP are identical
and therefor no separate test lists have been introduced
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Test is using logging in a different way and flushing logs
after each test case would not work.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When deferred mode is used, logging is using lowest priority
thread to process the logs. When test cases are performed one
by one processor never reaches lowest priority thread until
whole suite is completed. Added flushing after each test case.
Feature is optional (by default enabled).
CONFIG_TEST_LOGGING_FLUSH_AFTER_TEST=n to disable.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add function which can be used to check if there is any pending
data to process. It can be used to determine if deferred logging
has completed processing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove LOG_MINIMAL kconfig option which was confusing
since LOG_MODE_MINIMAL existed. LOG_MINIMAL was used to
force minimal mode but because of invalid dependencies
it was leading to issues.
Refactored code to use LOG_MODE_MINIMAL everywhere and
renamed LOG_MINIMAL to LOG_DEFAULT_MINIMAL which has impact
on defualt logging mode (which still can be later changed
in conf file or in menuconfig).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- refactors cache initialization functions by moving it from
soc.c and placing it in soc_cache.c
- moves SPIRAM's bss zeroing before SPIRAM initialization
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
It does not make sense to use branch coverage with macro LOG_ERR().
It is still covered with line coverage.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Increase test coverage with simulation of reading IBECC_ECC_ERROR_LOG
and IBECC_PARITY_ERROR_LOG.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This rework module hal_gigadevice to be compliance with rule
that requires firmware libraries directories names be lowercase.
This rule was created at hal_gigadevice/README and it is not
a Zephyr general rule. This only affect how hal_gigadevice is
used.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Rename the mockup file from ull_periph.c into ull_peripheral.c
so that it has the same name as its equivalent in the BT
controller
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
After removing the "type" and "dval" members, the documenation still
referred to these fields. This commit removes the paragraph
about checking the type of values returned from sensor.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
It will unlock and unhold the CS line. Note that the lock and the CS
being hold on are 2 separate config bits, so if only one is selected
spi_release() will only apply on this configuration.
Note: this has been already the case in the controller drivers, where
there implementation of spi_release() calls
spi_context_unlock_unconditionally(). And that function always forces
the CS line to an inactive state.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
replace with version.parse from packaging module.
prevent this warning message:
DeprecationWarning: The distutils package is deprecated
and slated for removal in Python 3.12. Use setuptools or
check PEP 632 for potential alternatives
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Process issues are tracked and do not need to be automatically made
stale.
Suggested-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Limit the maximum ACL Tx buffer size to 251 octets due to
implementation restricted use of uint8_t for PDU len field,
also used as the Tx buffer size data type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
