With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/canbus, subsys/net/l2/canbus, and drivers/can settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fix the limits for the timing parameter calculations.
The lower limit for the phase_seg2 value is wrongly specified as 1 to 7,
but 1U is substracted before writing it to the CTRL1:PSEG2 register
field. This results in register field values between 0 and 6, but 0 is
an invalid value for the PSEG2 register field.
The upper limits for several of the timing parameters are wrong as well,
but this does not result in invalid register field values being
calculated. It can, however, result in not being able to meet CAN timing
requirements.
The confusion in specifying the limits likely stems from the timing
calculations and timing limits using the "physical" values, whereas the
registers fields all use the "physical" value minus 1. When the
datasheet says "The valid programmable values are 1-7", the
corresponding limits should be set to 2 to 8 to take the "minus 1" into
account.
Fixes: #39541
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Update drivers regarding latest multicast group join/leave monitor
changes which now supports both IPv6 and IPv4 multicast addresses.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
IRQ_CONNECT macro last argument is architecture-specific flag,
but now there is instance id at this place.
This PR set architecture-specific flag to 0.
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
The RT1170 platform adjusted the result parameter in the callback
function to be a uint64_t. The adjustment is to conditionally change
the callback definition and then cast the result value to a size that
fits the reported values across the various SOCs.
With error results, cast result to uint64_t and modified the called
function to print a uint64_t value.
With the RX/TX status, result is a MB value that doesn't exceed 64
so the result value is cast down to a uint32_t.
Fixes#37691
Signed-off-by: David Leach <david.leach@nxp.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Before entering initialization mode, we left sleep mode, then request
to leave again sleep mode before returning from can_stm32_init() is
useless.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Disabling the time-triggered communication mode (TTCM) is done twice in
the setting of the master control register (MCR). So, let's remove the
second.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Instead of explicity ORing together the compatible drivers,
CAN_RX_TIMESTAMP now depends on CAN_HAS_RX_TIMESTAMP
which is selected by the drivers primary Kconfig option. In addition,
stm32fd does not need to select this option since it selected by
the underlying M_CAN driver.
Signed-off-by: Abram Early <abram.early@gmail.com>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This driver is for classic CAN, it makes use of CAN interface
in FIFO mode.
This driver support Standard ID as well as Extended ID.
Tested on H3ULCB, Ebisu platform, with external adapter and
in loopback mode.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Move filter match function to can_utils.h, so that it
can be reused for Renesas driver.
Preserve copyright from Karsten Koenig.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
The data-sjw value was incorrectly written to the NBTP register when it
should be written to the DBTP register.
This fixes a regression introduced by
5e0ca9b41e.
Signed-off-by: Christoph Steiger <c.steiger@lemonage.de>
If the supplied sjw in the timing parameters is zero,
the sjw parameter should not be changed.
This fixes the uninitialized swj in can_set_bitrate.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
There was a verification function for can_set_bitrate calling a syscall
implementation. But, can_set_bitrate is not a syscall and does not need
to be because it is accessing the driver through other syscalls.
Fixes#34734
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Implementation of the Bosch M_CAN IP driver.
This driver is just the base for a specific SoC implementation.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
CAN_SYNC_SEG and ts1 are in common units. Both need to be scaled by 1000
to calculate the sample point.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix coverity CID 216784.
SJW was not initialized in the tmp_res, but got copied
to the result pointer, which overwrites the value.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
socket_can_generic.h makes some assumptions that are not always valid
for various drivers with regards to numbering. To clean this up we
add defines for SOCKET_CAN_NAME_0 and SOCKET_CAN_NAME_2 in addition to
SOCKET_CAN_NAME_1.
We also move struct socket_can_context into the drivers themselves
since they know best how many CAN interfaces are getting supported and
what naming/number convention they'd have.
Additionally, this also exposes a few other build issues with the
can_mcux_flexcan driver that get fixed.
Finally, we remove the platform_allow from samples/net/sockets/can
since it is no longer needed.
Fixes#31733
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CAN_MCP2515_MAX_FILTER is not needed anymore and was probably just a
misunderstanding. Aligned it with the other CAN drivers.
This also was the last difference in the mcp2515 specific config for the
can sample, so that can be deleted as well.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Set the prescaler in register BTR according to the configured bitrate in DTS.
This bug appeared in commit 8b6c1bd4b7
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added tests for the timing algorithm.
The tests calculate timings for some bitrates with sample-points
and verify the results.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Check if the timing is not set from device tree and exclude
sample-point algorithm if it is not used from device-tree.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Reordering of the struct elements to match the Linux format.
The __packed() is not necessary anymore.
std_id and ext_id is merged to id in the frame and filter.
Additionally, the frames are ready for CAN-FD.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The previous API can't change the sampling-point and only allowed
bitrates that fit the time segments.
The new API allows for shifting the sampling-point and adjusts the
number of time quantum in a bit to all more possible bitrates.
The functions to calculate the timings are moved to the can_common file.
They can be used for all drivers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Prevoiusly there is no network interface for mcp2515 driver.
This is solved by calling the NET_DEVICE_INIT macro in mcp2515 driver.
fixes: #30432
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
Set stm32_dt_pinctrl_configure function as the unique entry point
to STM32 DT pinctrl management.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move pinctrl remap functions out of stm32f1 definition in order
to get it available to all series.
Allows use of more IS_ENABLED macros in calling drivers and make
code more readable.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adds imx rt support.
Allows n-number of can interfaces based on device-tree.
Adds a "common" irq name.
Added CAN bus pins and dts for 1060 and 1064 EVK.
Signed-off-by: Rick Talbott <rtalbott@fastmail.com>
It is necessary to wrap the device pointer into data, and pass the data
to the HAL callback function.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
