Fixes: #27375
This is a cleanup of the Zephyr CMake package export.
The code has been simplified so that the export now happens through a
CMake script. This avoids several generated CMake build files compared
to previous export mode, and thus removes the need for a CMake pristine
script.
A benefit of this cleanup is that it also fixes#27375.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This patch should improve couting and reporting of the number
of passed/skipped tests.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Sleep minimum time in RX when gPTP is enabled. Typically we
receive constant stream of gPTP protocol data so no need to
wait very long in that case and cause timeouts.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of unknown clock accuracy, set it to 1ms for native_posix
boards. This looks better in TSN monitor.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print role information next to port information. Also make
sure that port number is set correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save some memory and separate common string snippets from larger
strings. In this case "does not match" sub-string is printed by
several warning prints so separate the sub-string from the bigger
string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that native_posix Ethernet driver is claiming to support
VLAN when the VLAN functionality is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add gPTP multiport support to native_posix Ethernet driver.
This means that the driver is able to create more than one
network interface and enable gPTP to each of them. This requires
that net-tools is updated as it contains configuration file
for network interfaces in host side.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the macros CLOCK_ID_PRFX2 and CLOCK_ID_PRFX and replace them with
_CONCAT from common.h.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Added support for hardware flow control in EFM32 UART driver.
Signed-off-by: Timo Dammes <timo.dammes@lemonbeat.com>
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Return BT_HCI_ERR_INVALID_CONN_ID if an invalid handle is
given by the HCI; currently sometimes BT_HCI_ERR_CMD_DISALLOWED
is returned
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Use new KConfig switches to configure debug support.
Correct ADC configuration where all ADC pins are in ADC mode.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Currently JTAG debug is enabled by default.
In some designs is desirable to disable JTAG functionality.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Add overlay that includes only the shell transport of mcumgr, without
bringing in BLE as well. This can be used as an alternative for the
serial transport. The `smp_svr` README was updated accordingly.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
So far SMP shell transport was initialized in APPLICATION run level, but
shell over UART was initialized in POST_KERNEL. This could end up in
situation when received frames were scheduled for further processing in
SMP layer, when it was not initialized yet.
Export smp_shell_init() function declaration and call it before shell is
initialized with all its receive data handlers. This prevents situation
when data is scheduled for processing in SMP layer, when that one is not
ready yet.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Resolve a TODO item that followed the introduction of runners.yaml
files by removing the now-unused CMake cache variables that they
obsolete.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Using ZEPHYR_BOARD_FLASH_RUNNER relies on a cache variable that
happens to work but is not a supported feature. The appropriate
variable to set is simply BOARD_FLASH_RUNNER.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Avoid use of the cached_runner_config() helper, which we have a TODO
item to get rid of. Adjust the output and do some other minor
improvements.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rolling yet another parser turns out to be the best way to let west
extensions respond to Kconfig values. See source code comments in the
patch for details.
The sanitylib library has some similar functionality but it isn't
exactly the same, and it gets strings wrong. For example, that parser
can't handle this option:
CONFIG_FOO="he said \"no\" to me"
This one can, and it has a couple of other features we'll find useful
for west extensions eventually besides.
(Not to mention that sanitylib also rolled its own CMake cache parser,
which also exists in west_commands.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
Value of ret has been overwritten by flash_write_protection_set
before it could be returned from do_write_unaligned, which could
lead to reporting success when error code should have been returned.
Fixes#27641, Coverity-CID: 212142
Fixes#27642, Coverity-CID: 212143
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Variable "sd" is no longer referenced after refactoring in 2ed6b6a8ed.
It caused warning-as-error when building using sanitycheck, e.g. in CI.
This is 2nd fixed of the above refactor, after eb9a18432.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit fixes an issue when more than one USB transfer is
reserved for same OUT endpoint.
There are 2 scenarios when this could happen:
- The Host sends SET_CONFIGURATION(1) request twice.
- The Host triggers Suspend->Resume->Configured
event sequence for the device.
USB tranfers are not canceled on SUSPEND event
when the device was not configred previously.
Because of that USB transfer slot is reserved twice
for the same OUT endpoint and lead to shortage of USB
transfer slots quickly.
Without this patch CDC ACM class reserves duplicated USB
transfer slots for one transfer. The sequence of
Suspend->Resume events is genereted alongside with
Configured and the stack will shortly run out of transfer
slots.
If the Host, for some reason, decides to send
SET_CONFIGURATION request twice the same issue is seen.
This patch prevents from reserving additional USB transfer
slots twice.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Added a #define for the maximum attribute length defined
by the core spec. Usefull for GATT servers and clients that
deals with long values.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The NVS tests have been disabled here with commit
tests: nvs: Disable running the 0x00 test suite
(22be0d8fd5)
due to problems with flash_simulator.
With introduction of below fixes:
drivers/flash/flash_simulator: Fix flash_sim_write
(bec0c7f279)
drivers/flash/fash_simulator: Fix initialization for non-posix
(849a5432df)
the tests can be enabled back.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add a tag at sample.yaml to exclude the platform mec15xxevb_assy6853
because of unsupported. Refer github issue #27576.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
This patch implements optional authentication phase, which is done
between link establishment and network phases. It is part of LCP option
negotiation to decide whether authentication is needed and which
protocol will be used. For now we add only PAP support and try to
negotiate it when some other protocol (e.g. CHAP or EAP) is proposed
earlier. For simplicity reason we only add one way authentication
support, which means that we try to authenticate to the other peer, but
do not require authentication from it.
This is an important step to make PPP work with cellular network modems,
because most of them require to provide username and password within PPP
authentication phase. Those credentials are used by modem to login to
cellular network. In most cases however it is enough to provide dummy
values, because they are not verified. For this reason and simplicity of
this patch we hardcode PAP Peer-ID and Password now.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This module had only some header includes, without actual code. Remove
it, as it is better to create one module per authentication protocol
anyway.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add enums of PAP, CHAP and EAP authentication protocols. Also add their
string representations, so they will nicely show up in logs during
debugging.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Interpret -EINVAL return value from options' parse() callback as "option
value is not supported". After receiving such value nack() callback will
be executed in order to put supported value in the response.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Create two threads, one for receiving packet socket data and
the other for sending raw Ethernet frames.
Add flood option where it is possible to stress test the IP
stack. Flooding is disabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shell will display a warning message if there was a request to print
a message on the not initialized shell backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Disable shell print functions if the shell is not initialized.
Update tests accordingly.
Fixes#27161
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
Make explicit what registers we are going to be touched / modified when
using z_arm64_enter_exc and z_arm64_exit_exc.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
