Implements handling of the BIG sync commands in the ULL.
LLL support and handling of ACAD (biginfo) remaining.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Clean up included header files, remove including
zephyr/types.h and other deprecated or redundant
header files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation of HCI_LE_Set_Connectionless_CTE_-
Transmit_Parameters command in HCI.
Add implementation of command handling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
'ext_hdr' member only covers extended header part of 'ext_hdr_adv_data'
and with addition of 'data' member to 'pdu_adv_ext_hdr' those can be
used to quickly access both extended header flags and data directly
from 'pdu_adv' without need for extra local variables and casts.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
pdu_adv_hdr name is quite confusing since it suggests some generic
header for advertising PDUs while this in fact is extended header
which is a part of common extended advertising payload and only applies
to extended advertising PDUs.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The 'adi' part of that member name does not make sense since ADI is
already part of extended header, so we only have 'extended header' and
'advertising data'.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
If handle mapping is enabled, we need to use proper advertising set
handle in HCI event.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Removed the node_rx argument for the BIG create/terminate
functions. The event should not be sent right after the
command, but needs to wait for transmissions of
empty BIS packets or BIG terminate indications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements the BIG terminate command that terminates a
BIG and returns the appropriate events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements handling of the BIG create command in the upper link layer.
Does not yet handle sending any BIS events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Read ISO Link Quality command
* LE Read ISO TX Sync command
* LE Set Host Feature Command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fix field names of bt_hci_cp_le_setup_iso_path in le_setup_iso_path to
make CIS central/periphal compile and adjust parameter names for
ll_setup_iso_path accordingly.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Implement HCI commands to read information about supported codecs and
controller delay.
* Read Local Supported Codecs command (v1 and v2)
* Read Local Supported Codec Capabilities command
* Read Local Supported Controller Delay command
The following functions are implemented as "weak" symbols and should
be overridden to fill in vendor-specific information into the above
commands.
* hci_vendor_read_std_codecs
* hci_vendor_read_vs_codecs
* hci_vendor_read_codec_capabilities
* hci_vendor_read_ctlr_delay
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add implementation of HCI_LE_Set_Connection_CTE_Transmit_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add partial implementation for handling Bluetooth 5.1 Direction
Finding HCI command HCI_LE_Read_Antenna_Information to controller
Upper Link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix node rx buffer leak if extended advertising and/or
periodic sync reports are masked out by the host.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added code comments to explain the reasons to drop
incomplete advertising and sync report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Report generation that skipped
population of AD data when there was no extended header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Setup ISO Data Path command
* LE Remove ISO Data Path command
* Configure Data Path command
* LE Set CIG Parameters Test command
* LE ISO Read Test Counters command
* LE ISO Receive Test command
* LE ISO Test End command
* LE ISO Transmit Test command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fix Extended Advertising Data population when there is no
Extended Header to be filled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of guarding the NODE_RX_TYPE_USER cases with
CONFIG_BT_CTLR_USER_EXT we guard them with
CONFIG_BT_CTLR_USER_EVT_RANGE > 0 as that is the actual value that
enables/disables the NODE_RX_TYPE_USER values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of having explicit values for each entry in the enum that
has to be updated for each new entry (thus requiring manual work
which can also be error-prone), the enum will now be
self-incrementing, to make it easier and safer to add new
entries.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Set CIG Parameters command
* LE Remove CIG command
* LE Create CIS command
* LE Accept CIS Request command
* LE Reject CIS Request command
* LE CIS Established event
* LE CIS Request event
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix the ll_scan_enable interface signature, place duration
before period parameter to reflect the order as in the HCI
LE Set Extended Scan Enable command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactoring of conditional compilation related to extended
scanning with duration and period.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove generation of Periodic Sync Lost HCI event generation
that is not needed as per BT Spec. v5.2 Vol.4 Part E.
Section 7.8.69.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to perform Periodic Sync Terminate,
generation of Sync Lost on terminate and on remote device
termination of Periodic Advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fill the correct local clock accurracy in the Sync Info
structure in the Periodic Advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A build assert in dummy.c lists the following requirement:
[...] receive thread priority shall be higher than the Bluetooth
Host's Tx and the Controller's receive thread priority.
This is required in order to dispatch Number of Completed Packets
event before any new data arrives on a connection to the Host threads.
The drivers uses a priority that is equal to the Host TX thread,
and since they don't use the CONFIG define that is only available
to the controller then this BUILD_ASSERT will not catch the
requirement.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix conditional compilations that fail when combinations
of Broadcaster, Observer, Peripheral and/or Central are
selected to build an application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
