Change-Id: I211817620db2130ffb275a5962a24bf90aad57e9
Co-authored-by: Kevin Townsend <kevin@ktownsend.com>
Signed-off-by: David Vincze <david.vincze@linaro.org>
Musca-S1 is a Cortex-M33 based SoC. It's similar to the
Musca-B1, but among other things the embedded flash has
been replaced with embedded MRAM (eMRAM) memory.
The Musca-S1 files have been created based on the Musca-B1
SoC and board files.
Add the Musca-S1 board to the list of allowed platforms
for the TF-M integration examples.
Change-Id: I4f517d28d0a5b8c4a3fc3fab73adb5519acfc3c2
Signed-off-by: David Vincze <david.vincze@linaro.org>
Adds an assert on the "old" ref counter when doing unref, that
checks if there indeed is a reference to unref. This prevents
any underflows of the ref counter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add sample code which demostrates the use of the offset
register offered in the TMP117.
Also add information about tmp117 in README.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
TMP117 from TI is a sensor similar to tmp116, but it has more precision
and it also supports the offset register.
Add support for SENSOR_ATTR_OFFSET, which is used by TMP117 to the
pre-exisiting tmp116 driver.
This commit also enables multiple instances and adds TMP117 to Kconfig.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Fix issue #27570
Waiting for the log process thread handle all the log by
k_sleep(TIMEOUT), define a reasonable TIMEOUT for all platform
is difficult. This patch sync the test thread and log process
thread by taking and giving a defined semaphore.
Signed-off-by: Meng xianglin <xianglinx.meng@intel.com>
accessing the stack below guard_end is always a bug. some
instrustions (like enter_s {r13-r26, fp, blink}) push a collection
of registers on to the stack. In this situation, the fault_addr will
less than guard_end, but sp will greater than guard_end.
|------stack base-------| <--- high address
| |
| | <--- sp
|------stack top--------|
|------guard_end--------|
| | <--- fault_addr
| |
|------guard_start------| <--- low address
So we need to remove the SP check. Trade-off here is if we prefer
'false' classifications of MPU stack guard area accesses as stack
error or as general mpu error. The faults get caught anyway, this is
just about classification: don't see a strong need for the extra check
to only report stack pointer accesses to guard area as stack error,
instead of all accesses.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Add `get_status` function to dmamux driver api.
This uses the regular dma driver `get_status` function.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
off_t can be 32-bit or 64-bit depending on the platform. STM32 flash
addresses are always 32-bit so it's safe to use long here.
Signed-off-by: Martin Jäger <martin@libre.solar>
k_thread_system_pool_assign() is referenced at in the memory pool API
documentation and used in multiple tests, but generated documentation
was excluded by preprocessor condition. Add a PREDEFINED to expose
it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Convert device to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the dtsi config for the stm32f303k8.
In addition fixing to long line for author.
Fixing sram0 memory size.
Signed-off-by: Sebastian Schwabe <sebastian.schwabe@mailbox.tu-dresden.de>
This commit adds the soc config for the STM32F303x8.
Add the STM32F303x8 as choice to the Kconfig.soc.
Fixing indention error in Kconfig.soc.
Signed-off-by: Sebastian Schwabe <sebastian.schwabe@mailbox.tu-dresden.de>
This branch adds support for the nucleo_f303k8 board.
The configuration is based on the nucleo_l011k4,
the f302r8 and the ST reference manual.
I had successfully tested the following sample code:
blinky
blink_led (uses TIM2_CH1 on PA0)
button
hello_world
Signed-off-by: Sebastian Schwabe <sebastian.schwabe@mailbox.tu-dresden.de>
The test currently does nothing, as it depends on the
advertiser part of the test which has not yet been implemented
properly. Also slightly modified how the test is run.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements the ull_sync_iso_setup function which starts the
ticker for ISO sync. Furthermore, ll_big_sync_terminate
will not stop the ticker as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements handling of the BIG sync commands in the ULL.
LLL support and handling of ACAD (biginfo) remaining.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use PPIs 0-5 consistently across nRF51x and nRF52x for SW
PWM driver. Bluetooth LE controller's use of PPI has been
adjusted to use PPI 6-19 based on features enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adjust the PPI used by nRF51x and nRF52x so that PPI 0-5 is
available for application's use or for SW PWM driver use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Under CONFIG_BT_TICKER_EXT configuration, the ticker interface has been
extended to support enabling/disabling must-expire scheduling. This
means that conn and slave ticker start calls can now omit must-expire
default-on configuration, relying on LLL updating the mode as needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Introduce the field that can be used to associate a given sampling
sequence with any other data needed in the sampling-done callback
function.
Adjust one ADC API test case that uses a sequence callback so that
it checks if this introduced field is propagated as expected.
Also clarify in the description of the `sequence` parameter of the
callback function that this parameter is not supposed to be supplied
to the CONTAINER_OF() macro, to avoid any further confusion in that
regard.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The idle, when power management is enabled, requires system clock to
be present.
This commit adds dependency, to PM option, on SYS_CLOCK_EXISTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Convert tests to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert samples to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert drivers to use pinmux devicetree node to create pinmux device
object.
On intel S1000 we add 'label' as a required property and set it to
'PINMUX' to match CONFIG_PINMUX_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert soc nios2 qspi to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Do not store shared memory variables into yaml and check for validity of
imported hardware map before attempting to modify it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert intel gna driver to DEVICE_DEFINE instead of
DEVICE_AND_API_INIT so we can deprecate DEVICE_AND_API_INIT in the
future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
