Permit enabling already enabled advertising. Enabling
advertising when it is already enabled can cause the
random address to change, as specified in the Bluetooth
Specifications.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit increases number of available serialization buffers to
account for possible delays caused by serialization itself and
processing on the application core.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
By default ICMP desination unreachable error packets are generated when
input packets target ports that are not in a listening state. This not
only reveals the presence of the host on the network which may be
considered a security vulnerability depending on the application, it
also ends up triggering ARP lookups to respond to the sending host. With
a small ARP table and a network where there may be broadcast (or
multicast) service discovery traffic such as mDNS or uPnP, ARP table
thrashing can occur impacting network stack performance.
Signed-off-by: Berend Ozceri <berend@recogni.com>
add a config CONFIG_QEMU_UEFI_BOOT to indicate whether
the qemu will use UEFI bootable method;
add a new test "sample.basic.helloworld.uefi" to verify
UEFT bootable method on qemu_x86_64 platform.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
When enabling MSI & MSI-X, the code seemed to handle fallback to MSI
when MSI-X is not available, but the logic uses MSI-X even if not
available and the MSI path never gets used.
Fixes: a2491b321e ("drivers/pcie: Add support for MSI-X")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
When building on non-X86 platforms K_MEM_PERM_RW gets undefined.
Fixes: a2491b321e ("drivers/pcie: Add support for MSI-X")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Introduce a bugfix for CONFIG_OPENTHREAD_CUSTOM_PARAMETERS handling in
OpenThread build system integration for Zephyr.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The latest MESH.TS 1.0.1.2 4.15.10 Appkey List Procedures
MESH/NODE/CFG/AKL/BI-04-C
Verify that the IUT can respond to an Config AppKey Add
message with NetKeyIndex and AppKeyIndex already stored.
6. Repeat step 1 with the same AppKey, the same
AppKeyIndex, but NetKeyIndex field set to 0x001.
7. The Lower Tester expects the IUT to respond
with an Config AppKey Status message with the
Status field set to 0x04 (Invalid NetKey) and
the NetKeyIndex and AppKeyIndex values equal to
those sent in step 5.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The function to execute shell commands: shell_execute_cmd will now
behave similarly to invoking command line commands.
I.e. after the command is executed the command buffer is cleared,
while the cursor is set to the initial position.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
I saw a user wondering what this is for and and where it comes from.
Provide a comment header with some explanation and a pointer to where
to find out more.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix the missing resumption of connectable advertising and
release of received connection complete buffers from LLL
after detecting connection from same peer.
Relates to commit 010c5c2f20 ("Bluetooth: controller:
Ignore connections from same peer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Metaware assembler doesn't accept '@' symbol in the beginning
of symbol name like GNU does.
Drop excessive '@' for _curr_cpu symbol.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The constructors of static objects are stored in ".ctors"
section. In case of MWDT toolchain we have incompatible
".ctors" section format with GNU toolchain. So let's use
initialization code provided by MWDT instead of Zephyr one
in case of MWDT toolchain usage.
As it is done for GNU toolchain We call constructors of
static objects but we don't call destructors for them.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Convert ws2812 LED strip driver to `spi_dt_spec`. Also moves the init
function implementation outside the declaration macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Convert the at2x eeprom driver to `spi_dt_spec` and `i2c_dt_spec`.
I2C functions are not fully converted due to the non-standard addressing
scheme.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add sensor API hysteresis attribute. This attribute allows for
configuring trigger threshold hysteresis values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Microchip XEC has been using the standard NS16550 driver.
Using the standard NS16550 driver requires extra HW programming
for XEC UART in board level and did not support XEC GIRQ interrupt
programming. We add an XEC specific driver and remove UART specific
register programming from the board level and implement interrupt
support. Also, by implementing a SoC specific driver we can add
driver PM in the future.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This change adds support to the cc1352r_sensortag for the hdc2xxx
temperature and humidity sensor introduced independently in #36342.
Fixes#36410
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
To get confirmation this will work before I cut the release. That
pre-release is already available on PyPI.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a stopgap release meant to backport bug fixes and new features
while v0.12.0 is blocked.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The setup() method is trying to find the zephyr repository by name,
but it's not passing allow_paths=False to the west method it uses to
search.
That may lead to unpredictable results depending on what the current
working directory is in the calling environment.
For robustness, disallow paths and make sure we are only searching for
the zephyr project by name.
Add some more comments to explain what is going on and clean up the
empty string handling while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
To keep bisectability, cmake and west modifications
needs to be in sync.
cmake: update external project configuration
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Microchip XEC two custom DT properies girqs and pcrs cell sizes
are defined as constants. There is no need to replicate these
is the chip DTSI since the value cannot be changes. Fix the syntax
of the cell size constant to match the naming convention used
thoughout DT.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Figuring out what the lowest possible priority in platforms where
CONFIG_ZERO_LATENCY_IRQS is supported is not possible before the Kconfig
tree is built and resolved. In order to make the user's life easier,
abort the build if IRQ_CONNECT() is called with an invalid (i.e. too
low) priority.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Pull a new revision of the hal_ti module that uses dynamic interrupts
instead of build-time ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a check for the mandatory channel receive callback when the
application provides the L2CAP channel operations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
