Spaces were used instead of tabs. Fix up by using Lindent from
Linux kernel since we use same coding style.
Change-Id: Iece925ae40cad342fde1e33c240cb2ac23a15a9b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Spaces were used instead of tabs. Fix up by using Lindent from
Linux kernel since we use same coding style.
Change-Id: I7aa5c3f25a800fdaec6852e0d36daa07f1424f9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Spaces were used instead of tabs. Fix up by using Lindent from
Linux kernel since we use same coding style.
Change-Id: I7294d1cef98031ba4ca1c202e0f19dbb7e504e16
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Spaces were used instead of tabs. Fix up by using Lindent from
Linux kernel since we use same coding style.
Change-Id: I7ecb6dfd602ea4768d6a53e509f29b208d96c479
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Print some stuff, and verify that the output is as expected.
Not comprehensive (yet).
Change-Id: Ib1ce8dff8165d8ee6b02ff6272513fd76a7be842
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Casual building in the tree leads to regular messups where I forget to
clean up the outdir first when switching platforms and the build fails
in strange ways.
Put a $(BOARD) subdirectory under outdir, and use that at $(O) when
the user does not provide an output directory.
Note that "make pristine" continues to remove the entire outdir,
including other architecutres (so as to make the tree pristine).
Also update a few spots where outdir was mentioned in documentation to
clarify the new scheme.
Change-Id: I365eec06ea440f17380b9f9ace5f5d34b9bed4dc
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Microkernels now support 'main' as a task entry point.
Change-Id: I39b07c191a98748191536ade6f87ec02da064bf1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This test can't run properly because it already defines
an IPM console sender, and instantiating the dummy one
prevents any messages from being forwarded to the x86 side.
Issue: ZEP-708
Change-Id: Ib13c5df5db67f3d9fde960f8e5cda354c60efae1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The QEMU bug in the SDK has been fixed.
This reverts commit eb63710960.
Change-Id: Ic405c9df0f7aebb2a9d20180c7b0c04889669610
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are also seeing qemu failures in the synchronous wakeup tests,
where the fiber should be resuming instantly but in practice sees a
one-tick delay due to the emulation environment not being
deterministic. Allow one tick of slop in those too.
Change-Id: Idab7c45ea0b10bd955b90a98d3884b5fe0571187
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On some hardware (Qemu) the timer guarantees aren't honored as well as
we like, and these tests are observed to spuriously fail in practice
(e.g. CI testing). Allow for one tick of slop when testing sleep
durations.
Change-Id: I4b694c0a9ddfc1ee48510fa5deda2bb31499debf
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Bluetooth tester is now using new system log macros.
JIRA: ZEP-311
Change-Id: I6398f2de12d5ba1073e40fd45aa8e0177d1e279d
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Previously, exception stubs had to be declared in assembly
language files. Now we have two new APIs to regsiter exception
handlers at C toplevel:
_EXCEPTION_CONNECT_CODE(handler, vector)
_EXCEPTION_CONNECT_NOCODE(handler, vector)
For x86 exceptions that do and do not push error codes onto
the stack respectively.
In addition, it's now no longer necessary to #define around
exception registration. We now use .gnu.linkonce magic such that
the first _EXCEPTION_CONNECT_*() that the linker finds is used
for the specified vector. Applications are free to install their
own exception handlers which will take precedence over default
handlers such as installed by arch/x86/core/fatal.c
Some Makefiles have been adjusted so that the default exception
handlers in arch/x86/core/fatal.c are linked last. The code has
been tested that the right order of precedence is taken for
exceptions overridden in the floating point, gdb debug, or
application code. The asm SYS_NANO_CPU_EXC_CONNECT API has been
removed; it was ill- conceived as it only worked for exceptions
that didn't push error codes. All the asm NANO_CPU_EXC_CONNECT_*
APIs are gone as well in favor of the new _EXCEPTION_CONNNECT_*()
APIs.
CONFIG_EXCEPTION_DEBUG no longer needs to be disabled for test
cases that define their own exception handlers.
Issue: ZEP-203
Change-Id: I782e0143fba832d18cdf4daaa7e47820595fe041
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We filtered on CONFIG_SOC_FSL_FRDM_K64F which doesn't exist change it to
CONFIG_SOC_MK64F12 to allow this testcase to run on the K64 platform
Change-Id: Ifdd89e66aa403c3bb28c07d3a546037275a5118d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This contain the run of the self test for the ciphers, crypto
algorithms and utilities of mbedTLS.
Jira: ZEP-327
Jira: ZEP-340
Jira: ZEP-495
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: Ic1bb30b7ed691f17421510cd914ec5096e4e70ea
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This introduces the default language to use for building, deploying
and evaluating testcases on real hardware in the automation framework.
To be able to filter testcases out based on .config values, we split
the build process into generating the configuration file, filtering
and then the actual building.
The configuration step is done first, to be able to skip as soon
as possible.
This file is in the top level as the test runner will look for
defaults in parent directories.
Note that the default's entry in tests/.tcdefaults takes advantage of
the fact that all:
- the test cases under tests/ print standarized strings for success
or failure.
- the tc_util.h kernel header will print the passed runid if specified
when finalizing the testcase. We will make sure it is found to deem
the TC succesful, ensuring that the right image is flashed and
verified.
Change-Id: If40b226aef9583f7ce4064405d9334de379f2b00
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This adds device address to the controller_info data. This address
may be used then by PTS for establishing connection etc.
Change-Id: Ic2319c452d94ac79376659ba37b4c9d812ccf9ae
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
If CONFIG_BLUETOOTH_PRIVACY is set in Kconfig, current settings
shall indicate it's usage.
Change-Id: I0645aedf1b774617c9d97cec0070908aef919ca7
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Based on BTP specification following GAP_SETTINGS_* flags were added:
GAP_SETTINGS_CONTROLLER_CONFIG,
GAP_SETTINGS_STATIC_ADDRESS
Change-Id: Ic87d13772c0ef9c9bc8bba331c8bc9f3ffc93f87
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
When tester application has been initialized, send this event
to indicate that Upper Tester can send first BTP command.
Change-Id: Id3f4dd246c4e67982057f9518b4b0036e79a6a01
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Before sending any command, the tester shall wait for this event
indicating that IUT is ready to accept first BTP command.
This is needed, because some devices need more time to initialize
their stacks, so that the first BTP command can be lost.
Change-Id: I92d1c6ea8be905734037eb29f7f270a70ab1583e
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Depending on advertising options this can be non-connectable address.
NFC pairing application document also allows broadcaster/observer
roles.
Change-Id: I9b104ac8fb9752a083a7a31fc20598c66f23f608
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Daily build failing due to this test case timing out
execution after 3 hours. Locally this test takes about
a minute, the issues with CI are being looked into.
Change-Id: I27e40846dde25fc65281b4aea61d10b403c6512d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows to query LE and BR/EDR OOB data.
Change-Id: I8bc281a9549092c1c4b40c346580abb5fd51d02d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to test if receiving and sending simultaneously is
working properly with tools such as BlueZ's l2test.
Change-Id: Ic6bcd00a4e1448bebd3ae74bcc58986872332bbe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 16550 will now be the default console device.
Change-Id: I92a6b49984b055e7d5f5c97e5192150be0d5c5c7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Having two parallel implementations is a maintenance issue, especially
when some strategically placed #ifdefs will suffice.
We prefer the ASM versions for SYS V, as we need complete control of
the emitted assembly for interrupt handling and context switching.
The SYS V code is far more mature. IAMCU C code has known issues with
-fomit-frame-pointer.
The only difference between the two calling conventions is that the
first three function arguments are provided in eax, edx, ecx instead
of on the stack.
Issue: ZEP-49
Change-Id: I9245e4b0ffbeb6d890a4f08bc8a3a49faa6d8e7b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Now uses net_nbuf_ll() to point to link layer header.
Also the ARP req test passes properly.
Change-Id: If649ff19a064490bff33d03b4ce70ef11bfa7cd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using hard coded net_if, get the default network
interface using net_if_get_default() function.
Change-Id: I6248555ce57ae5196adea7baa9db325660a71255
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These two boards don't have enough RAM to effectively run this
test case without making the stacks so small they don't work
on other platforms. ARM is sill covered by other boards.
Change-Id: Ibf20eefaf29f989cbb6da6cd3a8eeed2faa1950b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Right now there are tests for IP packet checksum calculation.
Change-Id: I1e9e72d01d4690728269c4484f8628350cf95729
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
