Microkernel and nanokernel tests now use customized source code
to eliminate use of MICROKERNEL and NANOKERNEL config options.
Change-Id: I7f9aff4729a7a257c4a0a0f5939ba0f5525af460
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances the microkernel memory pool test application to
include tests for dynamic memory allocation and freeing
from the heap memory pool using kernel APIs that behave
like malloc() and free().
This enhancement works under both the microkernel and
unified kernel.
Change-Id: Ibc485877ea9d60307edb8f93c54a0b94ebacb017
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Drop the _m3 from the test name since this can run on M0, M3, M4, etc.
Change-Id: Ia12ece62fc7b42e28f37e191c90c0dead48d40d0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The build_all tests contain an ever growing list of device drivers to
build. Ideally we minimize the number of images we build, but we
already observe that some of the tests, notably sensors, is too big
for some of our supported boards.
Rather disable an ever growing list of boards as the build_all tests
get bigger it would be better to split the tests into smaller chunks
that can reasonably be expected to run on any supported board.
We split the sensor test set into two, the division is arbitrary,
based on the name of the driver. This allows us to remove the filter
on the quark_d2000.
The current split into two groups is arbirary, in the future it is
inevitable that as the list of supported drivers grows, we will need
to further subdivied the larger tests.
Change-Id: If7ee00b3c8e1749c4c827f83d7cbc2feb70e56ad
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This is used by a test case, and it's better to just put this
here instead of forking the linker scripts.
Change-Id: Ifbb90b73bb26118ae2422cc6feccb3db58a26f2c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This change shortens the Service Class macro name from
BT_SDP_*_SVCLASS_ID to BT_SDP_*_SVCLASS
Change-Id: I1150baae24428c6b76f005d11003291016e0a03e
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds SPP as a sample SDP service during RFCOMM
server registration. The SPP channel is now used as the
fixed channel for RFCOMM register command.
Change-Id: I3b5ad3995725adca55db1497d4a35099f6311f3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Provides users with a more compact and intuitive API for kernel
timers.
Provides legacy support for microkernel timers and nanokernel
timers by building on the new kernel timer infrastructure.
Each timer type requires only a small amount of additional
wrapper code, as well as the addition of a single pointer
field to the underlying timer structure, all of which will be
easily removed when support for the legacy APIs is discontinued.
Change-Id: I282dfaf1ed08681703baabf21e4dbc3516ee7463
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
In order to print the proper strings that the test case execution
frameworks expect, use the macros defined in tc_util.h.
Change-Id: I841c5454fbcf4f679e6285538e838f039442b1f8
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When running sanity with asserts turned on the following tests don't
fit the ROM region of CONFIG_SOC_QUARK_D2000:
- test_build_sensor_triggers
- test_build_sensors
Added filters prevent these test from being executed when asserts are
on.
Jira: ZEP-1063
Change-Id: Ib046bcb227f4a49b524894aa5aea80debe159aae
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The k64 pinmux driver can be used for any k64 board, not just frdm_k64f,
therefore renaming the driver accordingly.
Change-Id: I45e96d4a5ff6aa859d0f57fe098e44a8ae5283d1
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This application now executes successfully.
Change-Id: Ib3c2673fd7e8f0ff001a8355b4f7c8ddd808da94
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This testcase was being ran on Quark D2000 because it failed to
identify itself as micro. There is not enough RAM for that.
Properly tag.
Change-Id: I9fd4235f4436b914b89b10616cbed0cfb3e97b40
Jira: ZEP-1014
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When the debug option is enabled ECC DSA test doesn't have enough stack
space so qemu fails. Adding double stack size for special case of qemu
and CONFIG_DEBUG.
Jira: ZEP-1066
Change-Id: Ib14d853de2b1c755a6171787845433648d61b75b
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Some of tests/drivers/build_all/ test are failing link step only
when debug is enabled, these filters prevent those tests from being
executed under such configuration.
Jira: ZEP-1063
Change-Id: Ib2ff649794a1d73b133fbf998bbe8143a822c753
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Some of tests/crypto/test_ecc_dsa test are failing link step only
when debug is enabled, these filters prevent those tests from being
executed under such configuration.
Jira: ZEP-1063
Change-Id: I4b7376c49a401e21c413427918be549934ce03d5
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Some of tests/bluetooth test are failing link step only when debug
is enabled, these filters prevent those tests from being executed
under such configuration.
Jira: ZEP-1063
Change-Id: I87fa73710d78346b1b2ce587e9055b0732d9cb49
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Clean up left-overs from this getting fixed first in master.
Change-Id: Ief41ecfdeeb51fbc76f2fe045a412ff1643f69c9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This implements GAP Unpair command handler used to remove pairing
information.
Change-Id: Ia2e2400ea06b2b904f89ec3ee88527d1ea8f7f38
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This event will be used to inform tester about PTS identity address.
Change-Id: I3d25c69c3fc9a8d8a728497d1dc1d57084373e97
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves discovery logic to the tester application.
BTP Start Discovery command flags have been extended with
"Use observation procedure" bit.
For now, Tester can search for devices in limited/general discoverable
mode or those that are broadcasters by setting corresponding flag bits.
Change-Id: I7142e8fdf40a9081787538e433067335d3ee0564
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This test build where BR/EDR SMP support is enabled without
LE central or singing support.
Change-Id: I61bc17e989a5752500a7d29557609d9e54b6006d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
No other board has BR/EDR support at the moment, and we're too easily
hitting RAM limits on them.
Change-Id: I81c800f979d34bd58f73a34c1038a9327556adb2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend the driver build_all tests to include a test for ethernet
drivers.
Change-Id: I2b01d547001d3fae45cda3bc95a74c35fd75ab2b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
sys_memcpy_swap() and sys_mem_swap are tested.
Change-Id: Ib7ee9bd5e58a17cb41960c1834510d6643dc8271
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Gets rid of official support for dynamic timer allocation
in the unified kernel, since users can easily define and
initialize timers at any time. Legacy support for dynamic
timers is maintained for backwards compatibility reasons
for the time being ...
Change-Id: I12b3e25914fe11e3886065bee4e96fb96f59b299
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the test to account for changes in LIFO object behavior
in the unified kernel.
Note: A LIFO object shouldn't really be used to try and pass
data items between two different threads in an ordered manner,
as this test is doing. Ordered behavior should only be expected
when a single thread is adding and removing items from a LIFO.
A LIFO is typically used to pass data items between different
threads when ordering doesn't matter -- for example, when using the
LIFO to implement a shared pool of data items that can be allocated
and returned by a bunch of threads. (A LIFO object is more efficient
than a FIFO object for implementing this kind of pool.)
Change-Id: Ic4cbd8b8368477e72c1bf0bca35600b78f963933
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The nanokernel version of this application now uses its own source
files to eliminate its reliance on the build system setting the
CONFIG_MICROKERNEL and CONFIG_NANOKERNEL options correctly
(which the unified kernel build system doesn't do).
Change-Id: Ie7254cce314dc8d55ab325f784bd4f3309329baa
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The nanokernel version of this application now uses its own source
files to eliminate its reliance on the build system setting the
CONFIG_MICROKERNEL and CONFIG_NANOKERNEL options correctly
(which the unified kernel build system doesn't do).
Change-Id: Ief1d90251df62b54a6814e82cb95730088d40d99
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The nanokernel version of this application now uses its own source
file to eliminate its reliance on the build system setting the
CONFIG_MICROKERNEL and CONFIG_NANOKERNEL options correctly
(which the unified kernel build system doesn't do).
Change-Id: Ife27f8172b2be33b95136ccdfa29522c8a6fba0b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adjusted thread priorities to lie within the default priority
range for the unified kernel.
Change-Id: I130c60b382a6205c4c41b6f74f77679c87e6dc4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Fixes bug with the private definition of the helper task
that incorrectly added task to the EXE task group.
(This is problematic because the regression task also
starts the helper task!)
Revises test code to use legacy kernel types for task id and
task priority values, rather than using "int", since these
types are not necessarily integer values in the unified kernel.
Revises task/thread priorities used by test so they fit within
the unified kernel's default priority range.
Change-Id: I431120e5d1b44c65f423addfff1330f994fed71b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
