This extends the test for memory mapped stack, as the address of
memory mapped stack object would be different than the actual
stack object.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extends the test for memory mapped stack, as the address of
memory mapped stack object would be different than the actual
stack object.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This test is intended to teach the conventions and best practices to a
potential contributor that wants to add a test, for say a new feature.
It is liberally commented on purpose, so new contributors don't have to
spend two weeks understanding the intricacies of the simulator, the bsim
test framework, the native builds, backchannels, etc..
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This code can be found (kinda) duplicated all over
`tests/bsim/bluetooth`.
Put it in a common place.
Refactoring the current tests will be done in a future commit.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Improve function which guesses the test name so the calling
script can be invoked from any folder, not just Zephyr's
base.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fixes some missed renames for overlays with the recent change
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This API is not widely used and it is actually broken since device
runtime power management is not checking it when suspending and
resuming.
On top of that, this API is very close to pm_device_busy* API,
close enough to consolidate in only one API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
EATT is not properly used by LE audio nor is the
Zephyr implementation very good, so disable for now
or at least until the BSIM tests are passing with it
enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add an instance of the output diagnostics sensor for the
power train switch TLE9104 to the build all tests.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Increase the supported receive state count to 4, as
several on-market device have at least 2 and sometimes
more.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This patch adds support for custom commands to be executed during the
build of an llext target. The commands can be executed at different
points in the build process:
- PRE_BUILD: Before the llext code is linked.
- POST_BUILD: After the llext code is built, but before packaging
it in an .llext file.
- POST_PKG: After the llext file has been created.
Note that PRE_BUILD is not supported for ARM targets, as in that case
object files are used directly and there is no actual linking step.
The commands can be added using the new add_llext_command() function.
An example usage of it, along with some target properties, is added to
the hello_world test case.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add entry for st7796s to display build_all test, so that the controller
driver will be built by CI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Tests which were using the new nordic UART shim where failing
on the bsim targets. They are now fixed and tests can be
re-enabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The initial version of an input driver for Cirque Pinnacle ASIC supports:
* Setting sensitivity
* Choosing between relative and absolute modes
* Relative mode
* Primary tap
* Swapping X and Y
* Absolute mode
* Setting number of idle packets
* Clipping coordinates outside of active range
* Scaling coordinates
* Inverting X and Y coordinates
Signed-off-by: Ilia Kharin <akscram@gmail.com>
This commit fixes 'test_verify_send_report()' function as it was
not properly waiting for a MLDv2 report after sending a query. The
asserted value was set for the previous report sent after joining a
group.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Update prj.conf so that
subsys/net/lib/sockets/socketpair.c
is pulled into the build and zsock_socketpair() is
properly defined.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Check for the existence of
pthread_rwlockattr_getpshared()
and
pthread_rwlockattr_setpshared().
Signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
This adds a board name that got missed in commit
8dc3f85622 (hwmv2: Introduce Hardware
model version 2 and convert devices)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Set CONFIG_BT_MAX_PAIRED with same value as in host.
This is needed for CSIP tests with three lower testers:
CSIP/CL/SP/BV-07-C, CSIP/CL/SP/BV-03-C, CSIP/CL/SP/BV-04-C,
CSIP/CL/SPE/BI-01-C
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
