ESP32 SoC refactoring added new SOC_SERIES definition,
which was missed by #60183. This fixes it.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
SPI driver is current working for common SPI devices.
However, addressable LED like WS2812 requires MOSI line to be
default LOW during initialization. This PR adds such option.
This has no effect on common SPI operation.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add option to use (by defining the `wake-gpios` devicetree properties)
an additional signal line between SPI master and SPI slave that allows
the latter to stay in low-power state and wake up only when a transfer
is to occur.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Refactor the function to make the execution flow in transceive()
clearer. In particular, return error codes directly, not through
spi_context_complete() which is unnecessary in this case.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
DMA only works with non-cached memory regions in H7. Check them
and return an error if they don't match this condition.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
This is a follow-up to commit 4c20403629.
CONTAINER_OF() cannot be used to obtain the device pointer from its
data pointer as this data is not contained in the device structure.
Instead, use a dedicated member in the device data structure to store
the device pointer.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
- use CONFIG_HAS_HW_NRF_* symbols consistently in nRF multi-instance
drivers when creating particular driver instances
- remove unnecessary hidden Kconfig options that indicated the type of
peripheral to be used by a given instance (e.g. SPI, SPIM, or SPIS)
and enabled proper nrfx driver instance; instead, use one option per
peripheral type and include the corresponding shim driver flavor into
compilation basing on that option (not the one that enables the nrfx
driver as it was incorrectly done so far in some cases)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This CL attempts to implement npcx's flash driver instead of the
original one (npcx spi driver plus spi_nor flash driver).
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The MCUX DMA controller only supports a single data_size
for a DMA transfer, not separate ones for source and
dest. An older version of the DMA driver used
dest_data_size as the DMA transfer size, but the
current one uses MIN(dest/source) as the trasnfer
size, which breaks case when SPI wants to do 2-byte
transfers.
Signed-off-by: Mike J. Chen <mjchen@google.com>
The `spi_mcux_transceive` had 2 return calls when the
`CONFIG_SPI_MCUX_LPSPI_DMA` flag was active. The first return would be
called and the later was unreachable. With the fix, now the return calls
are mutually exclusive. Also, the `transceive` call is not compiled with
the `CONFIG_SPI_MCUX_LPSPI_DMA` flag is active.
Fixes#59533
Signed-off-by: Dipak Shetty <dipak.shetty@zeiss.com>
The eSPI, I2C, and SPI emulators use devicetree macros to build an array
of devices on the virtual bus. Currently, they will add device nodes that
are not status-okay. This leads to linker errors because the respective
device drivers would not have instantiated device structs for these
nodes --assuming the driver was even compiled. This can be frustrating
if nodes need to be disabled for debugging or configuration purposes.
Update the bus emulators to only consider status-okay nodes by changing
the macros used to iterate over bus devices.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Fix for bug:
https://github.com/zephyrproject-rtos/zephyr/issues/59575
The dma version of the version of the driver can
invoke multiple intermediate dma transfers, like
when the spi_buf_set count is greater than one.
However, there is a bug where chip select is not kept
asserted for all intermediate dma transfers required
to process the entire spi_buf_set.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Replace the timeout for a SPI transceive in slave mode for STM32 DMA
operations with a K_FOREVER. Being an SPI slave means we do not
know when the transaction will start, hence it does not make sense
to have a timeout in such a case.
This will resolve issue #60000.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The `SPI_EMUL_INIT(n)` macro used to instantiate SPI bus emulators
builds an array of SPI devices attached to the bus, but always checks
instance #0 of the bus and not `n`. This makes multiple instances of an
emulated SPI bus unusable and popualtes them all with bus 0's devices.
Change the `0` to `n`, which matches how the I2C bus emulator does it.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Found EMSDP board SPI-FLASH sample broke after adding DFSS
into spi_dw. Found wrong interrput mask resulting in false
interrupt enabled. Now fixed it to fit both DFSS and DW.
Signed-off-by: Siyuan Cheng <siyuanc@synopsys.com>
Introduce DesignWare ARC Data Fusion IP Subsystem(DFSS) SPI
driver for ARC boards, i.e. EMSDP, which uses DW SPI to controll
SPI-Flash and DFSS SPI to connect external devices. Both drivers
share most source code, but DFSS uses ARC auxiliary registers.
Move FIFO depth setting to device tree.
Signed-off-by: Siyuan Cheng <siyuanc@synopsys.com>
Commit 246393e830
("drivers: spi: spi_nrfx_spim: Remove nrf_frequency_t handling")'
introduced two changes, one of them is removing the function
get_nrf_spim_frequency with a strange justification.
This change breaks support for peripherals written in a common way,
where the maximum frequency is set to the maximum supported
by the peripheral, not the controller, see shields for example.
On the occasion of bringing it back, the original function was
refactored to be easier to read and understand.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add driver for OpenTitan SPI host.
Tested and verified single SPI full duplex on opentitan_earlgrey in
Verilator.
Signed-off-by: Shawn Nematbakhsh <shawn@rivosinc.com>
Rather than the rings, which weren't shared between userspace and kernel
space in Zephyr like they are in Linux with io_uring, use atomic mpsc
queues for submission and completion queues.
Most importantly this removes a potential head of line blocker in the
submission queue as the sqe would be held until a task is completed.
As additional bonuses this avoids some additional locks and restrictions
about what can be submitted and where. It also removes the need for
two executors as all chains/transactions are done concurrently.
Lastly this opens up the possibility for a common pool of sqe's to
allocate from potentially saving lots of memory.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Added device tree bindings and implementaion for setting the
spi controllers chip select setup and hold time settings.
Signed-off-by: Dean Sellers <dsellers@evos.com.au>
The nrfx SPI driver depends on semaphores, which require multithreading
support to be enabled.
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
Make use of positive status values in the DMA callback to pass
info to the DMA client after a successful DMA operation.
A completed DMA transfer uses the status 0 while a reached
water mark uses the status 1.
Signed-off-by: Cyril Fougeray <cyril.fougeray@worldcoin.org>
Word size setting limited any SPI transaction to the frame
size. In addition to making the SPI inefficient this
broke drivers that set the word size. It appears that most
drivers use a one byte (8) size for this setting.
This change respects what I think is the intended use of
the word size setting. That is to set the length of
each element in a tx/rx buffer struct.
Signed-off-by: Dean Sellers <dsellers@evos.com.au>
With new nrfx release SPIM driver stores frequency as a `uint32_t`
type representing frequency in `Hz` in its configuration structure.
Additionally `NRFX_SPIM_PIN_NOT_USED` has been removed,
`NRF_SPIM_PIN_NOT_CONNECTED` symbol is used instead.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
When dma is enabled, spi_xmc4xxx_transcieve_dma() needs to disable the
isr used by spi_xmc4xxx_transceive(). Renable the isr at the
end of spi_xmc4xxx_transceive_dma() instead of in spi_xmc4xxx_transceive().
Doing this in latter function will fail compilation when interrupt
support is enabled but dma is disabled.
This is regression from 8494b6413a
but was only caught when xmc47_relax_kit was added which tested this
scenario in tests/drivers/spi/spi_loopback.
Fixes#57494
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
When using gpio chip select the clock line seems to get stuck low after
some transactions. When attempting to use other SPI_CSR registers
the peripheral fails to work as expected.
Always using SPI_CSR[0] when using gpio chip selects resolves the issue.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
spi_context_get_next_buf must not divide `len` by `dfs` because, in SPI,
buffer lengths are given in units of data (in this case, 16 bits), not in
bytes.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
Following #56576, the `cs` field in `struct spi_config` is of type
`struct spi_cs_control` instead of a pointer to the same type.
`spi_xec_qmspi_ldma.c:qmspi_xec_init` tries assigning `NULL` to the
`.cs` field through a designated initializer, which causes a compilation
error.
This PR simply removes the `.cs = NULL` line. The designated initializer
will automatically zeroize the underlying GPIO pin info, which should
have the same effect that setting the pointer to NULL did previously.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Add spi_cs_is_gpio(_dt) helpers to check whether SPI CS is controlled by
GPIO or not. This both improves code readability and isolates SPI
internals.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As of today it is not possible to use SPI dt-spec macros in C++,
something known and documented. The main reason is because `cs` property
is initialized using a compound literal, something not supported in C++.
This PR takes another approach, that is to not make `cs` a pointer but a
struct member. This way, we can perform a regular initialization, at the
cost of using extra memory for unused delay/pin/flags if `cs` is not
used.
Fixes#56572
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The rvm32m1 platform always uses pinctrl, there's no need to keep
extra macrology around pinctrl. Also updated driver's Kconfig to `select
PINCTRL`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The MCUX platform always uses pinctrl, there's no need to keep extra
macrology around pinctrl. Also updated driver's Kconfig options to
`select PINCTRL` (note that some already did).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When using a dummy buffer on the RX side, do not
increment the destination memory buffer address.
This issue was uncovered when running the SPI
loopback test.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The spi-sam0 driver does not initialize DMA parameters when the MCLK
peripheral is defined in the microcontroller header file. Fix it by
copying the initialization code from the non-MCLK case.
Signed-off-by: Brandon Del Bel <delbel@umn.edu>
This adds the SPI driver for the Renesas SmartBond(tm) DA1469x MCU family.
The driver only supports controller mode. All four SPI modes are supported.
Note that the lowest supported speed is 2285714Hz.
Requesting speeds higher than 16MHz, will result in a 16MHz SCLK.
Co-authored-by: Stan Geitel <stan@geitel.nl>
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Zephyr SPI driver model for full-duplex operation assumes
data will be transmitted and received during each clock period.
The QMSPI driver for the XEC family also supported dual and
quad I/O use cases which are inherently half-duplex. To
support dual/quad the driver incorrectly processed spi buffers
as all transmit buffers first then all receive buffers. This
worked if only the SPI driver was used. It did not work with
the Zephyr flash SPI NOR driver which assumes SPI drivers
follow the SPI driver model. This commit implements a QMSPI
driver that follows the Zephyr SPI driver model resulting in
a slightly smaller driver. Dual/quad SPI transactions are
supported if the experimental SPI extended mode Zephyr
configuration flag is enabled. We also remove the QMSPI full duplex
driver added previously to support the flash SPI NOR driver.
Added board to spi loop-back test and spi_flash sample.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
There have an extral TBE interrupt event though we have cleared the
SPI_CTL1_TBEIE bit. To cover this situation, add a on_going check
before enter exchange function.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
