The uart_pipe driver is not dependent on any console driver,
however a serial driver is required.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Update the broadcast_sink_test to use ISO to sync to the
broadcast source BIG, testing both the syncing functionality
as well as the sync stop and delete functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the state transition from connecting to disconnecting
as a valid transition for ISO. This can occur if a ISO channel
is disconnected before it is fully connected, of if a BIG
or a BIG sync is terminated before established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is a brief period between the bt_iso_big_create
and when the ISO channels are established. In this state
it should be possible to call bt_audio_broadcast_source_stop
to stop the BIG from being created.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Both idle and suspend states were just being used to set the cpu
idle. That is not necessary, if the pm policy does not find a suitable
power state the kernel automatically calls k_cpu_idle().
This remove unnecessary code and the weirdness of having
min-residency-us set to 0 and other arbitrary values.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
1. Improve the firmware transfer reliability by fixing the misuse
of the socket. Fix the most frequent occurence of the common `recv()`
bug described here:
https://docs.python.org/3/howto/sockets.html#using-a-socket
The longer term fix is to switch to a higher level API like Python
Remote Objects.
2. Not rely on the client's command to disconnect. Previously we
rely on the SIGINT to send stop_command to the server, but it does
not work well in some environments. Refine the whole logic and the
sever disconnect service by checking if the client is alive or not.
These changes make the client-server-based cavstool more stable.
Fixes#46864
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
The addition of the assumption API introduced a bug where a skipped test
would subsequently skip later tests within the same suite. A skipped test
was being treated as an entire skipped test suite.
Keep track of tests being skipped due to skipping in the suite setup versus
being skipped within their test function.
TEST=west build -p -b native_posix tests/kernel/condvar/condvar_api/ -t run
TEST=twister -T tests/ztest -p native_posix
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Header soc.h is included during C++ source file compilation
and required adding C++ casts as implicit casting from void*
is forbidden. Fixed minor warning comparing signed with unsigned
integer.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Replaced hardcoded for intel_adsp_ace15_mtpm board
HP_MEMORY_BANKS value used in SOF code with generic approach -
using PLATFORM_HPSRAM_EBB_COUNT read from Devicetree.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Properly prefixing some include files with "zephyr", also organizing
the order they are included.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
These two timers were sharing pretty much the same code. Actually
mtl timer was a "superset" of cavs timer. Just merge them into a
single one called intel audio dsp timer (intel_adsp_timer).
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Do not duplicate code in new SoC and reuse code from intel_adsp/common.
Move SRAM code into own file in common code and setup SRAM in soc for
MTL platform.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch implements pm_state_set function for ACE platforms.
This is initial implementation and only includes the basic handling of
PM_STATE_SOFT_OFF.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch add soc_adsp_halt_cpu implementation for ace. Function disable
power and check CPA status to report success. Function should be used only
for secondary cores and can be executed only from primary core.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Poll for CPA bit by which HW confirms that the core has been powered up.
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Co-authored-by: Tomasz Leman <tomasz.m.leman@intel.com>
Co-authored-by: Andrey Borisovich <andrey.borisovich@intel.com>
Add ace/mtl rom flags definitions.
Set the flags in battr to indicate to rom that it should execute
secondary core procedure.
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Co-authored-by: Andrey Borisovich <andrey.borisovich@intel.com>
Board definition for the meteorlake platform.
Enable intel_adsp_ace15_mtpm in the sof sample.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Co-authored-by: Michal Wasko <michal.wasko@intel.com>
Co-authored-by: Konrad Leszczynski <konrad.leszczynski@intel.com>
Meteorlake support as part of the Intel ADSP family.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Co-authored-by: Michal Wasko <michal.wasko@intel.com>
Co-authored-by: Konrad Leszczynski <konrad.leszczynski@intel.com>
Co-authored-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Co-authored-by: Enjia Mai <enjia.mai@intel.com>
Co-authored-by: Flavio Ceolin <flavio.ceolin@intel.com>
Co-authored-by: Tomasz Leman <tomasz.m.leman@intel.com>
Co-authored-by: Bonislawski Adrian <adrian.bonislawski@intel.com>
Co-authored-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
Co-authored-by: Andrey Borisovich <andrey.borisovich@intel.com>
This will add ace compatible DMA driver.
Co-authored-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add timer driver based on CAVS driver and adapted for Meteor Lake.
Co-authored-by: Michal Wasko <michal.wasko@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add TLB driver specific for Meteorlake.
Add missing kconfig resource and fix include path
add hpsram power up and ref counter
Use memblock to track physical page usage in mtl tlb driver. The
applications that will be using the tlb memory driver should not
track the physical page mapping to virtual address space:
- adds an option to use the phys argument value of 0 to tell the
driver to autonomously assign physical pages upon map request
- makes the tlb driver use memblock to track mapped physical pages
Co-authored-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Co-authored-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Co-authored-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Co-authored-by: Michal Wasko <michal.wasko@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When LOG_MODE_IMMEDIATE is used, logs processed by the shell
log backend may be intertwined with messages printed by
shell commands running on the shell thread.
It is because the shell uses a mutex while the shell log
backend uses the IRQ lock for synchronization. Switch the
latter to use the mutex as well whenever it's possible.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
The use of DT_BUS_LABEL in a logging call can easily be replaced
with uart_dev->name. This moves us slowly forward to removing
use of devicetree `label` property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Also, Removed 'lsm6dso' from board & sample yaml's and move to just
filtering based on devicetree compat.
Signed-off-by: Kumar Gala <galak@kernel.org>
Removes the ability to enable the FPU with TF-M -- added in
PR #45906, and which is causing CI failures -- until a more
robust solution can be implemented for FPU support w/TF-M.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
