Add specifying the port for the remote cavstool remote service.
Ex.
west flash --remote-host {host}:{port} \
--pty {host}:{port}
Specify the port is optional when running west.
And another major change is now we have to specify the remote log
service by --pty to make it output the log message immediately.
Previously it will output directly. Why we make this change is
because this is more close to the behavior we use west flash.
Fixes. #46865
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
qemu_riscv32.overlay adds a device node for the ite,it8xxx2-bbram
which doesn't make any sense since for qemu_riscv32. Just remove
the file.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that bbram drivers are enabled based on devicetree we can
remove any cases of them getting enabled by *.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
The binding 'nxp,lpc-iap' is no longer used, which is confirmed
by running:
$ find ${ZEPHYR_BASE}/dts/arm/nxp -type f | egrep -e '\.dts(i)*$' | \
xargs grep -nH nxp,lpc-iap
Changes in this commit:
- remove DT_HAS_NXP_LPC... in drivers/flash/Kconfig.mcux
- remove schema file for nxp,lpc-iap
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
The lpc and mcux drivers' DRV_COMPAT is updated for the new bindings
introduced in the previous commit. The drivers' Kconfig files also
reflect this change (DT_HAS_ENABLED_NXP_...).
The SoC device trees are updated with the new bindings
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
The binding 'nxp,iap-lpc' is used for different flash controllers,
preventing clarity. This commit introduces bindings for each version of
the flash controller, as they appear with NXP lpc device families:
nxp,iap-fmc11: for the flash controler used on the lpc11u6x family
nxp,iap-fmc54: for the flash controler used on the lpc54xx family
nxp,iap-fmc55: for the flash controler used on the lpc55xx family,
except lpc553x
nxp,iap-fmc553: for the flash controler used on the lpc553x family
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
The names of these peripherals in the device tree
did not match the Reference Manual for the RT600.
Added alias for usdhc0 to be able to use SDHC test.
Also fixed a typo in a comment referring to USDHC which should have been
about USB.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Extended Advertising is no longer experimental, it has been now
extensively tested and is fully qualifiable and usable in production.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Explicitly set the newly add public_network and iq_inverted settings
in lora_modem_config in the lora send and receive samples.
Signed-off-by: Tim Cooijmans <timcooijmans@gmail.com>
Add support for setting sync-word and iq-inverted in lora_modem_config. By
being able to set the sync-word it's possible to send "raw" public-network
packets using lora_send and using iq-inverted both uplink and downlink
messages can be sent.
Signed-off-by: Tim Cooijmans <timcooijmans@gmail.com>
code to demonstrate the utilization of assymetric
dual core infrastructure based on soft-IPM implementation.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
Fixes a bus fault observed in samples/boards/reel_board/mesh_badge
caused by dereferencing an uninitialized device pointer in the apds9960
sensor driver. The device pointer needs to be initialized regardless of
how CONFIG_APDS9960_TRIGGER is configured.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Timeout must be increased because enabling MPU on this board reduce the
performance of the FVP.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Partially revert commit 0028e9733295316d152eba07bf56677d83f4b1b5.
Timeout for tests/posix/common must be still increased for slow
platforms (previously was 120 sec).
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
* Convert device_get_binding to DEVICE_DT_GET
* Convert Kconfig RPMSG_SERVICE_SHM_BASE_ADDRESS and
RPMSG_SERVICE_SHM_SIZE to DT_REG_ADDR/DT_REG_SIZE
Signed-off-by: Kumar Gala <galak@kernel.org>
This updates the lvgl revision in west.yml. We've merged several
changesets since the last update:
- avoid using the arial font due to licensing issues
- add Kconfig options for GridNav
- fix flicker with partial display updates
- fix an issue with fs_open
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
This patch introduces the basic infrastructure to list and fetch binary
blobs. This includes:
- The new 'blobs' extension command
- An implementation of the `west blobs list` command
with custom formatting
- A very simple mechanism for loading fetchers
- A basic implementation of an HTTP fetcher
In order to ensure consistency among the west extension commands in the
main zephyr tree, we reuse a similar class factory pattern that is present
for ZephyrBinaryRunner instances in the ZephyrBlobFetcher case. This
could be achieved with a simpler mechanism, but opted for consistency
before simplicity.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of using strings, use pathlib's functionality to handle the
fact that it can have two different extensions.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
* Reworked the stm32 SDRAM test to be more generic
* Added SRAM entries
* Moved to new ztest API
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit enables the SRAM controller is66wv51216dbll connected
to the SMC/EBI bus. Half of the memory is made available (512KB)
on chip select 0, the other part is (512KB) on chip select 1.
The SMC timings are taken from the Microchip studio example
SMC_SRAM_EXAMPLE for the sam4s_xplained board.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add pinctrl definitions for the SMC peripheral (8) and add the
module to the sam4e soc.
IDs and addresses are taken from the datasheet.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The LE Audio related profiles define specific security requirements that
client have to met to gain access to related characteristics. This
introduces internal wrapper API for GATT characteristics and CCC
descriptors to ensure the security.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This makes the server endpoint to store the ASE pointer instead of
handle. This way, there will be no need to "mock" attribute when
notification is sent.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This extends the bt_conn_info with security information. This is needed
by LE Audio profiles to check if security requirements are met.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The bt_conn_get_security and bt_conn_enc_key_size do not
modify the conn thus the parameter can be guarded with const modifier.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Adds flag indicating the pairing that was completed using OOB method.
The flag is needed for checking 128bit entropy pairing required by LE
Audio services.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes crash that happened when client initiated Release operation
on ASE in Idle state. In such case the operation shall be rejected with
Invalid ASE State Machine Response_Code.
Fixes: ASCS/SR/SPE/BI-10-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The SSD16xx driver currently hard-codes a couple of register overrides
that aren't relevant or even correct for many devices. Make them
optional device tree properties instead.
Note that this changes the behavior for panels that expect
SSD16XX_CMD_DUMMY_LINE and SSD16XX_CMD_GATE_LINE_WIDTH to be set by
the driver. This fixes a bug where the incorrect value
was written to all SSD16xx panels except for GDEH0213B1 and GDEH029A1.
The overlay files for devices that need dummy line and gate line width
to be specified have been updated as a part of this commit.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
The OTP in most SSD16xx-based displays normally contain default
VCOM/GDV/SDV values. Make all of these optional in the device tree.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
