Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Erase operations must be aligned to the erase-size.
- Don't need to perform an alignment check on a full erase. The offset
is not used in this case.
- Don't need to perform alignment check on a sector sized erase, as
this alignment is checked on entrance to the function.
- Removed some whitespace.
Signed-off-by: Ryan C Johnson <ryan.johnson@flex.com>
This commit adds the default configuration to the flash_simualtor
to allow unaligned reads.
Disable this option when testing to increase test coverage.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore part of the data that is written to the simulated flash memory.
This parameter works together with max write calls parameter.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore erases to the simulated flash memory after a certain number
of flash erase calls has been executed.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore any writes to the simulated flash memory after a certain number
of flash write calls has been executed. This behaviour is useful for
simulating power down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the maximum possible number of sections that track statistics
for each flash page.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Statistic for flash has limitation regards number of pages possible to
be counted. This path introduces check for that in source file as it is
not possible to preserve the limit in Kconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This commit adds a flash driver implementation that writes to RAM and
exports statistics through stats.h. It can be used to simulate flash
memory for testing purposes.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Make sure that when e.g. CONFIG_SERIAL is set, CONFIG_UART_SAM0 is
selected automatically when the sam0 SoC family is used.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
nRF9160 can't provide FICR data while operation in non-secure
domain.
This patch start using flash layout properties provides by
nrfx API for get flash properties, which resolves problem
described above.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce nrfx_nvmc driver into nordic flash driver implementation.
Thanks to that nrf9160 SoC becomes supported by the driver.
nrfx helps dealing with differences with interface to the NVMC
in secure and non-secure execution modes.
This patch adds NRFX_NVMC Kconfig entry for enabling nrfx_nvmc and
select it along with nordic flash driver.
Disabled UICR operation on nRF9160 for non-secure build
as UICR is not available in this mode.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
An external project extending the Zephyr RTOS and its drivers may have
subsystems that must use its own specific driver(s) when active. One
example is the nRF5x NVMC that must be scheduled in between radio
operations. A subsystem may also be dependent on its own drivers for
security, real-time and/or because of hardware constrains.
In order to not introduce non-Zephyr specific code into the Zephyr tree,
an option is added to disable the in-tree drivers in Zephyr. Because
Kconfig does not support a good way of de-selecting other symbols, a
variable on the form `<DRIVER>_FORCE_ALT` is added as a
dependency for each `<DRIVER>`. For example, the out-of-tree subsystem
will select `FLASH_NRF_FORCE_ALT` to disable the in-tree driver. A
solution for issue #8181 would open up for a more general solution,
however #8181 requires significant effort.
Support for out-of-tree drivers is added to Nordic drivers for
clock_control, entropy and flash.
A generic solution for this is desired. Issue #14527 is tracking that
progress.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Disable the data cache before writing to Flash, in order to workaround
silicon errata 2.2.3: "Data cache might be corrupted during Flash memory
read-while-write operation". The data cache is conditionally re-enabled
once the write is completed.
This silicon bug has been encountered while stress testing the
implementation. Here are the events leading to the fault:
- Code is executing from Flash bank 1
- A write to Flash bank 2 is initiated
- The Cortex SysTick interrupt fires while waiting for Flash write
completion
In that case, the Flash controller will perform a read-while-write
operation in order to execute the ISR code. As the data cache is enabled
by default after reset, a corruption occurs due to the silicon bug,
leading to bizarre data bus faults or unaligned access faults inside
_timer_int_handler() or one of the functions called by the ISR.
Applying the workaround devised by ST fixes the problem.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
On STM32L4, flash writes operations are performed 8 bytes at a time.
Though, it is possible that *data in flash_write functions is not
aligned. To avoid issues, use UNALIGNED_GET macro to access *data.
Issue has been detected using settings subsystem on STM32WB, which has
same 8bytes write block size. The patch is extended to STM32L4 series
for same reason.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32F3 devices, a trick was required for normal use of registers.
This was actually an issue in flash registers defintions which should
be defined as volatile.
Fix this and additionaly, fix definition for STM32F1 which was also
lacking the volatile instruction.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Redefining the config will not let another (out-of-source) driver be
chosen instead of the default. The driver is practically forced by the
soc settings. This commit moves default settings from soc/arm/nordic_nrf
into the drivers themselves.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
These are from source'ing a file within an 'if FLASH', and then adding
another 'depends on FLASH' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. There are no "conditional includes" in Kconfig, so
'if FOO' has no special meaning around a 'source'. Conditional includes
wouldn't be possible, because an 'if' condition could include (directly
or indirectly) forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adds a new config HAS_MCUX_FTFX to conditionalize the mcux flash driver
on socs that support it. Selects HAS_MCUX_FTFX on all kinetis socs
except kw40z, because even though this soc has the relevant hardware,
its CMSIS header file is not compatible with the mcux flash driver in
ext/.
This change also prevents enabling the mcux flash driver on lpc and imx
rt boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Same change as in commit 8cf8db3a73 ("Kconfig: Use a short, consistent
style for prompts"), fixing stuff that got introduced since then.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
A common driver is shared between stm32 chips, which was not the case
for stm32f3 series. As a consequence stm32f3 was not maintained
equally and was missing features such as flash layout or dts based
configuration.
Besides, drivers had some flows such as wrong bus clock and
missing HSI clock activation which lead to issues on boards not
using HSI as main clock.
As a consequence this commit moves stm32f3 series flash driver to
common stm32 flash drivers.
Fixes#4197
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the nrf options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the mcux options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the nios2 options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The patch 44758977f8 made a change where
SECTORS_COUNT was not calculated properly. This patch corrects it.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Convert generic FLASH_{WRITE,ERASE}_BLOCK_SIZE to driver specific
generated define DT_JEDEC_SPI_NOR_0_{WRITE,ERASE}_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert generic FLASH_WRITE_BLOCK_SIZE to driver specific generated
define DT_SOC_NV_FLASH_0_WRITE_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert generic FLASH_{WRITE,ERASE}_BLOCK_SIZE to driver specific
generated define DT_SOC_NV_FLASH_0_{WRITE,ERASE}_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert generic FLASH_ERASE_BLOCK_SIZE to driver specific generated
define DT_SOC_NV_FLASH_0_ERASE_BLOCK_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
