Remove the locally MSI/MSI-X capabilities ID define and use the
newly introduced one from the PCI Code and ID Assignment
Specification Revision 1.11 document header.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Extend the PCIe API to find Extended Capabilities in the PCI Express
Extended Capabilities located in Configuration Space at offsets 256
or greater.
Note: the Root Complex Register Block is not supported
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
enable spi driver to support dspi edma
add support for shared dma mux spi port
for shared spi port we need judge the irq source
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The additional depends on SOC_FAMILY_SAM was redundant.
Add sam4l_ek to dfu sample exclude since it was failing on
arduino_due.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
IRQ_CONNECT macro last argument is architecture-specific flag,
but now there is instance id at this place.
This PR set architecture-specific flag to 0.
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
Atmel sam0 adc peripheral have multiple interrupt vectors for same5x
devices. This configure interrupt vector by name to ensure that proper
interrupt handle will be executed.
Fixes#37779
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The Kconfig refactor that replaces some single-symbol 'if's with
'depends on' added a second entry. That entry allows flash driver
be selected for SoC's without support. This fixes the 'depends on'
entry to allows only SAME/V SoCs.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The code was wrongly calling DMA_Abort on a channel
that not initialized. This fixes Issue#38078
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Position over LTE (PoLTE) can be used to locate a device as
an alternative to GNSS.
Increase RX thread stack size for PoLTE processing.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow application control for starting modem driver.
This allows network attach to be randomized.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
So fare flash simulator had been forced to use the statistic
subsystem.
This patch introduces CONFIG_FLASH_SIMULATOR_STATS which allow to select
whether the statistic is involved in flash_simulator operations.
This patch allows to reduce flash footprint when the statistic is
not required.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For getting the address of the RAM region in the application we need to
extend the api for the flash_simulator.
This path introduce flash_simulator_get_memory() call which allow to
do so.
Signed-off-by: Sigvart Hovland <sigvart.m@gmail.com>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fixes the issue where uart_sam0_irq_tx_ready would return true if
the INTFLAG was set even though the INTSET bit for the given
interrupt was not enabled yet through uart_sam0_irq_tx_enable.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
For low power operation, set the IP connection reconfig
flag when receiving a startup report.
This will ensure the GPRS connection is reconfigured
before any socket operations take place.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow the driver to run if a SIM card is not present.
This allows public HL7800 APIs like firmware updates
to be used even if no network is available.
Remove duplicate query ICCID command.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
This changes "__nocache K_HEAP_DEFINE()" to use the new
K_HEAP_DEFINE_NOCACHE() macro. This fixes a build error
as K_HEAP_DEFINE() is specifying its own linker section
so that it is no longer possible to specify another
linker section.
Fixes#38108
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For some reason, XCC fails to build complaining segfault
during CGPREP phase. Adding an assignment to a volatile
return value seems to fix this. This provides an easily
revertable commit to workaround the issue.
Fixes#37734
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When ack data for extended address is set with the
nrf_802154_ack_data_set function, the extended address
must be reversed to the IEEE 802.15.4 address transmit
order in order to be properly matched.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Error handling was missing in numerous places, mostly on GPIO related
callbacks. Some error codes were not correct (-EINVAL vs -ENODEV) and in
some cases error was not propagated correctly.
Fixes#38117
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Error handling was missing in numerous places, mostly for GPIO related
callbacks. An assertion has been used in the context of thread callback.
Fixes#38132
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Apply the same fix in bd8afe9365
(" drivers: sensor: clean up zephyr_library calls") to remove
redundant code in the sensor driver build system files. Additional
instances of the antipattern have crept in.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The result of temperature and relative humidity ticks ranges from 0 to
65535 which is the range of a uint16_t variable. Intermediate tmp
variable type has also been adjusted.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The max-erase-time property was introduced for the STM32 flash driver,
but it was inserted as an optional property in the generic
soc-nv-flash binding which is used by other SoCs.
Make it a required property in a new st,stm32-nv-flash binding
instead, since it is at present a vendor specific property.
Update the DTS files accordingly. Keep the existing "soc-nv-flash"
value in the compatible list in each case, so that DT_HAS_COMPAT(...
soc_nv_flash) tests on these nodes will still succeed, but put it
after a newly added "st,stm32-nv-flash" compatible, so that the
SoC-specific binding will be used as it is discovered first by the DT
tooling.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add logging for NRFX_USBD_EP_ABORTED event inside
control transfer events handling, otherwise "Unexpected event"
error message in this regard confuses the users.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Note that the it8xxx2 does not support a status register so that
functionality is omitted.
This change also adds driver tests that build both the npcx and it8xxx2
drivers.
Signed-off-by: Yuval Peress <peress@chromium.org>
There was a typo that snuck into the bbram driver for npcx.
Fix the driver and update the Kconfig to automatically include the
driver if the compatible string exists in the dts. This ensures that
the driver is built when building the npcx evbs.
Signed-off-by: Yuval Peress <peress@chromium.org>
Change IPM_STM32_HSEM Kconfig definition so that it picks the correct
default automatically depending on which cpu node is enabled in the
device tree, rather than relying on board specific Kconfig overrides.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This changes pci_msi_enable() to take IRQ number as a function
parameter. The old behavior relies on putting the IRQ number
into the interrupt line register in the PCI config space
during IRQ allocation, and reading it back when enabling IRQ.
However, the interrupt line register is only required to be
read-/writable when legacy interrupt is supported on the device.
Otherwise it has undefined behavior. On ACRN, they don't even
care about this register and always wires it to 0x00.
So this commit changes the behavior in pci_msi_enable() to not
require reading back the interrupt line register and instead
takes the IRQ number via function parameter.
Fixes#36765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
by including interrupt allocation feature whenever an Xtensa-based
Espressif SoC is selected.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
