ADC emulator is designed to be used in tests on native_posix board. It
supports 1-16 bit resolution range and all GAINs from enum adc_gain.
Reference voltages and number of emulated channels are set through dts.
Using special API from drivers/adc/adc_emul.h it is possible to set
constant voltage value returned by given ADC channel or set custom
function which allows to simulate complex output.
Also reference voltages can be changed in runtime using the API.
The CL also includes:
- Add adc definitions of ADC emulator in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
- Add test for ADC emulator API in tests/drivers/adc/adc_emul/
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
This commit implements the volume control service (VCS) and
client, The implementation supports and uses the
Audio Input Control Service (AICS) and
Volume Offset Control Service (VOCS) secondary services.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The USB HID class API offers the possibility to register callbacks
for Get/SetIdle, Get/SetProtocol to the application.
Rules for these callbacks are neither obvious nor documented.
This patch remove this possibility to register Get/SetProtocol
and Get/SetIdle callbacks for the following reasons:
The possibility to call unknown application code while processing
control requests should be avoided or reduced to a minimum.
The Get/SetProtocol callbacks are redundant and do not provide any
additional value since the way to inform the application
about the change of the protocol exists via the callback
hid_protocol_cb_t protocol_change.
The core provides implementation to handle Get/SetIdle requests and
on idle reports. If this is not suitable in any way then the application
should implement everything itself.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The HCI specification creates additional complexity to allow this
configuration:
- When a connection gets established, we need to know which
identity the HCI_LE_Connection_Complete event corresponds to.
- The identity is a property of the advertising set.
Therefore we need the advertising handle.
- The advertising handle is part of the
HCI_LE_Advertising_Set_Terminated event and is not part of
the HCI_LE_Connection_Complete event. Therefore
the information of both events needs to be combined.
By spec the LE_Connection_Complete comes first. Therefore we cache
this event until the identity is available.
The event is only cached when a connection gets established as
that is the only case where we need to resolve the identity.
As the caching requires more resources, it is only enabled if the
application requires multiple advertising sets and multiple
identities.
The host maps the HCI_LE_Advertising_Set_Terminated event with
the HCI_LE_Connection_Complete event by comparing the connection
handles.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Prepare for Cortex-R MPU support by moving the MPU headers to the
aarch32 common directory. Add compat headers to ease the transition for
the Cortex-M external modules.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Rename LE Read Buffer Size v2 struct members to related to
Bluetooth Specification use Length and Number terminology.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements the OpenThread APIs to configure Enhanced-ACK
Based Probing in radio for a specific Initiator. This is needed for
Link Metrics functionality.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Add new callback to periodic advertising sync callback.
The callback may be used to receive notification about CTE
reports in connectionless mode (periodic advetising sync).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add functions that give possibility to enable or disable
CTE receive and sample in connectionless mode.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add connectionless CTE RX feature to list of features supported
by controller. Add direction finding initialization in hci_core
if the feature is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add HCI_LE_Connectionless_IQ_Report event that will allow controller
to report received CTE and provide collected IQ samples to host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new command HCI_LE_Set_Connectionless_IQ_Sampling_Enable that
will allow host to enable CTE sampling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
All commands are put in the file according to OpCode Command Field
increasing order. bt_hci_cp_le_set_cl_cte_tx_enable was written in
wrong position. This commit moves it to correct one.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Update the documentation for L2CAp Connection oriented channel send
function to include better description of the L2CAP PDUs (Basic frames)
and L2CAP SDUs (Credit-based frames) so that the application can better
understand how to size the buffer pools and setting the RX mtu.
Document stack behavior on RX path and how the application has to
set up the channel in order to receive segmented packets.
Document stack behavior on TX path for reserving either mandatory or
optional header bytes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add macros for calculating buffer sizes, accounting for the various
L2CAP and HCI headers needed as well as the reserved bytes needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit implements the missing OpenThread APIs related to CSL
receiver configuration.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Update RFCOMM to use the new delayable work API for the RTX host timer
used for disconnecting and idling.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use `pm_device_*` prefix for the device runtime PM API. This adds the
API to the `pm` namespace, making it clear part of the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Move PM related APIs to `include/pm` so that it follows API `pm_`
prefix namespace. In order to make transition easier
`include/power/power.h` is kept pointing to `include/pm/pm.h`.
- Move most of device PM related content from `include/device.h` to
`include/pm/device.h` and `include/pm/runtime.h`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix definition condition for APB1 and APB2.
These were not visible until now as defaulted
in Kconfig.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In prts of the code, we use rcc node "clocks" property to testify the
use of device tree for clocks configuration.
This doesn't work in case of stm32h7 m4 targets as for those,
"upstream rcc" clock configuration, such as sysclk source selection,
is done on m7 core and hence rcc node doesn't have a "clocks"
property.
To work around this, use alternate "d1cpre" property in case of
stm32h7 targets.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following introduction of dts based driver configuration (cf #34120,
#32609 and #34701), deprecate Kconfig symbols by generating a warning
when one of these symbols is used.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit implements the OpenThread APIs to configure a radio
reception slot at a specific time. This is needed for the correct
functioning of a CSL receiver.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
These helper macros avoid boilerplate when constructing a gpio_dt_spec
structure from optional devicetree properties.
Update the release notes while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use device_usable_check instead of device_is_ready so we can propagate
back whatever error that device_usable_check() determined to the caller
of the clock API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit implements the OpenThread APIs to pass MAC keys and
frame counter to the radio layer in order to process the
transmission security. This is needed for the correct functioning
of a CSL transmitter.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
