Adds support for private beacon sending and receiving.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add test that sends longest possible PDU with slowest possible timings
and default retransmission values.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Test that a maximum length SDU can be processed with SAR
with "stressed" transmitter and receiver configurations.
Signed-off-by: Stine Akredalen <stine.akredalen@nordicsemi.no>
Add Transport SAR Configuration models to shell.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add support for:
- SAR Configuration Client and Server models
- Transport SAR configuration states
- Using SAR Transmitter/Receiver states in segmentation
and reassembly process.
Bsim tests fixes:
- Fix failing replay attack test. The replay attack test doesn't
consider retransmission attempts at the transport layer. When
retransmission happens, SeqNums get increased and the test logic
doesn't work anymore. The simplest fix would be to disable
retransmissions at the transport layer.
- Add device synchronization API to synchronize transport va test.
Device configuration may take different time on transmitter and
receiver. Add synchronisation barrier between devices.
- Fix msg_frnd test. Timing in transport sar behavior has been
changed, which affected test_friend_msg test. Now acknowledgments
are sent much faster and this needs to be considered in the test.
- Fix unicast_low_lat test. Increase number of retransmission
attempts when long segmented message is sent.
- Reduce timeout in kr_old_key test.
- Relax SAR RX state configuration in DFU and BLOB tests.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Adds Large Comp Data Server and Client
- Defines some dummy metadata for Health Server
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Adds Large Composition Data Server and Client definitions
- Adds Client API definition
- Adds Health Server Metadata definition
- Refactors Composition Data processing (as a Server) to use common
methods with Large Comp Data Server
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Stine Akredalen <stine.akredalen@nordicsemi.no>
Co-authored-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Test Dev Key Refresh, Node Composition Refresh and Node Address Refresh
procedures for robutness.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds commands in the mesh shell for remote provisioning client
operation, including scanning, provisioning and reprovisioning.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds remote provisioning models rpr_srv and rpr_cli, and exposes them as
a bearer for the provisioning process.
The remote provisioning models provide the following features:
- Remote provisioning of new devices, using a remote provisioning server
as a proxy.
- Reprovisioning of existing devices, generating a new device key and
changing addresses and composition data.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Composition data page 128 represents the new composition data after a
composition refresh procedure. The implementation stores the old
composition data (before applying a DFU or similar), and uses that as
page 0 if present. As the device has already rebooted by the time page
128 becomes active, its active composition data is page 128, while the
backed up data is the "old" data, which should be shown as page 0.
Co-authored-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds several BabbleSim tests for BLOB transfer:
- A sanity test checking that BLOB Transfer completes successfully in
both, Push and Pull modes that runs transfer for 4 targets
- blob_cli_trans_resume test for Pull mode
- Test checking that BLOB client continues BLOB transfer if one of
targets times out while sending chunks.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add a test where distributor is a single target and performs self
update. Add a test where distributor performs self update with multiple
targets.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Check that DFU client continues DFU procedure as long as there is at
least one active target.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Tests that BLOB Client suspends if no target responds to Block get.
- Tests that BLOB Client transfer ends if no target responds to Xfer
get.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Tests that BLOB Client continues the Push BLOB Transfer procedure
as long as there is at least one active target.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This commit implements the following tests:
- Test that DFU finishes successfully with all different effects;
- Test that DFU fails at confirm step with all different effects;
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add bsim test for resuming push & pull mode transfer on the BLOB client
after BLOB server has been suspended during initial attempt.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This updates some of the defaults in the mesh shell's config to allow
various Mesh 1.1 models to be used in the shell.
EPA provisioning and DFU requires much larger multisegment messages,
therefore support for maximum sized message is enabled by default and
stack sizes are increased working values.
Additionally, log buffer is increased and thread sleep time is reduced
to avoid dropping of useful logs.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds conditional support for the BLOB and DFU models in the mesh shell.
Additionally creates a dummy BLOB stream for testing.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for the Device Firmware Distribution Server model from Mesh
Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds DFU models from the Mesh Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for the BLOB Models from Mesh Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Implementation of the enhanced provisioning authentication (EPA)
that is based on SHA256 and HMAC security algorithms.
OOB authentication mandates EPA usage.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add ability to run bsim mesh for both ble mesh versions
v1.0.1 and v1.1
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
All mesh 1.1 features are gathered behind a KConfig options.
Default is disabled.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add a callback similar to net_recv that notifies the application when a
message is received in access layer. This is is useful for testing
purposes (especially automated testing).
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This prevents a Configuration Client from binding an app key to a model
that only supports DevKey-based security.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Mesh Profile Specification Errata 11341
3.6.4.3 Message error procedure
When the Upper Transport layer receives a message that is not
understood, then the message shall be ignored.
A message that is not understood includes messages that met one or more
conditions listed below:
• The Transport Control message opcode is unknown by the receiving node.
• The Transport Control message size for the Transport Control opcode
is incorrect.
• The Transport Control message parameters contain values that are
Prohibited
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Mesh Profile Specification Errata 11302
Section 3.5.5.
When a Friend node receives a message that is destined for a Low Power
node (i.e., the destination of the message is a unicast address of an
element of the Low Power node or in the Friend Subscription List), and
the TTL field has a value of 2 or greater, then the message shall be
processed as follows: If the Friend Queue already contains a message
with the same SEQ and SRC fields as in the received message, or if the
SRC field of the received message is a unicast address of an element of
the Low Power node, then the message shall not be stored in the Friend
Queue. Otherwise, the TTL field value shall be decremented by 1, and
the message shall be stored in the Friend Queue.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Mesh Profile specification errata 11627
Section 3.10.5:
When a node is added to a network, the node is given an IV Index.
If the node is added to a network when the network is in Normal
operation, then it shall operate in Normal operation for at least
96 hours. If a node is added to a network while the network is in
the IV Update in Progress state, then the node shall be given the
new IV Index value and operate in IV Update in Progress operation
without the restriction of being in this state for at least 96 hours.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Mesh Profile Errata 11392
Section 4.4.3.2.1 Current Fault state:
When the value of a Health FastPublish Period Divisor state is non-zero,
and a Current Fault Fault Array (see Section 4.2.15.1) for at least one
Company ID contains records, an unsolicited Health Current Status
message set to the value of that Company ID and the FaultArray field
containing a sequence of faults representing a sequence of faults in the
Current Fault Fault Array (see Section 4.2.15.1) shall be published
every number of seconds as defined by the value of the Publish Period
divided by the value represented by the Health Fast Period Divisor
state, or every 100 ms (the minimum Publish Period value whichever
is greater.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Mesh Profile Specification Errata 11737 specifies that
Period/Count Log value 0x11 is not defined Log field
transformation in Table 4.1.
Errata 11737 adds value 0x11 to Log field transformation
table with 2-octet value equal to 0x10000 which does not fit into
two octets. This patch changes period calculation to 32-bit precision.
There is also a special case for publication count. If the
log value is equal to 0x11 then the publication count value
should be 0xfffe. When sending Hearbeat Publication Status
message we should return the same value as the one received
in Publication Set so we have to add a case in hb_pub_count_log().
Co-authored-by: Alperen Sener <alperen.sener@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Default config should have all bells and whistles enabled to minimize
number of overlays needed in autopts.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Adds a note on a fixed issue whereby the latest Zephyr SDK
toolchain was not used depending upon hash values in the cmake
registry.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This improves the version checking for the zephyr SDK by searching
for newer versions that the version that was detected. This works
around the issue whereby the versions are contained in files with
MD5 hashes which might be in any order.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Follow-up: #53124
The PR#53124 fixed an issue where the variable `check` was not properly
dereferenced into the correct variable name for return value storage.
This was corrected in 04a27651ea.
However, some code was passing a return argument as:
`zephyr_check_compiler_flag(... ${check})`
but checking the result like:
`if(${check})`
thus relying on a faulty behavior of code updating `check` and not the
`${check}` variable.
Fix this by updating to use `${${check}}` as that will point to the
correct return value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Make sure that the interrupt and event routing enable bits have the
reset values in case the Zephyr firmware image is chain-loaded.
When started by MCUboot, these registers values aren't the reset values,
but then Zephyr initializes them in same way. Yet, when the Zephyr
firmware image is chain-loaded by nRF5 bootloader, they may have values
that cause the scheduler to behave in unexpected ways.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Add support for the Arduino GIGA board, an STM32H747XI based development
board in Arduino form factor, featuring external flash, SDRAM, Bluetooth
and WiFi.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Allow to register a callback function which is called when a firmware
update is canceled by the cancel command.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
