Store Twister command line options in twister.json report as
`environment.options` object. It allows to keep the actual
execution context for test results analysis and history comparison.
A new command line option `--report-all-options` enables to report all
command line options applied, including these set as default values.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
in many platforms, before the debuger flash, the former testsuite
many already executed, so we will see some old testsuite name.
and we should not compare them directly, instead if we compare in
reversed order them we can avoid such mis-judge.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
- Do not set CONFIG_MBEDTLS_ZEPHYR_ENTROPY in
tests/crypto/mbedtls because this can cause test failure on
real devices in which test thread do not have access to
drivers.
- make MBEDTLS_PSA_CRYPTO_RND_SOURCE depending on
MBEDTLS_PSA_CRYPTO_C because it only makes sense when the
latter is defined
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Fix issue 72083. Update path to zephyr.exe binary using
default domain from domains.yaml file.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Pass DIEPTXF address instead of value to sys_read32() to prevent bus
fault when debug logging is enabled.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add a build-time assert for verifying that at least one of the supported
devicetree GPIO properties is present on each compatible devicetree node.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
On this board, the CAN transceivers are not GPIO controlled, but passive,
and should not be represented by the "can-transceiver-gpio" compatible (as
this leads to driver compilation warnings due to missing GPIO properties).
Fixes: c8faa1e380
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Define the xspi node instead of ospi. Note that RCC CCIPR4 register
keeps the OCTOSP1 for clock domain selection.
Change the header file to xspi for the stm32 devices with xspi
peripheral. Keep the flash_controller/ospi.h for bindings compatibilty.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Introduce a XSPI driver to cover the common XSPI peripherals
of the stm32 mcu: X is for single or quad or octo or hexa
SPI bus access to external memories
DMA not supported in this version
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The new bindings for the stm32 xspi is for new stm32 devices with
XSPI peripherals like the stm32h5 serie. This is close to the octo-spi.
Adapt the flash controller constants to the XSPI model especially.
This is done through a new xspi.h definition file.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a simple test intended primarily for checking the nRF temperature
sensor in its nrfs variant but intentionally was made generic enough
that it should be usable with other temperature sensors (after just
providing an overlay) and could be helpful in development of new
temperature sensor drivers, and possibly extended then if needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add driver, together with the corresponding dts binding and node in
the nRF54H20 SoC definiton, for the nRF temperature sensor that cannot
be accessed directly but only through nRF Services (nrfs) layer.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Call `getopt_init()` to reset `state->optind` instead of directly setting
`optind = 1`. The `getopt()` function uses `getopt_state` from
`getopt_state_get` for state handling, so `getopt_init()` should be called
to correctly run the command again.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
According to the `SHELL_CMD_ARG` macro, the `mand` argument of `cmd_dump`
should be 5, including the command name itself, `dump`.
Meanwhile, the `opt` should be 2, as this value describes the optional
field, which is [-w <width>].
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Force `\r\n` byte sequence for newline for the Xtensa simulator console
driver. This effectively mirrors the behavior of the UART console driver.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit makes the devicetrees of the targets that are based on the QEMU
`virt` machine more consistent with the rest of the RISC-V targets in
Zephyr by:
* adding the `riscv,isa` property
* adding a compatible string which uniquely identifies the `virt` core
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Be able to configure the clock frequency during runtime
using `i2c_configure()` and be able to use `i2c_get_config()`
of the i2c api for the esp32.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Added a switch that show failed/error report from the last run.
Default shows all items found. However, you can specify the number of items
(e.g. --report-summary 15).
It also works well with the --outdir switch
Signed-off-by: Kamil Paszkiet <kamilx.paszkiet@intel.com>
Fixes a bug where more than one thread trying to access
different PWM devices can cause erroneous behavior.
Co-authored-by: James Goppert <james.goppert@gmail.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Add a test of FLASH_STM32_EX_OP_BLOCK_OPTION_REG and
FLASH_STM32_EX_OP_BLOCK_CONTROL_REG extended operations for stm32f4.
It verifies that the Option Byte and Control registers are blocked
correctly. The registers can be unlock after reboot, so it is needed
to separate this test from other tests.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Select that the STM32 driver has extended operations feature when
the FLASH_STM32_BLOCK_REGISTERS is set.
It allows using only block registers extended operation.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
For vendor datapaths that do not use a netbuffer to write SDUs
into, the callee of sdu_write currently has to keep track itself
of how much data has been written to the current SDU; This is wasteful
since ISOAL already keeps track of that. Add an sdu_written parameter
to the callback to inform the callee how much has been written to the
current SDU already so the callee can write using the correct offset
Signed-off-by: Troels Nilsson <trnn@demant.com>
This commit adds the token for uploading to codecov.io because codecov now
requires a token and rejects any upload requests without one.
It also updates the codecov-action version from v3 to v4, which is required
for using a "global upload token."
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add support for USDHC0 controller on FRDM_MCXN947 board. This support
was verified using the `tests/subsys/sd/sdmmc` and
`tests/subsys/sd/sdio` testcases. Note that this board does not ship
with the SD header (J12) populated by default, so the user must populate
one.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add USDHC0 node to the mcxn94x devicetree. This node describes the one
instance of the Ultra Secured Digital Host Controller IP present on the
MCXN94x series SOCs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some instances of the USDHC peripheral take longer to reset, and will
timeout with the previous delay of 100 cycles. Extend this delay to 1000
cycles to resolve this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove function for waiting for clock gate, as this is not used anywhere
within the USDHC driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some USDHC IP instances do not have the voltage control bit present, as
they can only operate at 3.3V. Move code to select 1.8V mode into a
separate helper, and guard the call to UDSHC_SelectVoltage() behind a
feature macro from MCUX SDK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The CSI can connect to either a camera sensor (as on i.MX RT10xx) or
a MIPI CSI-2 receiver (as on i.MX RT11xx). To be generic, change the
naming from sensor to source.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Remove redundant `const` qualifiers in `struct modem_cellular_config` and
add `const` to the declaration to ensure the structure resides
in read-only memory (rodata).
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Instead of using floating point operations to compute the vref voltage,
it is possible to use the sensor_value_from_milli() function.
On a STM32G0, this saves 130 bytes of flash, excluding the FP library
needed on a FPU less MCU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of using floating point operations to compute the vbat voltage,
it is possible to do the computation using 32-bit variables by
reordering operations and using the sensor_value_from_milli() function.
On a STM32G0, this saves 140 bytes of flash, excluding the FP library
needed on a FPU less MCU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add HID keyboard sample for the new experimental USB device support.
This is a limited and not fully compliant HID keyboard implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add initial HID device support. Unlike the existing HID implementation,
the new implementation uses a devicetree to instantiate a HID device.
To the user, the HID device appears as a normal Zephyr RTOS device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If the recipient is not the device then it is probably a
class specific request where wIndex is the interface
number or endpoing and not the language ID. e.g. HID
Class Get Descriptor request.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
For upcoming HID support in the new device stack and to provide API
backward compatibility, there must be no conditional definitions in the
header.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add DT node entries to RW for DAC and ADC.
Support the SOC required initialization of the DAC and ADC on RW.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
