This commit introduces MODULE_EXT_ROOT which allows CMake and Kconfig
glue code to be placed outside of the Zephyr module repository.
This allows for placing glue code in Zephyr, but also allows users to
specify custom MODULE_EXT_ROOTs for glue code using either
`-DMODULE_EXT_ROOT` or `zephyr/module.yml` with
`build:settings:module_ext_root` settings.
MODULE_EXT_ROOT' is a list of directories, similar to other roots such
as BOARD_ROOT, DTS_ROOT, etc.
The Zephyr repo folder ${ZEPHYR_BASE} is always to the MODULE_EXT_ROOT
list as lowest priority.
For each MODULE_EXT_ROOT, the file
`<module_ext_root>/modules/modules.cmake` will be processed.
In Zephyr repo, the folder `modules/<module>/` contains CMakeLists.txt
and Kconfig glue code for the Zephyr module.
A Zephyr module can specify that CMakeLists.txt and Kconfig glue code is
placed in an external module root by specifying:
```
build:
cmake-ext: True
kconfig-ext: True
```
It is still possible to place the CMakeLists.txt and Kconfig files
directly in the Zephyr module using the existing:
```
build:
cmake: <path>
kconfig: <file>
```.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Some parts of subsys/dfu/boot code are re-implementations of
what is implemented in the MCUBoot repository.
Mcuboot's repository already provide implementation of function
required for application for interact with the MCUboot.
This patch introduces new MCUBOOT_BOOTUTIL module which covers
common code which is used in the bootloader and the chainnloaded
application.
dfu/boot: use MCUBoot's source code
Module was reworked so it start using MCUBoot's
bootutil_public API instead of copied code.
Reworked boot_is_img_confirmed() used MCUBoot's API
for determine image_ok flag.
mcuboot_shell switchd to use MCUboot's boot_read_swap_state_by_id()
This is MCUBoot function, use it for avoid linking conflict.
test/subsys/mcuboot: fix `test_write_confirm`
dfu/boot library was reworked so it uses MCUboot's bootutil_public
library whenever it can.
The library required that image was marked as copy-done before it
can be pending.
This patch adds such mark which fixes the test.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add the Sound Open Firmware project as a Zephyr module under
modules/audio/sof.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Musca-S1 is a Cortex-M33 based SoC. It's similar to the
Musca-B1, but among other things the embedded flash has
been replaced with embedded MRAM (eMRAM) memory.
The Musca-S1 files have been created based on the Musca-B1
SoC and board files.
Add the Musca-S1 board to the list of allowed platforms
for the TF-M integration examples.
Change-Id: I4f517d28d0a5b8c4a3fc3fab73adb5519acfc3c2
Signed-off-by: David Vincze <david.vincze@linaro.org>
Use new Kconfig structure to marks which TIMER peripheral is reserved by
802.15.4 radio driver. It prevents peripheral usage collisions.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This PR allows the use of direct IEEE 802.15.4 nRF Driver calls
in case a serialized (nRF53) version of the Radio Driver is used.
Signed-off-by: Czeslaw Makarski <Czeslaw.Makarski@nordicsemi.no>
BUILD_WITH_TFM needs to depend on
ARM_TRUSTZONE_M, which is selected
by the SoC or Board definition. In
addition to that we add an imply
statement for INIT_ARCH_HW_AT_BOOT
because Zephyr will be chain-loaded
by TF-M, and needs to cleanup its
core ARCH registers that might be
left in non-reset state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When we select BUILD_WITH_TFM we do not
really need to enable by default the
options THREAD_NAME, THREAD_STACK_INFO,
INIT_STACKS and THREAD_MONITOR, so we can
clean them up. We also remove CMSIS_RTOS_V2
for the same reason.
We also cleanup the default value for
NUM_PREEMPT_PRIORITIES, which does not
seem to be needed.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add STP transport support for MIPI SyS-T with Kconfig MIPI_SYST_STP,
this is following SyS-T spec Section 7.
And with Kconfig MIPI_SYST_RAW_DATA, add raw data output support for
MIPI SyS-T protocol stack.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Add TFM_PROFILE and TFM_ISOLATION_LEVEL options. Options are used to set
up custom board configurations, i.e. LPC55S69 uses medium_profile to fit
TFM images in a small flash area.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Add help text in some newly introduced and un-documented
TF-M Kconfig options: REGRESSION and IPC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add Kconfig options that will be used by the module
to call the function with the desired parameters.
Refactor the tfm_integration samples and
the supported boards.
Update west.yml to bring in Cmake changes that use the new KConfigs.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Make it easier to add TF-M in an app by selecting and implying the
necessary configs so the app doesn't have to specify the configs itself.
Remove unneeded configs from the prj.conf files in the tfm samples.
Also, fix case in key file name.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
With STM32Cube updates
https://github.com/zephyrproject-rtos/hal_stm32/pull/75
'..._hal_rcc.c' and '..._hal_rcc_ex.c' are now systematically
compiled, due to more and more dependencies from HAL IP on rcc.
So USE_STM32_HAL_RCC and USE_STM32_HAL_RCC_EX becomes useless.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Refactors the i.mx rt soc series to enable device configuration data
(DCD) by default when the smart external memory controller (SEMC) is
present. This is in preparation for removing the DATA_LOCATION Kconfig
symbol and using a device tree chosen node instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds the socket option TLS_ALPN_LIST for SOL_TLS sockets
Passes the configured alpn list to the mbedtls config
on mbedtls init
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
Update the default paths to private keys used
for signing the Secure and the Non-Secure firmware,
when building Zephyr together with TF-M. The update
is done to match the default configuration in
the upstream TF-M project.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v1.03.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/5
(merged as b52fdbf4b62439be9fab9bb4bae9690a42d2fb14)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add initial support for LoRaWAN based on Semtech's loramac-node
library. Current implementation only supports OTAA config and
sending data to LoRaWAN server like ThingsNetwork.
While at it, this commit also moves the "loramac-node" library
definition from drivers/lora to subsys/lorawan. This is required
because, subsys/lorawan gets processed before drivers/lora and
that creates issue while building.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
The HAS_NRFX Kconfig option is selected also for the nrf52_bsim board,
where the nrfx drivers are compiled for a simulated target, without
CMSIS. Thus, selecting HAS_CMSIS_CORE in such case is inappropriate.
This patch removes then the selection of the HAS_CMSIS_CORE option from
HAS_NRFX. When the nrfx drivers are built for a real SoC, where CMSIS
is actually used, the option will get selected by the CPU_CORTEX_M one.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When we build Zephyr for a Non-Secure image, using TFM
as the Secure counterpart, we may or may not use BL2 (e.g.
MCUboot in TFM). If we build with BL2 we need to account
for a ROM offset before the start of the non-secure image
where TFM BL2 expects the BL2 header. This offset is not
needed when TFM is built without BL2. We use the existing
Kconfig options to determine whether we need a ROM offset
or not. We use the value of 0x400 for the BL2 header,
which is the default value used in TFM, but the option is
non-hidden, allowing the user to overwrite the default
value if needed.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
On SoCs featuring the USBREG peripheral, the nrfx_power driver uses
the nrfx_usbreg one internally, so enable the latter when the former
is enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This PR updates the hal_nordic module revision, to switch to nrfx 2.3.0
and adds new configuration option to enable two stage LFCLK start
sequence.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
RDC module is used by i.MX8MM SoC, so let's create a Kconfig symbol
which will be used to enable the module in SDK.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
This commit adds a NRF_802154_MULTIPROTOCOL_SUPPORT Kconfig switch
that makes it possible to use nRF 802.15.4 radio driver in
a multi-protocol scenario.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Add support for the SX126x series of LoRa radios using the
LoRaMAC-Node HAL.
This driver currently makes the following assumptions:
* DIO1 is used as an interrupt line.
* There is an RF switch selecting between the TX and RX ports and
that switch is controlled by DIO2.
* There is either no TCXO or the TCXO is controlled by DIO3.
Specifically, the limitations above mean that modules that use GPIOs
to control the RF switch are currently not supported. Support for such
modules would need changes to the LoRaMAC-Node code.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Add initial support for nuvoton numicro m48x SoC series, basic
init and uart functionality are covered with gpio and clock
directly relies on HAL.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Currently user needs to specify quite much additional options to enable
OpenThread support. He also needs to set ip address count,
heap size, etc depending on features enabled.
Nade changes to automatically select/set some of the options on
enabling OpenThread
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
tested on mimxrt1060_evt
MEMORY_NOCACHE is needed
test on frdmk64f
special test slot need configure with
CONFIG_DMA_TEST_SLOT_START
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Due to new checks in mbedTLS config sanitizer, TLS option can no longer
be left enabled, when TLS is not used. OpenThread needs MBEDTLS_MD_C
and MBEDTLS_CIPHER_C even without TLS being used, so we need an option
to enable them manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commits adds a config option to build a PSA trusted-firmware-m
(TF-M) application image for the secure processing environment, and
configures the Zephyr application image for the non-secure processing
environment. The secure and non-secure environment images will be
linked together via the veneer function table that is produced as an
artifact of the TF-M build process.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add infineon xmc series with XMC4500 support. XMC series comes with,
- CPU operates upto 120MHz
- 3 RAM (PSRAM1 - code, DSRAM1 - data and DSRAM2 - communiation)
- upto 1MB flash
init: clock control & gpio is not done, so SoC initialization directly
relies on HAL. Core operating clock is stored in no_init section, which
is kept under DSRAM1. Only DSRAM1 is used until clock support. Using
PSRAM1 and DSRAM1 needs adaptation in linker script - planned for next
revision.
Note: SystemInit cannot be consumed directly due to vector table +
HAL linker dependency.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Both ST and STM32 modules where using same HAS_STLIB Kconfig
symbol.
Now that each module is createing is own lib, we need to be able
to distinguish libs.
Depends on zephyrproject-rtos/hal_stm32/pull/52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update mbedTLS commit along with the following fixes:
* Fix naming inconsistencies in some cipher modes, to match core mbedTLS
configs
* Add Kconfig to enable CTR cipher mode
Fixes#22421
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>