The SystemCoreClock variable must be placed in the '.shared' section for
the MAX78000 and MAX78002 because the ARM core is responsible for changing
the System Clock and updating the SystemCoreClock variable, and the
RISC-V core knows what the System Clock frequency is through the
shared variable.
Signed-off-by: Yasin Ustuner <Yasin.Ustuner@analog.com>
On SMP systems, threads going through k_thread_abort() may still
be running while the test moves on to the next one. This creates
some interferences and may result in the next test failing. So
after each test, we need to do k_thread_join() on those threads
to make sure they are no longer active.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Reviewer expectation was burried under contributor section, it deserves
to be on the same level and highlighted.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The text in this note is not accurate and should already be covered by
the license agreement, no need to say what the license already covers in
non-legal terms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test is overly sensitive to the relative timing of the devices
and/or their random number generation.
Due to this the test failed with its current setup when chanding the
random generation for the nrf54.
Let's work around it by offsetting a bit one of the devices.
This is a provisional workaround until the underlying issue is
addressed.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the new entropy driver for 54L devices and therefore
claim BT_CTLR_ENTROPY_SUPPORT is always supported
(note 54H remains unsuported)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch the default entropy driver for 54L05/10/15 devices to the new
CRACEN based one.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's default to this new driver.
And therefore change the conditions in the BT controller kconfig
which were selecting the native_posix fake entropy driver
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the new nrf hal CRACEN CTR DRBG driver including a new
kconfig option to enable it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models to the provisional branch zephyr_2025_01_14
which enables the use the not yet released CRACEN RNG & CM HAL
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
1069743a7fc06362e8f8d7f57225b8c7940da9f0
Including the following:
1069743 Fix in cracen hal conditional compile condition
3bbd3bd Enable build of hal/nrf_cracen_*.c
506da1f hal cracen_cm: Add const to prototype
b02d927 BLECrypt_if: For new aes_ecb scramble data if no libCrypto
e41f101 RRAMC nrf hal: Add replacements for new incoming RRAM APIs
4e933cf UART: Do not warn on invalid/unconfigured framesize
716b20c hal cracen_cm: Add replacements for new cracen_cm hal
fc597a4 CRACEN: Add CryptoMaster & CM AES (ECB only)
129f16c CRACEN RNG HAL: Remove senseless static inline
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase the size of the main stack for BLE applications to avoid
stack overflow on STM32WB0x series. Beacon sample was considered as
a reference for the size increase.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Added option to set the PACS Characteristics through the bap API,
making PACS configuration runtime available. Source and Sink PAC, as
well as Source/Sink PAC Location is can be set through a register
function in the PACS api.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
DT_SPEC related macro tests (ADC_DT_SPEC_GET_BY_NAME, MBOX_DT_SPEC_GET)
should not appear in this test because the configuration does not turn
on any devices
Move DP_SPEC-related tests to api_ext and enable the related device in the
configuration
fix#77205
Signed-off-by: Wenbin Zhang <freey7955@gmail.com>
This new option allows to export devices using identifiers generated
from the hash of the devicetree node path, instead of the device's
ordinal number. Identifiers generated this way are stable across
rebuilds.
Add new test cases to test this new option.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add a new set of macros that allow customizing the symbol name when
exporting symbols. This is useful when the symbol name that extensions
need to look up is different from the identifier used in the base image.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add a new "hash" attribute to all Devicetree EDT nodes. The hash is
calculated on the full path of the node; this means that its value
remains stable across rebuilds.
The hash is checked for uniqueness among nodes in the same EDT.
This computed token is then added to `devicetree_generated.h` and made
accessible to Zephyr code via a new DT_NODE_HASH(node_id) macro.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Fixes#84198.
If a '?' character is used as part of a wildcard resource, do not treat
this as the end of the string when comparing with a path from the HTTP
request. Only the path from the HTTP request may be terminated by '?'
(in the case of a request with query parameters).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
This test uses the bellboard interrupts for the application
and the radio core builds on nRF54H20 and nRF9280.
Since it uses the bellboard interrupts it makes sense to ensure
that bellboard is disabled in device tree to avoid runtime issues.
This is preparation work, bellboard is planned to be enabled
by default later and this makes sure that the test will
continue to work.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
With our builds for Arm M7 we are selecting FPU_SHARING and
MPU_STACK_GUARD. For that setup, we have
ARM_MPU_REGION_MIN_ALIGN_AND_SIZE=64 and
MPU_STACK_GUARD_MIN_SIZE_FLOAT=128. So worst case scenario,
we are going to have stack that is 64-byte aligned and
128-byte guard at the bottom of the buffer.
Fixes: #83714
Signed-off-by: Maciej Kusio <rysiof@gmail.com>
Make sure we are able to receive VLAN tag 0 packet, and
verify that reply packet is sent correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Packets are forwarded to the native interface or in other words,
the vlan header is simply stripped and ignored. This feature is called
'priority tagging'.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update the iterable numeric RAM/ROM tests to include a numeric value with
5 numeric characters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The headroom was not taken into account for variable size data
buffers when CONFIG_NET_L2_ETHERNET_RESERVE_HEADER was enabled.
Add a test case for it to make sure the reserve allocation works
properly.
Fixes#84053
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Clean up after automatic merge. Some test configurations got removed
and multiple lines enabling test for nrf54l09pdk/nrf54l09/cpuapp
target remained at the bottom of the file.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
uart120 requires device runtime to be enable. Enable it for nrf54h20dk.
When device runtime PM is used for interrupt driven and polling API
then UART device is initially suspended. It means that RX is disabled.
In order to enable RX device must be explicitly resumed using PM API.
Test is enabling UART RX (uart_rx_enable) from counter callback
(interrupt handler context). For fast instance on nrf54h20dk (uart120)
it is not allowed because PM resume can only be called from the thread
context. Because of that, test is skipped for uart120 and asynchronous
API.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Move enabling of counter to the test instead of test setup. Test may be
skipped in some configurations and in that case counter shall not be
started so by moving setup to the test code allows skipping test before
counter is started.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The function prototype / extern declaration for
z_x86_kpti_is_access_ok() in x86_mmu.h was missing a semicolon.
Add it to avoid being surprised by compile errors in certain
circumstances.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Fix compiler warning when optional property reset-gpios
is not supplied in the ti,tcan4x5x-compatible device tree
node
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
Rename the voltage_reference and power_down_mode
properties to voltage-reference and power-down-mode
in the devicetree and bindings of the DAC subsystem.
Signed-off-by: James Roy <rruuaanng@outlook.com>
