In all Nordic boards that contain ICs that support hardware stack
protection, turn it on by default so that we detect
stack overflows easier.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the structures so that they are compliant with the stricter checks
of GCC 10.x, and at the same time correct a bug that was present in the
handling of the GAP Start Advertising BTP command.
Fixes#28375.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When to->dticks is an int64_t it may happen that the calculated
remaining time is a value that cannot be exactly represented in the
destination int32_t, producing an implementation-defined result which
can include a signal (interrupt). Cap the maximum delay to the
largest value suported by the int32_t result.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
How to manage repositories that require authentication to fetch from
using west is a frequently asked question.
TL;DR on the answer is that Git already has credential storage built
in, so our expectation is that there is nothing west needs to do in
particular, as users can select whatever credential helper works for
them, or set up a custom one using something like the GIT_ASKPASS
environment variable.
That's not a very helpful expectation if people aren't aware that
credential helpers exist, though, so let's document that and provide
examples for common use cases, as well as west-specific
troubleshooting advice.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add regex in testcase.yaml to verify the kernel will dump
thread id information and error type when exception occurs.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Modify the location of the test case file because new
test cases need to be submitted. If the old test
cases are not in a folder, CI will fail and
prompts "the command exited with status 1".
Signed-off-by: Ying ming <mingx.ying@intel.com>
How-to guide has 0.11.3 SDK
Replace with the latest one SDK 0.11.4 in the documentation
description and links.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The boot code of x86_64 initializes the stack (if enabled)
with a hard-coded size for the ISR stack. However,
the stack being used does not have to be the ISR stack,
and can be any defined stacks. So pass in the actual size
of the stack so the stack can be initialized properly.
Fixes#21843
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using SCB_CleanInvalidateDcache instead of SCB_DisableDcache
& SCB_EnableDcache when config the non-cache area, in case
of the cache will effect the configuration of the non-cache
area
Signed-off-by: Crist Xu <crist.xu@nxp.com>
The pinnacle_100_dvk board fails this test, but it was added after the
legacy DTS supprot was deprecated so we will just exclude the board
from being built on this test.
Fixes#28480
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ESPI is supported in MEC15 chips but similar to PECI, I2C, eSPI bus
testing requires another device to act as eSPI host.
While this sample can be run in EVB the HW connection to a eSPI host
(Intel RVP) is not documented/supported.
Mark as not supported in that HW only in Modular card
(which setup is documented)
Also remove duplicate definition of the "depends_on: espi"
in the end of the sample.yaml file
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add release notes covering the various ARM DesignStart FPGA related
additions in Zephyr v2.4.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The sam_e70_xplained and sam_v71_xult boards doesn't have disable wdt
and board name configs. This add missing defaults.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The 3124c02 introduced the requirement of CONFIG_BUILD_OUTPUT_HEX be on
the boards' default configuration in order for the runner to be passed
the path to the hex file being loaded. Add missing configuration for
Atmel boards that uses OpenOCD for flash and debug.
Fixes#28337.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
- use sizeof(struct data_item_type) instead of sizeof(data_item_type)
- use struct data_item_type instead of invalid reference data_item_t
- add aligned typedef struct data_item_type example implemenation
- add note about checking return value for error message
Fixes#19684
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Change so that the caller of lwm2m_init_message is
responsible for generating a message id and remove message id generation
from lwm2m_init_message. Prevents generating a new id when the caller's
intent is to init a message with id 0.
Fixes#28283
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
message id 0 and token 0 have special semantics in the lwm2m engine,
they are used to request generation of new id, mark them as such.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Now that CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE defines a stack size, allow
for it to be configurable from a .conf file just like the rest of the
threads in Bluetooth.
Fixes#27768.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move the call to timing_init() earlier before function call
to get frequency. Some arch/SoC/board require initialization
before there is a valid frequency value. Or else the printed
value would not be useful.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Replaces the current zero length array for provisioner data with
ifdefs, to silence new gcc 10 warnings about array element access.
Fixes#28371.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added a note in documentation for k_mem_slab_alloc(),
k_mem_pool_alloc() and k_heap_alloc() are safe
to call in an interrupt with the timeout K_NO_WAIT.
Fixes: #28020
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
The correct return value is -ENOBUFS if we run out of network
buffers when sending the packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently the socket API is not thread safe so mention this in
socket API documentation. The plan is to add locks in 2.5 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sys_trace_thread_abort and z_thread_monitor_exit in
z_thread_single_abort also need to be protected by
sched_spinlock, otherwise when after the spinlock
release, if there is an pending interrupt, it will cause an
sched in the interrrupt exit, and those trace and monitor
function will never reach.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Changes to paging code ensured that the NULL virtual page is
never mapped. Since RAM is identity mapped, on a PC-like
system accessing the BIOS Data Area in the first 4K requires
a memory mapping. We need to read this to probe the ACPI RSDP.
Additionally check that the BDA has something in it as well
and not a bunch of zeroes.
It is unclear whether this function is truly safe on UEFI
systems, but that is for another day.
Fixes: #27867
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
0.5 Mhz with 100 ticks per sec leaves 5000 cycles per tick,
which broke some tests that assumed more work within 1 tick.
Set to 1 Mhz: balance multi-core simulation speed and tick duration.
Fixes#27943
Signed-off-by: Ruud Derwig <Ruud.Derwig@synopsys.com>
When probing for PCI-E device resources, it is possible that
configuration via MMIO is not available. This may caused by
BIOS or its settings. So when CONFIG_PCIE_MMIO_CFG=y, have
a fallback path to config devices via PIO. The inability to
config via MMIO has been observed on a couple UP Squared
boards.
Fixes#27339
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Coverity spots that null pointer is passing to flash_img_buffered_write.
This patch fixes the problem.
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
The USB infrastructure currently uses the system work queue for
offloading transfers, CDC-ACM UART transmission/reception, and device
firmware activities. This causes problems when the system work queue
is also used to initiate some activities (such as UART) that normally
complete without requiring an external thread: in that case the USB
infrastructure is prevented from making progress because the system
work queue is blocked waiting for the USB infrastructure to provide
data.
Break the dependency by allowing the USB infrastructure to use a
dedicated work queue which doesn't depend on availability of the
system work queue.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The z length modifier must be applied to avoid build errors when the
format is verified by the compiler on systems where size_t is larger
than int.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
