Fix bt_le_oob_get_local and bt_le_ext_adv_oob_get_local stuck forever
waiting for the sc_local_pkey_ready semaphore when SC HCI commands
are not supported in the controller.
By using the le_sc_supported helper function the runtime check of HCI
commands and the feature check of CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY
is combined to be handled int the same way.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the le_sc_supported helper function up in the source file so that
it can be re-used in other places without a forward declaration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The sam4l pinctrl contains two entries with wrong values. Fix the
typo to create valid pinctrl map.
Fixes#28538.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Since conn->send_data_total is of time size_t we need to use %zu or
we'll get build errors in sanitycheck on 64-bit platforms
Fixes#28605
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For boards with (relatively) large memory, the test which dumps
page tables takes a long time to finish. The default timeout of
sanitycheck is not enough for those boards. UP Squared board is
such a board. So limits to pagetable dumping to boards with
less than 32MB.
Fixes#28548
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If the network driver for some reason did not set the data in
the network packet properly, then just drop it as we cannot do
anything with just plain net_pkt.
Fixes#28131
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function will check that the net_pkt will contain some
data and return true in that case, and false if the net_pkt
is empty.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Algorithm for waiting for clock stabilization was failing in case when
it was waiting for clock availablity and clock was already available
before function was called. That is because nrfx_clock_is_running
was returning false because XTAL was already started but not yet
running.
Added a check for current LF source, if XTAL is picked that indicates
that RC is already running because of two stage startup procedure.
Added documentation of lfclk_spinwait with explanation of two stage
approach.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If hannel don't have alloc_buf and the RX MTU is configured to require
segmentation this warn the user and truncate the RX MTU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel that requires segmentation must set alloc_buf in order for the
stack to be able to reassemble segments of an SDU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case where ull_adv::disable() is disallowed, disable_mark is
erroneously re-mark instead of un-marked
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Initialize device pointer in driver's context.
It was not done quite right in commit a1708cf2f2
("drivers: ethernet: Fix device instance const qualifier loss"),
and then completely removed in commit 113d9274ea
("drivers: ethernet: remove stray expression")'
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
To improve Zephyr security, I decided to create a test
to check upon exit of a system call back to the calling thread,
the kernel scrubs CPU registers for sensitive data.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
If there is no handler for IPv4 broadcast packet, then ignore it
instead of trying to send an ARP message to resolve the senders
address.
Fixes#21016
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes the following issue:
When using slip without TAP, i.e. CONFIG_SLIP_TAP=n (default), while
another ethernet interface is enabled and sets CONFIG_NET_L2_ETHERNET=y.
This causes ethernet_init() to be wrongly called with struct dummy_api
instead of struct ethernet_api.
ethernet_init() expects struct ethernet_api (by cast), so we end up
with the get_capabilities field pointing to garbage!
Actually, as we are using the dummy api, we don't need to call
ethernet_init() at all.
Sole dependency on CONFIG_NET_L2_ETHERNET is wrong because it
can be enabled by another interface.
Signed-off-by: David Komel <a8961713@gmail.com>
When we wake-up of deep sleep power state, we want to disable it.
Otherwise, when the cpu will go next to idle mode during a
SYS_POWER_STATE_ACTIVE, it will go into deep sleep mode
instead of a sleep mode.
fixes: #26896
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
Accourding to the spec the CCC descriptor may occur in any position
within the characteristic definition after the Characteristic Value.
Fixes#28324
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_UUID_ES_TRIGGER_SETTING was incorrectly using
BT_UUID_ES_MEASUREMENT_VAL as value instead of
BT_UUID_ES_TRIGGER_SETTING_VAL.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix for handling REJECT_IND PDU received for PHY Update,
Connection Parameter Request and Data Length Update control
procedures.
If a link layer control procedure collision occurs, example
with local initiated PHY Update Procedure, and peer sends a
REJECT_IND PDU, then the PHY Update Procedure is stalled.
Fixes#28282.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The on-board LED of the blue and black variants of these boards have LED
logic inverted. This was never observed as most of the time, the LED was
used as a blinky. Fix this by setting its DT bindings to active low.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Named choice is needed in order to be able to extend it
in other modules.
Closes: #28559
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
According Mesh Profile Spec 5.4.2.4 Authentication, if device
use Input OOB Authentication method, should send input complete
pub after local public key has been acked.
`bt_mesh_input_string` or `bt_mesh_input_number` directly send
`input_complete`, however does not check whether the pub key has
been sent.
Mesh Provisioning timeout set to `60` seconds, so even this
probability is extremely low, it does not mean that there is no
such probability.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
CPU Cortex-M implies Mainline Cortex-M, therfore, the dependency
on ARMV6_M_ARMV8_M_BASELINE is redundant and can be removed. The
change in this commit is a no-op.
We also add the ARMV6_M_ARMV8_M_BASELINE dependency on option
CPU_CORTEX_M0_HAS_VECTOR_TABLE_REMAP to make sure it cannot be
selected for non Cortex-M Baseline SoCs (at least, not without
a warning).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This STM32 serie redefines function relocate_vector_table()
It should take into account features:
SW_VECTOR_RELAY and SW_VECTOR_RELAY_CLIENT
fixes#28289
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Tracing switched in threads in C code does not work, it needs to happen
in the arch_switch code. See also Xtensa and ARC.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some cases we were returning empty thread names, so make sure we
check for the thread names correctly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead if printing the line number, output the context (thread,
semaphore, mutex, ..) and the ID of the event where applicable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the option to disable kernel memory pool when
multithreading is also not enabled. This saves some
code space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds a kconfig CONFIG_KERNEL_MEM_POOL to decide whether
kernel memory pool related code is compiled. This option
can be disabled to shrink code size. If k_heap is not
being used at all, kheap.c will also not be compiled,
resulting in further smaller code size.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This uses the new macros so the common kernel objects can be
garbage collected if they are not referred directly anywhere
in the code. This is useful for reducing library data size
as not all library functions and their corresponding kobjects
are being used.
Fixes#20663
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The iterable section macros Z_ITERABLE_SECTION_ROM()/_RAM() uses
Z_LINK_ITERABLE() which does KEEP() on all symbols. This results
in all symbols under those sections being kept in final image
even though these symbols are not referred directly from the code.
This adds the new set of macros which does not force KEEP() on
the symbols, and allows symbols to be garbage collected.
The existing macros are kept as-is so as not to change their
behaviors.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix bug in device name shortening handling leading to memory
corruption.
This is triggered by an underflow in the length field of the shortened
name when set_data_len + 2 > set_data_len_max.
Fixes: #27693
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Ignore error when failing to set the passive scanner private address.
This can happen because in between the time we checked if the
advertiser was enabled and the time we execute the set random address
command the state of the advertiser could have changed in the
controller, and we only set the state once the command has completed
in the controller.
Fixes: #25672
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix not setting NRPA before starting scanner.
Occurs with BT_PRIVACY=n and BT_EXT_ADV=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We need to have timer that closes the connection for good if
we do not get the FIN and ACK reponse from the peer.
If there is any pending data when application does close(),
send them before sending FIN.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
