Add definition for the Adafruit Data Logger Shield. This shield is
equipped with a PCF8523 RTC, an SD card slot, a couple of user LEDs
and a prototyping area.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Initial board configuration for NPM1300_EK.
Includes configuration for regulators and GPIO only.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Convert the ft5336 to the input subsystem, fix all the config in the
repository and add the Kscan compatibility driver to the current dts
driver instances.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The building sensor shield has several useful sensors including a 6 axis
inertial sensor, 3 axis magnetometer, optical light sensor, temperature and
humidity sensor, and connectors for offboard temperature sensors.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add plli2s node to dts/overlay file for boards that already use I2S.
Remove old I2S Kconfig not used anymore
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add initial support for the nPM1100 EK. The EK is expected to be
connected to Arduino header pins (D2/3/4/5).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add entries for the BUCK0/1/2/3 and LDO0/1 regulators. Note that voltage
min/max limits have been set to the hardware limits. They can be
adjusted using overlays in applications, depending on the consumer
circuit constraints.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a sample that demonstrates usage of the nPM6001 PMIC (all of its
functionalities).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When moving nodelabels to <device_name>_<shields_name>, '-' included
in <device_name> was then introduced in the device nodelabel.
But '-' isn't an allowed nodelabel character, hence this is breaking
compilation with those shields.
Convert '-' to '_'.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Shield's nodelabels should now be in the form <device>_<shield_name>.
Besides changing the nodes nodelabels, their usages should be fixed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When adding nodelabels to shields devices, it should be taken car not to
use forbidden characters.
Fix existing occurrence.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This nodelabel was changed while converting all shields to new nodelabel
scheme.
On this particular nodelabel, there was no change to be done, as it doesn't
refer to a node defined in the shield.
Revert this chagne.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit updates the outdated link for the "DFRobot CAN BUS Shield
V2.0 schematic."
The repository containing this file has been renamed to
"DFRobot/DFRobot_MCP2515".
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the outdated link for "link board ETH Website" with
that of the "reel board," which contains the information on the "link
board ETH."
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Use shield-specific sdhc devicetree nodelabels in order not to clash with
sdhc nodelabels from the board devicetree.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add GoodDisplay GDEW042T2 with fast partial refresh. Based on
configuration from GoodDisplay's Arduino example.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Introduce the concept of refresh profiles which are specified as a
child node in the device tree. This makes it possible to use different
overrides for different types of refreshes (full/partial).
The only profile that is currently supported is the "full" profile.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
We're now taking the kscan device from the zephyr,keyboard-scan node. Add
it to the overlay.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Now that Wifi drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
The boards folder uses ~142.8 MB, being the largest in the repository.
This is due mostly to board images, which are in most cases not
optimized for web content. This patch tries to address this problem by
converting all pictures to JPEG (quality 75) and by adjusting its size
up to 750 px (the width of the documentation content). Images that
specified a fixed width in rst files are converted down to that value
instead.
With this patch, folder goes down to ~53.5 MB from 142.8 MB (-~63%).
Note that this patch introduces a new set of binary files to git
history, though (bad).
The process has been automated using this quickly crafted Python script:
```python
from pathlib import Path
import re
import subprocess
def process(doc, image, image_jpeg, size):
subprocess.run(
(
f"convert {image}"
"-background white -alpha remove -alpha off -quality 75"
f"-resize {size}\> {image_jpeg}"
),
shell=True,
check=True,
cwd=doc.parent,
)
if image != image_jpeg:
(doc.parent / image).unlink()
for doc in Path(".").glob("boards/**/*.rst"):
with open(doc) as f:
content = ""
image = None
for line in f:
m = re.match(r"^(\s*)\.\. (image|figure):: (.*)$", line)
if m:
if image:
process(doc, image, image_jpeg, size)
image = Path(m.group(3))
if image.suffix not in (".jpg", ".jpeg", ".png"):
content += line
image = None
continue
image_jpeg = image.parent / (image.stem + ".jpg")
size = 750
content += (
f"{m.group(1)}.. {m.group(2)}:: {image_jpeg}\n"
)
elif image:
m = re.match(r"\s*:height:\s*[0-9]+.*$", line)
if m:
continue
m = re.match(r"\s*:width:\s*([0-9]+).*$", line)
if m:
size = min(int(m.group(1)), size)
continue
content += line
if line == "\n":
process(doc, image, image_jpeg, size)
image = None
else:
content += line
with open(doc, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The SSD16xx driver currently hard-codes a couple of register overrides
that aren't relevant or even correct for many devices. Make them
optional device tree properties instead.
Note that this changes the behavior for panels that expect
SSD16XX_CMD_DUMMY_LINE and SSD16XX_CMD_GATE_LINE_WIDTH to be set by
the driver. This fixes a bug where the incorrect value
was written to all SSD16xx panels except for GDEH0213B1 and GDEH029A1.
The overlay files for devices that need dummy line and gate line width
to be specified have been updated as a part of this commit.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Now that ethernet drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update lvgl for devicetree updates to use zephyr,keyboard-scan.
Remove Kconfig symbol (LV_Z_POINTER_KSCAN_DEV_NAME) that don't exist
anymore since these values are coming from devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that ft8xx drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that eeprom drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Devicetree aliases, accel0 and magn0, were recently introduced to enable
sensor sample applications to support multiple sensor drivers of the
same type and thereby reduce the number of driver-specific sensor sample
applications.
This was implemented by adding devicetree nodelabels to accelerometer
and magnetometer sensor nodes, which unfortunately can suffer from
naming conflicts when using shield boards. Fix the problem by appending
the I2C bus address or SPI chip select to the devicetree nodelabel for
sensor nodes on shield boards only. Base boards are left alone to keep
their nodelabels as short as possible.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable the IEEE 802.15.4 radio node on all boards that listed
'ieee802154' in the supported field.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Have the kscan device enabled in devicetree will now get the driver
enabled by default when CONFIG_KSCAN=y is set. So we can remove
driver enabling Kconfig values in various Kconfig.defconfig files.
Signed-off-by: Kumar Gala <galak@kernel.org>
We now 'select I2C' and/or SPI bus in Kconfig in the sensor driver
Kconfig's so there is no need to have boards do the following:
config I2C
default y if SENSOR
config SPI
default y if SENSOR
Signed-off-by: Kumar Gala <galak@kernel.org>
Have the display enabled in devicetree will now get the driver
enabled by default when CONFIG_DISPLAY=y is set. So we can remove
setting driver enabling Kconfig values in various .conf and
defconfig files.
Signed-off-by: Kumar Gala <galak@kernel.org>
All IEEE 802.15.4 drivers are now automatically enabled if they are
'okay' in DT and all of its dependencies are 'y', including
CONFIG_IEEE802154. This means individual driver enablement is not
necessary anymore in Kconfig.defconfig files or samples/tests. Boards
need to still make sure any dependencies are enabled, e.g. SPI bus in
some cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Set accel0 alias for all boards with the LSM6DSO accelerometer
to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Set accel0 alias for all boards with the LSM6DSL accelerometer
to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Set accel0 alias for all boards with the ISM330DHCX accelerometer
to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Set accel0 alias for all boards with the LIS2DH and compatible
accelerometer to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Set accel0 alias for all boards with the LIS2DW12 accelerometer
to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Set accel0 alias for all boards with the FXOS8700 and compatible
accelerometer to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Set accel0 alias for all boards with the ADXL362 accelerometer
to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Set accel0 alias for all boards with the IIS2DLPC accelerometer
to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
For boards with an accelerometer, configure the appropriate bus
(I2C or SPI) default to be enabled if the sensor driver class was enabled.
This change makes no need to add a bunch of board-specific configuration
overlays to the application.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
