Configures lpuart3 pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures flexcomm2 to operate in USART mode and enables the associated
peripheral clock and pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures flexcomm4 to operate in USART mode and enables the associated
peripheral clock and pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This shield is working out of the box on Arduino connector,
even if it is not with all standard Arduino SPI CS/CLK pins.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Switch from using internal 6pf to internal 7pf load capacitor for LFXO.
Use a default clock accuracy of 50PPM as this matches lab results.
50PPM should be sufficient for common operating temperatures of
25degC +- 15.
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
When frame counter is managed by the radio driver the upper layer
needs to be informed about the frame counter changed. The upper layer
looks for the most recent frame counter in the transmitted frame,
this is why the tx_payload need to be updated after processed by
the radio driver.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fixed issue that caused message to be not correctly reset even after
it is consumed after send sets errno to EAGAIN or EWOULDBLOCK
Signed-off-by: Dominik Dess <dominik.dess@grandcentrix.net>
Removing the CONFIG_TEST=y setting from the TF-M
integration samples prj.conf. TEST does not need
to be enabled in these samples.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The EFR32MG21 doesn't have a RMU and thus the driver isn't relevant for
that SoC series. Add a Kconfig exclusion so the driver isn't available
on EFR32MG21 SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow the use of build configurations from testcase/sample yaml files.
This addition makes it easy to build a sample or a test with the options
provided in the test file by pointing to the test section to be built on
the command line of `west build`.
Fixes#31993
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Correct MEC15xx HAL value for DnX warn.
For consistency add automatic ack into the driver.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Fixes: #36101
The move of CMake invocation to a dedicated custom target, see #34868
results in tfm_cmake to always be considered out-of-date, causing CMake
to be reinvoked in the TF-M Binary dir, which again results in the
build command to rebuild.
This commit moves the invocation to a custom command with the
CMakeCache.txt as output. The custom target tfm_cmake is updated to
depend on CMakeCache.txt.
This mean that CMake for TF-M will only be invoked inside the Zephyr
build command if that file is missing.
If the CMakeCache.txt file is updated or TF-M CMake or source code is
modified, then the build command inside the TF-M build folder will
ensure correct re-run of CMake from within the TF-M build folder.
This ensures that TF-M will still rebuild if TF-M code is modified,
while at the same time avoid unnecessary rebuilds of TF-M code.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Enable building the LMP90xxx driver (move devicetree nodes over from the
sensors/spi.dtsi). Limit to building on a single platform as this
is just making sure the drivers compile.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The testcase.yaml had multiple tests defined but they didn't do anything
different. Remove the duplication and rename to drivers.hwinfo.api.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The new userspace work queue API is not C++ compatible.
When changing from old API to new API (commit
b706a5e999, 4e3b926) the C++ compatibility
was lost.
Signed-off-by: Fredrik Gihl <fredrik.gihl@flir.se>
Fix wrong channel index send by controller in connectionless
IQ samples report. Former implementation reported value from
lll->data_chan_id which is not valid channel index.
Updated implementation reports value stored in IQ samples receive
node during periodic scanning event preparation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Out-of-tree boards directory is likely to have boards within subset of
architectures (e.g. only 'arm' boards) that are supported by Zephyr.
Currently script iterates over all architectures and tries to list
contents of boards/<arch>/, which might not be existing. This results in
'FileNotFoundError' exception:
Traceback (most recent call last):
File "/project/zephyr/scripts/list_boards.py", line 113, in <module>
dump_boards(find_arch2boards(parse_args()))
File "/project/zephyr/scripts/list_boards.py", line 32, in \
find_arch2boards
arch2board_set = find_arch2board_set(args)
File "/project/zephyr/scripts/list_boards.py", line 45, in \
find_arch2board_set
for arch, boards in find_arch2board_set_in(root, arches).items():
File "/project/zephyr/scripts/list_boards.py", line 78, in \
find_arch2board_set_in
for maybe_board in (boards / arch).iterdir():
File "/usr/lib/python3.9/pathlib.py", line 1149, in iterdir
for name in self._accessor.listdir(self):
FileNotFoundError: [Errno 2] No such file or directory: \
'/project/app/boards/arc'
Simply ignore missing boards/<arch>/ directories and skip to the next
arch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fixes ticker_by_next_slot_get for JIT scheduler by allowing iterating
through ticker nodes without ticks_slot information, and improves
performance for legacy ticker scheduling use.
To reduce the processing and context switching overhead, a new feature
is introduced via BT_TICKER_NEXT_SLOT_GET_MATCH, by which an operation
callback may be added via the ticker_next_slot_get_ext interface, and
the match function is then called when the ticker_job is processing the
request.
By returning true in this callback, iteration stops and normal operation
callback is invoked. If the match function returns false, node iteration
continues. This reduces the number of ticker_job executions for node
iteration.
Signed-off-by: Morten Priess <mtpr@oticon.com>
We do not need the if BUILD_WITH_TFM guard in the main
Kconfig file, as the guards are present insude the respective
Kconfig files that are sourced by the main Kconfig.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The TF-M project is higly configurable and we end up having
a growing number of Kconfig option definitions in the main
Kconfig file. This commit splits out the configuration options
for the TF-M partition and for the crypto partition configuration
into separate Kconfig files, for ease of reading. The commit
does not introduce behavioral changes.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Always source the Zephyr base soc and shield (board root) Kconfigs
directly from Kconfig instead of generated Kconfig files.
This has the benefit that it is no longer necessary to generate Kconfig
files to source SoC root and shield (board root) when no custom roots
are provided.
Also this cleans up the doc/CMakeLists.txt and ensures that the
doc/CMakeLists.txt is not getting out of sync with the Kconfig.cmake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The stack frame size, used for context switch, is rounded up to 16-bytes
alignment. Therefore, we need round down the pointer of top of the
pre-populated stack frame so that the preserved stack frame size is also
rounded up to 16-bytes alignment.
Fixes#29535
Signed-off-by: Shih-Wei Teng <swteng@andestech.com>
Since physical memory is no longer wholly identity mapped,
it is not needed to set the VM size to be larger than
physical memory size. The VM size was 2GB (max physical
memory size of x86 boards) + 1GB (for memory mappings).
So simply shrink the size to 1GB, as the kernel size is
small and we still have a large chunk of space to do
memory mapping.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With ACPI doing dynamic memory mapping and unmapping
to access ACPI tables, there is no need to identity
map all the physical memory anymore. So remove
the "select" statement in ACPI kconfig.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of accessing ACPI tables through physical address, do
memory mapping/unmapping so they can be accessed via virtual
addresses. This allows us to avoid identity mapping all
physical memory, and thus no need for a page table large enough
to map everything.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This limits the search for Extended BIOS Data Area (EBDA) to
0x80000 to 0x100000 as this is usually the area for it.
If 0000:040e has an address not pointing to this area, it is
probably an invalid address, and should not be de-referenced
to avoid segfault.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add the packet status flag value to the iso receive info
struct. This will allow an application to handle potential
lost or erroneous messages.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
To support west OpenOCD path image flashing, this generates an npcx hex
image from the npcx BIN image. Moreover, this also changes the name of
npcx output image by CONFIG_KERNEL_BIN_NAME.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Create the pinmux phandle to the ADC driver node in the
devicetree. When the pinmux_pin_set function in
adc_it8xxx2_channel_setup can refer to the setting of
this phandle. It is more flexible to use.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The current approach with storing RPL by timeout doesn't solve all
issues as the node may loss power before the timer is fired.
In addition to that this may wear out flash quickly if short timeout is
used.
This change adds an API to store the pending RPL entry upon user
request. Additional Kconfig option allows to completely disable timer
so that the whole storing relies on the user.
The mesh stack still stays responsible for outdating RPL entries in case
of IV Index update as this happens implicitly for the user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
* MCUboot was build only for frdm_k64f in zephyr CI.
Extended Zephyr-RTOS integration platform by nrf52840dk_nrf52840
and nrf52840dongle_nrf52840 which allow to build MCUBoot on
these platform in Zephyr-RTOS CI.
* Added AES256 support for image encryption
* zephyr: serial: Remove unnecessary call to irq_unlock
* boot_serial: Port encoding to use cddl-gen
* bootutil_public: Make boot_read_swap_state declaration public
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
