Remove v1 implementation from log_core and all references in the tree.
Remove modules used by v1: log_list and log_msg.
Remove Kconfig v1 specific options.
Remove Kconfig flags used for distinction between v1 and v2.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This embeds the log message source IDs inside the origin unit
as module IDs in Sys-T messages. This allows Sys-T message
parsers to see where the log messages are coming from.
This is enabled by default if using Sys-T catalog messages as
the collateral XML file contains the information to interpret
the module ID.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Timestamps can be 32 or 64 bit long based on the platform and
build configurations. The proper way to handle these timestamps
is to use the ad-hoc log_timestamp_t variable.
This patch fixes some timestamp's reference which were still
using uint32_t changing them to log_timestamp_t.
Moreover also a new config is added in order to print the
timestamp as the Linux's kernel format. This might be useful
in AMP platforms in which Linux's and Zephyr's logs must be
interleaved in order to get a more comprehensive log solution.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add support for new API's log_backend_format_set and
log_format_set_all_active_backends to switch the logging format
for one backend and for all the active backends respectively.
Using format_set function pointer in log_backend_api struct as a hook
to set the log format at runtime in the backends. Add function pointer
table with helper functions to be used as a way to select log format.
Add supported log format types as macros to use with the API.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Pointer to int was passed to a function which expected pointer to
uint8_t. There was an unexpected content for big endian as the
highest byte was read instead of the lowest which contained valid char.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Reduced logging mode selection to deferred, immediate, minimal and
frontend. Decoupled logging version from mode and created CONFIG_LOG1
which can be used to explicitly select deprecated version.
From now on, chosing CONFIG_LOG_MODE_{IMMEDIATE,DEFERRED} will result
in version2.
Deprecated CONFIG_LOG2_MODE_{IMMEDIATE,DEFERRED} with cmake warning.
Codebase adapted to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Hexdump via logging is supposed to be human-readable for
debug information. Therefore, it should actually print
in human-readable form (well... after some magical decoder
has processed the raw MIPI Sys-T output).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adding functions log_output_msg2_syst_process and hexdump2_print
to support v2 logging subsystem.
Updates west.yml to pick up a new version of the MIPI sys-t library that
supports vprintf.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Tag can be changed at runtime. Feature is enabled by setting
maximum tag length to positive value. Additionally, default
tag can be configured in Kconfig.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Info log messages don't have dedicated color which
makes them harder to separate from debug logs.
Introduce green color in log output for info level
so it stands out like error and warning messages do.
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
Even though it's highly unlikely that a component of time
would ever approach INT_MAX, use the unsigned specifier to mitigate
any unexpected behaviour.
Fixes#36814
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
So far we only have log_msg_timestamp_get() function, which returns
internal timestamp representation. This is either clock cycles or uptime
in ms, depending on main clock precision.
Introduce log_output_timestamp_to_us() helper function, which allows to
convert internal logging timestamp to us.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
In std_print(), the log arguments were casted to uint32_t before
being sent further to the output function.
For integer types which can not be represented by uint32_t, the
degraded user experience may be acceptable.
However, for string arguments, the output function will eventually
dereference the pointer, so if the "char *" can not be represented
by uint32_t, bad things are going to happen. In practice you will see
this on 64-bit systems where sizeof (char *) is 8 byte and addresses
higher than 0x80000000.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Uart device is unique and thus does not need to be passed through the
logging context. Only the assert() requires a void * cast.
On log_output side, the device usage was removed. It is actually unclear
why it has been set like this since depending on the context, it can be
anything and not specifically a device.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
The log output instances all named "log_output" in backends
collide with the "log_output" parameter of various functions.
This renames the variables in the backends to make them
more descriptive. Same goes for the buffers for some of
these instances as they are all named "buf", and "hostname"
being used in the network backend, so they are renamed.
There are a few places where variables are overriden within
an inner scope (e.g. inside loop and if block) so they are
also renamed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When using net log backend,
adding severity and function name to log message.
The log module name is a useful information when looking
at log entries. This way remote log entries will
contain the log module name.
Signed-off-by: David D <a8961713@gmail.com>
When in immediate mode ensure that buffering is not used in log output.
Every byte is pushed to the transport.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The hexdump was earlier printed using 8 bytes in one line like this
[00:00:00.131,143] <wrn> sample_instance.inst2: Example of hexdump:
01 02 03 04 05 06 07 08 |........
09 0a 0b 0c 0d 0e 0f 10 |........
11 12 13 14 15 16 17 18 |........
19 1a 1b 1c 1d 1e 1f 20 |.......
21 22 |!"
This is not utilizing the width of the output best way possible.
Better utilization of the output is to print 16 bytes in one line
like this:
[00:00:00.131,136] <wrn> sample_instance.inst2: Example of hexdump:
01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 |........ ........
11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 |........ .......
21 22 |!"
In order to make it easier to find / calculate the bytes in the
output, print the output bytes in 8 byte groups.
This has the benefit that it is easier to map the Zephyr hex output
to Wireshark output which prints the bytes like this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Previously, _prf function was used when present and _vprintk
was used otherwise. _prf supports reacher formatting but at
cost of 3k flash and >250 bytes on stack. Stack usage then
depended on which function was used and that was causing
troubles when trimming stack sizes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
The new Logger subsys uses a very robust formatter function in minimal
libc: _prf(). This adds up to ~3K flash. For resource constrained
devices running samples that don't use the extra formatting options,
allow them to select LOG_DISABLE_FANCY_OUTPUT_FORMATTING to revert
back to vprintk.
MCUBOOT is one such sample that has a very limited amount of output
and benefits from the flash savings due to small bootloader partition
sizes.
Signed-off-by: Michael Scott <mike@foundries.io>
Added functions for processing log string and hexdump. Details
are passed as function parameters and not as log_msg. Those
functions can be used when logger works in synchronous mode
and log messages are not created.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
MISRA-C has several rules about switch statements like each clause
end with an unconditional break. This commit fix these problems to
be in accordance with the standard.
MISRA-C rules 16.1, 16.3 and 16.4
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Extended log_output interface to handle dropped
messages. Log_output is printing a message containing
number of dropped messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended logger configuration to allow function name prefix for
messages with certain severity levels. By default only debug
messages are prefixed with function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Allow logging subsystem to send the logging messages to outside
system. This backend implements RFC 5424 (syslog protocol) and
RFC 5426 (syslog over UDP).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Log_output module was always postfixing printk strings
with '\r'. If printk message did not ended with '\n'
it lead to last printk message being overwritten.
Fixed by adding '\r' only when string was ended by '\n'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According with MISRA-C and unconditional break statement must
terminate every switch-clause.
MISRA-C rule 16.1 and 16.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Extended support in the log_core and log_output to 15 arguments
which is the hard limitation of log message format.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
