For RTC0 events the RTC1 pretick event was not cleared what caused the
WDT to be not stopped. This resulted in increased power usage.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Since #53979, runtime PM can be applied on serial device used by console.
While it should be transparent on serial driver side as the application
(console in this case) is driving the PM runtime requests, on STM32
it requires some modification on serial driver as UART interrupts are
generated to handle internal power management house cleaning.
When these interrupts are generated, PM runtime should also be driven
to ensure clock availability when treating the uart ISR.
On STM32, some additional changes are required
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
These macros have been deprecated since v3.2.0. So remove them.
() K_KERNEL_STACK_EXTERN
Use K_KERNEL_STACK_DECLARE instead.
() K_KERNEL_STACK_ARRAY_EXTERN
Use K_KERNEL_STACK_ARRAY_DECLARE instead.
() K_KERNEL_PINNED_STACK_ARRAY_EXTERN
Use K_KERNEL_PINNED_STACK_ARRAY_DECLARE instead.
() K_THREAD_STACK_EXTERN
Use K_THREAD_STACK_DECLARE instead.
() K_THREAD_STACK_ARRAY_EXTERN
Use K_THREAD_STACK_ARRAY_DECLARE instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Leave the malloc partition so that it only contains the heap itself; this
lets the initialization code adjust the address range when configuring the
arena at startup.
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of adding every possible subsystem which places variables in the C
library memory partition in libc-hooks.h, place those conditions in the
related Kconfig files and simplify the libc-hooks.h to just looking at
CONFIG_NEED_LIBC_MEM_PARTITION.
Signed-off-by: Keith Packard <keithp@keithp.com>
The malloc arena/heap size setting can be adjusted using different
Kconfig options, depending on the libc implementation. This means
prj.conf can't be used to set this value on projects that can be built
for multiple libcs without generating a Kconfig warning.
Note: similar fix was applied for the hash_map sample, see
7ef8911e8c
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds a note on how to configure and what to beware of when
disabling mutex support in a multithreading application
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a note on how to configure and what to beware of when
disabling mutex support in a multithreading application
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
There seems to be a copy-paste error where GetDMAError() et al is used
twice. The comment states that it is actually getMACError() et al that
should be used in the second instance.
Signed-off-by: Stefan Petersen <spe@ciellt.se>
The runnable output from the build system is the
exe file. In native_posix the elf happend to also be
runnable, but this is not the case in general,
and not for native_sim or the nrf5*bsim boards.
So lets use the exe instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add the exe fle to the runnerconfiguration class,
so we can use it from runners which will need it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
PR #63195 has managed to change code under test without
triggering those tests.
This change should remedy that by creating a new workflow,
based on twister_tests.yaml, that runs tests in
scripts/tests/build_helpers if build_helpers are modified.
Such a workflow should be easily extendable if we ever have more
non-Twister things to test in scripts/pylib.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
PR #63195 has changed how Domains work without
triggering necessary tests, thus breaking them.
This commit fixes the domains tests.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
If flash_order were to be missing from the YAML, the Domains init
would crash instead of substituting an empty list.
This commit fixes that.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
According to the ASCS_v1.0 the ASE in Streaming state shall transit to
QoS Configured state when link loss happen.
Relates: ES-24215 (errata)
Fixes: BAP/USR/SCC/BV-168-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When backlight pin is not defined, a display suspend will cause
a crash since it looks at the wrong pin when deciding if
it exists.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Pass only speficied number of handler to read_params for GATT read
multiple. This is to avoid sending invalid (zeros) handles in
ATT_READ_MULTIPLE_REQ.
This was affecting GATT/CL/GAR/BI-18-C and GATT/CL/GAR/BI-19-C
qualification test cases.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds bits about partially enabling warnings on shadow
variables for a subset of in-tree code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds some bits on added Xtensa MMU support, refactoring of
ESP32 folder, and various board additions/removals.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Limit the number of the copied ssid to WIFI_SSID_MAX_LEN
and avoid a possible one byte overflow.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Per the MX25UM51325G datasheet, all page programs in OPI DTR mode need to
start at an even address, and be of even length. Update the minimum
write size reported by the driver and check all writes when OPI DTR mode
is enabled, so that subsystems using the flash driver can align to this
requirement.
Fixes#63639
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add changes to Ethernet and Wi-Fi drivers for v3.5.
Also add information about generic Ethernet and Wi-Fi changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This was already excluded from
libraries.libc.newlib_nano.thread_safety.userspace.stress and it's now
failing in libraries.libc.newlib.thread_safety.userspace.stress as well.
The issue is being rootcaused to a toolchain issue but a proper fix has
not been identified yet, exclude that test as well in the meantime.
Link: https://github.com/zephyrproject-rtos/zephyr/issues/61129
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The can_sja1000_handle_error_warning_irq() function should only attempt to
start bus-off recovery, but not wait for the result.
Fixes: #63712
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
